[byoung8]

Originally Posted by supahdave

Buy a bottle of Optimum No-Rinse and wash yourself. Drivethru washes are the worst for your car.

I'll have to go to the auto store and look for something like this. Thanks

Originally Posted by cbad335

Luckily you have TiAg. As long as it's kept waxed/coated, you can probably run it through an unattended gas station wash without seeing too much paint damage. I loved that about my TiAg E90. Not so lucky now with black

I do like the TiAg, but since I drove it down here, I did not wash it before I left and now it's been over 2 weeks with the same grime. The rain the other day did help a little but I'll probably find a place today.

[supahdave]

You wont be able to find ONR locally. You would have to order it from Detailers domain, detailed image, or autogeek. I no longer live in my condo, so i can sell you what i have left (should be almost full bottle).

[onnex]

anyone interested in a set of slicks? They're 275/35/18 Conti's w/ one heat cycle on them (I've been told from the previous owner– I just took the rims)

I'm asking $200 OBO– I need these things gone QUICK. Just moved into a new place with no room for them, so they're in my car right now. Make a reasonable offer and they're yours!

[deluxe 247]

Originally Posted by JasonDCarton

Hey everyone, anyone familiar with wrapping the interior trim pieces on their e90? I'm hoping to change the dated wood look to carbon fiber. I've been looking up some DIY but still not extremely confident since I have never wrapped anything before. Anyone know of some places around SD that do it or anyone here on the forums that do it themselves. Thanks guys, I'm located in Poway, SD

Defiantly give a try yourself, by some cheap wrap and practice on your trim pieces. You can't really mess up, just waste the wrap.

[deluxe 247]

Originally Posted by JasonDCarton

Where would you suggest purchasing the vinyl from?

if you want to find some cheap vinyl for practice check the for sale section i believe I saw some for sale recently.

[Infamous]

Originally Posted by onnex

anyone interested in a set of slicks? They're 275/35/18 Conti's w/ one heat cycle on them (I've been told from the previous owner– I just took the rims)

I'm asking $200 OBO– I need these things gone QUICK. Just moved into a new place with no room for them, so they're in my car right now. Make a reasonable offer and they're yours!

Damn bro, i need street tires in that size, slicks would be overkill

Are they drag radials or what

[supahdave]

Originally Posted by JasonDCarton

Hey everyone, anyone familiar with wrapping the interior trim pieces on their e90? I'm hoping to change the dated wood look to carbon fiber. I've been looking up some DIY but still not extremely confident since I have never wrapped anything before. Anyone know of some places around SD that do it or anyone here on the forums that do it themselves. Thanks guys, I'm located in Poway, SD

I tried myself with vinyl i bought off ebay. Ended up paying someone to do it. I went with garageworks via a referal from marie at modmy3.

Scroll back a page to see pics.

[supahdave]

I went with 3m scotchbrite 1080 titanium cf. paid 160 all together

[Zubz]

I did it myself. Got it from http://autovinylsolutions.com/. Get the 3m scotchbrite. Hexis sucks. Just takes patience. You don't need any tools to put it on either. The 3M goes on and stretches really well. Think it cost me about 80 in materials.

[byoung8]

I would like to do mine too, but I have iDrive and can't figure out how to remove the center console trim. My buddy has done it on his non iDrive and it looked a lot better and just took awhile on the inner curvy parts. Sounds like everything else is pretty straight forward.

Let me know how it goes and what type/color you end up buying. If there's plenty extras, I may buy the rest off of you.

[supahdave]

Pulling the trim isnt hard. Its all held in by clips. I do recommend picking up a trim puller kit from harbor freight for 6$ or so

[Zubz]

Originally Posted by byoung8

I would like to do mine too, but I have iDrive and can't figure out how to remove the center console trim. My buddy has done it on his non iDrive and it looked a lot better and just took awhile on the inner curvy parts. Sounds like everything else is pretty straight forward.

Let me know how it goes and what type/color you end up buying. If there's plenty extras, I may buy the rest off of you.

iDrive controller is easy to pop out. Put your shifter in Neutral and give it a good tug straight up. It'll come off. Center console will then come off. I think you have 3 connectors for idrive that clip off. There are squeeze tabs to pull the idrive controller off.

[byoung8]

Originally Posted by zubin75

iDrive controller is easy to pop out. Put your shifter in Neutral and give it a good tug straight up. It'll come off. Center console will then come off. I think you have 3 connectors for idrive that clip off. There are squeeze tabs to pull the idrive controller off.

Does the knob lift up with the console or do you need to remove the knob first and then put into neutral and remove the entire center console?

[Zubz]

Originally Posted by byoung8

Does the knob lift up with the console or do you need to remove the knob first and then put into neutral and remove the entire center console?

No, you need to take knob off first by putting it into neutral. The leather comes up with the console and the shaft of the shifter stays in place.

[Zubz]

Originally Posted by zubin75

No, you need to take knob off first by putting it into neutral. The leather comes up with the console and the shaft of the shifter stays in place.

Oh, and I'm talking about an automatic. Not sure about manual.

[byoung8]

I'll check it out. I'm auto and I'm taking about the iDrive knob

[supahdave]

Originally Posted by byoung8

I'll check it out. I'm auto and I'm taking about the iDrive knob

The idrive comes out thru the bottom.

[deluxe 247]

Had my car about a month and just purchased an ams intercooler, er charge pipe with hks bov, bms meth kit, jb4, dci, vrsf downpipes, and ar oil catch can. Boy is it going to be fun installing all this in one go

[335ikiid]

Originally Posted by deluxe 247

Had my car about a month and just purchased an ams intercooler, er charge pipe with hks bov, bms meth kit, jb4, dci, vrsf downpipes, and ar oil catch can. Boy is it going to be fun installing all this in one go

that a kid majd.

[deluxe 247]

Originally Posted by 335ikiid

that a kid majd.

and I got that gas station in carlsbad that sells e85 right across the street

[335ikiid]

Originally Posted by deluxe 247

and I got that gas station in carlsbad that sells e85 right across the street

really where at?

[deluxe 247]

Originally Posted by 335ikiid

really where at?

The Shell station in Bressi Ranch on palomar right before melrose if you're going east.