DP Fix for sale

taz2ko0 · 05-14-2021, 11:49 AM

Quote:

Originally Posted by Antetokounmpo

Found you on ebay, but I will buy one here for some profit into your pocket.

Shipped Thanks!

Antetokounmpo · 05-17-2021, 12:22 PM

Is there a TLDR to get the car to readiness once installed? Don't really feel like reading through dozens of posts. Would be nice to link to the OP too if there is one.

taz2ko0 · 05-19-2021, 03:56 PM

Quote:

Originally Posted by Antetokounmpo

Is there a TLDR to get the car to readiness once installed? Don't really feel like reading through dozens of posts. Would be nice to link to the OP too if there is one.

Here is the link to the manual

https://m.imgur.com/a/FSnWr

I would start at the 5 o'clock position first. And depending on the codes is how you adjust the unit. If you have any questions please let me know.

BrazjhanN54 · 05-20-2021, 01:44 PM

Quote:

Originally Posted by taz2ko0

Nice. Sorry for the Miss understanding. Happy it worked out for you.

I still don’t know how to go about adjusting this unit and fine tuning it. The directions don’t really explain well. Do I turn it to the right to make it stronger and what does ohms mean ??

taz2ko0 · 05-20-2021, 02:39 PM

Quote:

Originally Posted by BrazjhanN54

I still don’t know how to go about adjusting this unit and fine tuning it. The directions don’t really explain well. Do I turn it to the right to make it stronger and what does ohms mean ??

With the cables facing up set the dial to the 5 o'clock position. Make sure that the arrow is facing the 5 o'clock position. Reset the codes and go for a drive (about 100 miles). Depending on the codes depends which way the setting needs to go. Also make sure that you are on the stock map/tune with the any auto clear function disabled. Hope this helps. If you have any questions please let me know.

iDriveSlo · 05-20-2021, 07:23 PM

PM'd

taz2ko0 · 05-20-2021, 08:29 PM

Quote:

Originally Posted by iDriveSlo

PM'd

Pm Replied

Antetokounmpo · 05-24-2021, 11:48 AM

Quote:

Originally Posted by taz2ko0

With the cables facing up set the dial to the 5 o'clock position. Make sure that the arrow is facing the 5 o'clock position. Reset the codes and go for a drive (about 100 miles). Depending on the codes depends which way the setting needs to go. Also make sure that you are on the stock map/tune with the any auto clear function disabled. Hope this helps. If you have any questions please let me know.

Do you know if it needs to be ≈100 miles continuous, or will it complete a cycle after 100 miles of commuting/normal driving over multiple days? I have only put on about 40 miles since installing, no codes yet, flashed to MHD stage 0.

taz2ko0 · 05-24-2021, 01:29 PM

Quote:

Originally Posted by Antetokounmpo

Do you know if it needs to be ≈100 miles continuous, or will it complete a cycle after 100 miles of commuting/normal driving over multiple days? I have only put on about 40 miles since installing, no codes yet, flashed to MHD stage 0.

As long as you have 20~30 miles of highway miles non-stop. It could take a few trips up to 100 miles. The ecu needs to do some internal checks before setting.

BrazjhanN54 · 05-26-2021, 12:07 PM

When I want to remove it, can I just pull the entire unit out of the JB4 and I’ll be fine ? Or do I need to replace the jb4 wires that were there already

taz2ko0 · 05-26-2021, 03:12 PM

Quote:

Originally Posted by BrazjhanN54

When I want to remove it, can I just pull the entire unit out of the JB4 and I’ll be fine ? Or do I need to replace the jb4 wires that were there already

You will need to replace the wires that were removed.

APATHTC · 06-01-2021, 08:36 PM

The manual posted references three wires - 19,20 & 23. Unfortunately, my wiring harness for my 2008 335i looks absolutely nothing like what is pictured. Pin positions 19, 20 and 23 on my connector are empty. I have searched all over the internet including this forum for some help and have come up empty. I do not have a JB4 and I still have my O2 sensors installed. Can someone please tell me what exactly pins 19, 20 and 23 are referencing?

taz2ko0 · 06-02-2021, 10:40 AM

Quote:

Originally Posted by APATHTC

The manual posted references three wires - 19,20 & 23. Unfortunately, my wiring harness for my 2008 335i looks absolutely nothing like what is pictured. Pin positions 19, 20 and 23 on my connector are empty. I have searched all over the internet including this forum for some help and have come up empty. I do not have a JB4 and I still have my O2 sensors installed. Can someone please tell me what exactly pins 19, 20 and 23 are referencing?

It should be the same unless you are looking at the wrong connector. Can you take a picture of what your are looking at.

taz2ko0 · 06-08-2021, 01:08 PM

bump

taz2ko0 · 06-14-2021, 04:49 PM

bumps

taz2ko0 · 06-21-2021, 10:59 AM

Happy Father Day Bump

Will335i · 06-23-2021, 02:10 PM

I bought from you off of ebay before I saw it here. Quick question for you. Can I install this without the JB4? I currently have a JB4 installed but plan to take it out and just run the MHD.

taz2ko0 · 06-23-2021, 04:57 PM

Quote:

Originally Posted by Will335i

I bought from you off of ebay before I saw it here. Quick question for you. Can I install this without the JB4? I currently have a JB4 installed but plan to take it out and just run the MHD.

In the manual it explains how to install without a jb4 on pages 2-5.

Here is the manual

https://m.imgur.com/a/FSnWr

taz2ko0 · 06-29-2021, 08:19 AM

Bump

taz2ko0 · 07-06-2021, 11:50 AM

Bump

Vig03 · 07-11-2021, 11:37 AM

I'll take one, how much shipped to 75013? Thanks

taz2ko0 · 07-11-2021, 11:41 AM

Quote:

Originally Posted by Vig03

I'll take one, how much shipped to 75013? Thanks

Quote:

Originally Posted by Vig03

I'll take one, how much shipped to 75013? Thanks

79 shipped usps or 84 shipped insured priority mail. PayPal account is taz2ko0@yahoo.com

05-17-2021, 12:22 PM	#376
Antetokounmpo Brigadier General 1560 Rep 3,475 Posts Drives: E90 6MT FBO; '18 F150 Platinum Join Date: Jul 2013 Location: WI iTrader: (3) Garage List 2018 Ford F-150 Pla ... [0.00] 2008 BMW 335xi [0.00]	Is there a TLDR to get the car to readiness once installed? Don't really feel like reading through dozens of posts. Would be nice to link to the OP too if there is one. __________________ 2008 335xi 6MT \| VRSF Catless DP \| VRSF 7" FMIC \| VRSF CP \| TIAL BOV \| DCI \| MHD 2+ BC Racing BR \| Stoptech 600 \| Firehawk Indy 500 255 Square \| Atric Altimax 225 Sq. 2018 F-150 Platinum 701A \| FX4 \| 3.5 EcoBeast
	Appreciate 0 Quote

05-20-2021, 07:23 PM	#380
iDriveSlo Captain 41 Rep 689 Posts Drives: 335i Coupe M-Sport Lemans blue Join Date: Sep 2012 Location: United States iTrader: (1) Garage List 2009 335i M-Sport [0.00]	PM'd __________________ 2009 E92 M-Sport 6AT PTF Pro Tune Vargas Stage 2
	Appreciate 0 Quote

05-26-2021, 12:07 PM	#384
BrazjhanN54 Registered 0 Rep 3 Posts Drives: E90 335i Join Date: Mar 2021 Location: Los Angeles iTrader: (0)	When I want to remove it, can I just pull the entire unit out of the JB4 and I’ll be fine ? Or do I need to replace the jb4 wires that were there already
	Appreciate 0 Quote

06-01-2021, 08:36 PM	#386
APATHTC New Member 0 Rep 11 Posts Drives: 2014 BMW 335i xDrive Join Date: Aug 2019 Location: Albuquerque iTrader: (0)	The manual posted references three wires - 19,20 & 23. Unfortunately, my wiring harness for my 2008 335i looks absolutely nothing like what is pictured. Pin positions 19, 20 and 23 on my connector are empty. I have searched all over the internet including this forum for some help and have come up empty. I do not have a JB4 and I still have my O2 sensors installed. Can someone please tell me what exactly pins 19, 20 and 23 are referencing?
	Appreciate 0 Quote

06-08-2021, 01:08 PM	#388
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

06-14-2021, 04:49 PM	#389
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	bumps __________________ Bigger is always better! M4
	Appreciate 0 Quote

06-21-2021, 10:59 AM	#390
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Happy Father Day Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

06-23-2021, 02:10 PM	#391
Will335i The Engineer 27 Rep 331 Posts Drives: AW 07' 335i Join Date: Jul 2010 Location: St. Louis MO iTrader: (2) Garage List 2007 335i e92 [1.00]	I bought from you off of ebay before I saw it here. Quick question for you. Can I install this without the JB4? I currently have a JB4 installed but plan to take it out and just run the MHD.
	Appreciate 0 Quote

06-29-2021, 08:19 AM	#393
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

07-06-2021, 11:50 AM	#394
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

07-11-2021, 11:37 AM	#395
Vig03 Registered 0 Rep 3 Posts Drives: Cayenne CTTS,e60 535xi,e39M5 Join Date: Jul 2012 Location: MO iTrader: (0)	I'll take one, how much shipped to 75013? Thanks
	Appreciate 0 Quote