Do you stance?

thirdlobe · 09-26-2017, 12:03 PM

Quote:

Originally Posted by Digitalize

I did wonder since the specs were identical. Had mine a little while now, just swapped to a production set! Still haven't seen another E9x with a set on even though you guys have had them for about a month on full release.

Because of the stretch the clearance issues are the actual rim itself, so tyre size makes no difference.

Ahh, its the rim, I was hoping it was the tire. I know I need to run the camber but lets hope its not terrible.

What air setup are you running? I have the AirLift Performance Series for the car.

Digitalize · 09-26-2017, 12:06 PM

Quote:

Originally Posted by thirdlobe

Ahh, its the rim, I was hoping it was the tire. I know I need to run the camber but lets hope its not terrible.

What air setup are you running? I have the AirLift Performance Series for the car.

I'm running full AirLift Performance with 3P, and have the 3H sensors to fit.

The problem with adding camber is that it already touches the inside, with the extra spacing an LCI adds you might be okay, I've got mine at the minimum possible camber on the rear.

Front's you'll need a spacer to clear the bag/strut. I've got a 13mm spacer as I believe it's about the thinnest hubcentric you can run. With about -1.5 at ride height the rim tucks nicely, and with a 225 you'll probably clear the bumper a bit better than mine, I need to modify my mounting point when I do the LCI conversion.

thirdlobe · 09-26-2017, 12:10 PM

Appreciate the info, what sucks I have not bought a spacer for the front and bought TI wheel bolts so... UGH LOL. I found a 10mm spacer in the front with a hubcentric ring so lets see how that works.

Digitalize · 09-26-2017, 12:25 PM

Quote:

Originally Posted by thirdlobe

Appreciate the info, what sucks I have not bought a spacer for the front and bought TI wheel bolts so... UGH LOL. I found a 10mm spacer in the front with a hubcentric ring so lets see how that works.

Depending on how it's made you might be okay or you might find your hub is too deep for that 10mm spacer, think I measured it as 11mm deep but some spacers manage to squeeze a little more out.

pkbute · 10-25-2017, 01:49 PM

M3R1 · 10-27-2017, 09:35 PM

Quote:

Originally Posted by pkbute

This could be the nicest non ///M E92 I've ever seen!

xhoul335i · 10-27-2017, 11:40 PM

needs more low.

pkbute · 11-06-2017, 11:05 AM

pkbute · 11-06-2017, 11:08 AM

Quote:

Originally Posted by M3R1

This could be the nicest non ///M E92 I've ever seen!

Thanks!

Digitalize · 11-07-2017, 07:29 AM

Want to look in to getting the rear fitment tighter, need to do arch work though.

atmosphericM · 11-07-2017, 12:16 PM

^ Clean.

thirdlobe · 02-09-2018, 11:19 AM

Thanks for all the help from all those I bothered. LOL

Should have some more photos shortly.

Digitalize · 02-09-2018, 12:31 PM

Quote:

Originally Posted by thirdlobe

Thanks for all the help from all those I bothered. LOL

Should have some more photos shortly.

Oooh wheel friend!

Jealous of LCI Xenons!

How's the fitment on the back being an LCI?

Drifter2090 · 02-12-2018, 02:59 PM

Quote:

Originally Posted by Digitalize

Want to look in to getting the rear fitment tighter, need to do arch work though.

Love the wagon! Update us when you get the rear tighter!

ccbl · 02-12-2018, 03:01 PM

old fitment

Work VSXX by Steven, on Flickr

thirdlobe · 02-14-2018, 09:20 AM

Quote:

Originally Posted by Digitalize

Oooh wheel friend!

Jealous of LCI Xenons!

How's the fitment on the back being an LCI?

The backs fit perfect but I dont think there is any room to go wider. I guess I will find out

Digitalize · 02-15-2018, 07:42 AM

Quote:

Originally Posted by thirdlobe

The backs fit perfect but I dont think there is any room to go wider. I guess I will find out

I'm hoping to get a 15mm spacer on mine which should put them a little further out than yours but might need to camber them in a bit.

Drifter2090 · 06-01-2018, 01:54 PM

Quote:

Originally Posted by ccbl

old fitment

Work VSXX by Steven, on Flickr

That's perfect

Jaysongrey · 06-08-2018, 12:41 PM

Question, is anyone running 245/35/19 on stock height? I was wondering what the height looks like and how the handling is!

Ölheizer · 06-11-2018, 06:41 AM

Quote:

Originally Posted by Drifter2090

That's perfect

Sorry but that negative camber looks like broken axis and the rubber on the rim is too much pulled ... everything is inharmonic

GabeS · 08-02-2018, 12:42 PM

[IMG]undefined[/IMG]

GabeS · 08-15-2018, 04:51 PM

finally some pro pics.

09-26-2017, 12:10 PM	#4029
thirdlobe Enlisted Member 8 Rep 42 Posts Drives: E46 M3 Imola Red Join Date: May 2012 Location: South FLA iTrader: (0)	Appreciate the info, what sucks I have not bought a spacer for the front and bought TI wheel bolts so... UGH LOL. I found a 10mm spacer in the front with a hubcentric ring so lets see how that works.
	Appreciate 0 Quote

10-25-2017, 01:49 PM	#4031
pkbute Enlisted Member 6 Rep 32 Posts Drives: e92 Join Date: Feb 2013 Location: hk iTrader: (0)
	Appreciate 0 Quote

10-27-2017, 11:40 PM	#4033
xhoul335i Private 24 Rep 83 Posts Drives: 11' e90 335i Join Date: Apr 2017 Location: Phoenix, AZ iTrader: (0)	needs more low. Attached Images
	Appreciate 1 Senpai500.50 Quote

11-06-2017, 11:05 AM	#4034
pkbute Enlisted Member 6 Rep 32 Posts Drives: e92 Join Date: Feb 2013 Location: hk iTrader: (0)
	Appreciate 0 Quote

11-07-2017, 07:29 AM	#4036
Digitalize Photographer 407 Rep 2,635 Posts Drives: 320D Join Date: Jun 2013 Location: UK iTrader: (0)	Want to look in to getting the rear fitment tighter, need to do arch work though.
	Appreciate 1 Drifter2090924.00 Quote

11-07-2017, 12:16 PM	#4037
atmosphericM Basic Bimmer 523 Rep 930 Posts Drives: E92 328i 6MT ///M Join Date: Sep 2017 Location: B'ham iTrader: (1) Garage List 2013 BMW 328i Coupé ... [10.00]	^ Clean.
	Appreciate 1 Digitalize407.00 Quote

02-09-2018, 11:19 AM	#4038
thirdlobe Enlisted Member 8 Rep 42 Posts Drives: E46 M3 Imola Red Join Date: May 2012 Location: South FLA iTrader: (0)	Thanks for all the help from all those I bothered. LOL Should have some more photos shortly.
	Appreciate 3 !LEFTCOAST!187.00 TGSN_30.00 Drifter2090924.00 Quote

02-12-2018, 03:01 PM	#4041
ccbl Lieutenant 595 Rep 411 Posts Drives: AW E93 335i/Jerez E90 M3 6SP Join Date: Jun 2013 Location: Ottawa iTrader: (0) Garage List 2010 BMW M3 [0.00]	old fitment Work VSXX by Steven, on Flickr __________________ Instagram @luongspec
	Appreciate 2 Drifter2090924.00 TGSN_30.00 Quote

06-08-2018, 12:41 PM	#4045
Jaysongrey Registered 0 Rep 1 Posts Drives: 2012 328i Join Date: Jun 2018 Location: Jacksonville, FL iTrader: (0)	Question, is anyone running 245/35/19 on stock height? I was wondering what the height looks like and how the handling is!
	Appreciate 0 Quote

08-02-2018, 12:42 PM	#4047
GabeS Crazy! 1190 Rep 1,441 Posts Drives: E93 M3/Mk4 Supra/X6M Join Date: Feb 2013 Location: Las Vegas iTrader: (1)	[IMG]undefined[/IMG] Attached Images __________________ First "real" widebody M3 ever thread.[url]http://www.m3post.com/forums/showthread.php?p=17461963
	Appreciate 2 Drifter2090924.00 UncleShrek89.00 Quote

08-15-2018, 04:51 PM	#4048
GabeS Crazy! 1190 Rep 1,441 Posts Drives: E93 M3/Mk4 Supra/X6M Join Date: Feb 2013 Location: Las Vegas iTrader: (1)	finally some pro pics. Attached Images __________________ First "real" widebody M3 ever thread.[url]http://www.m3post.com/forums/showthread.php?p=17461963
	Appreciate 3 UncleShrek89.00 Drifter2090924.00 Silnismo227.50 Quote