E92 coupe Offset information - Everyone with aftermarket rims plz chime in !!!!!!!!!!

remmib · 08-26-2010, 01:28 PM

Quote:

Originally Posted by mikegronholz

how about some bmw perf 313s ... 19x9 in the rear +39 ... how would a big fat 275 look and fit with that wheel ?

275 is fat on a 9" wide wheel, and especially the Michelin tires. I've seen Michelin 255/30/19 on a 19x9.5 and that was like a normal 265/30/19 tire.

acnhdernegw · 08-28-2010, 09:00 PM

i have e92 and i got some wheels with 19x8 ET37 for the front with Hankook 235/35/19
Am i ok to put 12mm spacer in the front ??
i used to have vmr v710 19x8.5 ET35 +5mm spacer lower on kw and i am kinda rubbing the front fender when taking sharp turn.
or i should just get smaller spacer ?

hun77777 · 08-28-2010, 09:32 PM

Quote:

Originally Posted by acnhdernegw

i have e92 and i got some wheels with 19x8 ET37 for the front with Hankook 235/35/19
Am i ok to put 12mm spacer in the front ??
i used to have vmr v710 19x8.5 ET33 +5mm spacer lower on kw and i am kinda rubbing the front fender when taking sharp turn.
or i should just get smaller spacer ?

i'd much rather get 5mm or even just leave it than dealing with potential rubbing issue. but that's just me. if you want aggressive look, put all that effort on rears and that should do the trick. front is bit more complicated because you have bigger brake caliper and you gotta steer etc etc...

acnhdernegw · 08-28-2010, 10:29 PM

Quote:

Originally Posted by hun77777

i'd much rather get 5mm or even just leave it than dealing with potential rubbing issue. but that's just me. if you want aggressive look, put all that effort on rears and that should do the trick. front is bit more complicated because you have bigger brake caliper and you gotta steer etc etc...

Thanks
this is how front looks like now with 5mm spacer

rear still have about 1.5 finger from tires to fender
so i can put 10 mm spacer maybe ?

Thanks for the help

Peter@VMRWheels · 08-28-2010, 10:45 PM

Quote:

Originally Posted by acnhdernegw

i have e92 and i got some wheels with 19x8 ET37 for the front with Hankook 235/35/19
Am i ok to put 12mm spacer in the front ??
i used to have vmr v710 19x8.5 ET33 +5mm spacer lower on kw and i am kinda rubbing the front fender when taking sharp turn.
or i should just get smaller spacer ?

Hmmm, 19x8.5 ET33 isn't a spec we make. Is it 19x9.5 ET33 you are driving on, or 19x8.5 ET35? Pushing out either would definitely cause rubbing.

acnhdernegw · 08-28-2010, 10:59 PM

Quote:

Originally Posted by Peter@VMRWheels

Hmmm, 19x8.5 ET33 isn't a spec we make. Is it 19x9.5 ET33 you are driving on, or 19x8.5 ET35? Pushing out either would definitely cause rubbing.

Thanks for the correction, Peter
I guess it's 19x8.5 et35 front 19x9.5 et33 rear for the VMR wheels for e92?

Peter@VMRWheels · 08-29-2010, 12:26 AM

Correct! That would be your ideal fitment. You can push further out but you'll get into fender rolling territory. Good luck!

Quote:

Originally Posted by acnhdernegw

Thanks for the correction, Peter
I guess it's 19x8.5 et35 front 19x9.5 et33 rear for the VMR wheels for e92?

Seed · 09-03-2010, 08:39 PM

What about

F 19x9.5 ET33 with 245/35/19 General Ex Tire
R 19x10 ET38 with 275/30/19 General Ex Tire

Peter@VMRWheels · 09-03-2010, 08:42 PM

^^ Workable with slight fender rolling in the rear. I had this exact setup on my E92 with no problems.

Saigon · 09-03-2010, 08:49 PM

Quote:

Originally Posted by acnhdernegw

Thanks for the correction, Peter
I guess it's 19x8.5 et35 front 19x9.5 et33 rear for the VMR wheels for e92?

5 mm front spacer max = +30, 33-8mm spacer= +25 offset in the rear should be fine with a 265 tire as long as you're not slammed.

Peter@VMRWheels · 09-03-2010, 08:55 PM

^^ Thanks Saigon. =D

forza1976 · 09-03-2010, 10:14 PM

245/40/18 all around
ET37 up front
ET25 rear

V1 coils with no finder mods and no rubbing.

Qchau1987 · 09-14-2010, 11:35 PM

Hi all, I'm just wondering if this will fit on my e92 328xi?
19x8.5, offset 29, 245/35/19
19x9.5, offset 23, 265/35/19 w/ fenders rolled

mikegronholz · 09-15-2010, 12:16 AM

Quote:

Originally Posted by Qchau1987

Hi all, I'm just wondering if this will fit on my e92 328xi?
19x8.5, offset 29, 245/35/19
19x9.5, offset 23, 265/35/19 w/ fenders rolled

fronts will be pretty ok ... im running the same in a Michelin 235 which is close to most 245's with no issues at all. Even a Michelin 245 would probably be ok.

rears are out there a little ways. my 10" +37 are going to sit about 5mm or so inboard than your setup. Again Michelin 265 is like most 275, but you are looking at a narrower wheel. Mine are dang close to rubbing as is ... not sure if somethnig changed for 2011 ... mine sit flush with the lip where as others sit in some.

Stock, pre 2011, you might pull it off with narrow 265's. Lowered, I don't see it happening at all.

Qchau1987 · 09-15-2010, 12:40 AM

Quote:

Originally Posted by mikegronholz

fronts will be pretty ok ... im running the same in a Michelin 235 which is close to most 245's with no issues at all. Even a Michelin 245 would probably be ok.

rears are out there a little ways. my 10" +37 are going to sit about 5mm or so inboard than your setup. Again Michelin 265 is like most 275, but you are looking at a narrower wheel. Mine are dang close to rubbing as is ... not sure if somethnig changed for 2011 ... mine sit flush with the lip where as others sit in some.

Stock, pre 2011, you might pull it off with narrow 265's. Lowered, I don't see it happening at all.

Yea, they're Michelin PS2's and I'm running on stock suspension. I just hope they don't rub in the rear after I get my fenders rolled.

mikegronholz · 09-15-2010, 12:42 AM

Quote:

Originally Posted by Qchau1987

Yea, they're Michelin PS2's and I'm running on stock suspension. I just hope they don't rub in the rear after I get my fenders rolled.

you already bought them ? if so, they are prolly gonna rub !!! they will be more square on your wheels than mine and yours sit out a hair further. Just rolling down the street will be fine, but big dips and the like are gonna eat the sidewalls up ...

Qchau1987 · 09-15-2010, 12:47 AM

Quote:

Originally Posted by mikegronholz

you already bought them ? if so, they are prolly gonna rub !!! they will be more square on your wheels than mine and yours sit out a hair further. Just rolling down the street will be fine, but big dips and the like are gonna eat the sidewalls up ...

I'll probably have to get tires that will fit...Or I have to be extra careful when I'm driving! They're actually OEM m3 wheels.

lpphreakx06 · 09-15-2010, 02:41 AM

18x9.5 +22 looks like this..

Robmaster · 09-15-2010, 03:08 AM

Quote:

Originally Posted by Qchau1987

Hi all, I'm just wondering if this will fit on my e92 328xi?
19x8.5, offset 29, 245/35/19
19x9.5, offset 23, 265/35/19 w/ fenders rolled

i have 19x9.5 offset 20, 255/30/19 with slightley rolled fenders. still rubs bad over bumps.

by the way: the rear tire size is wrong: 265/30/19 is the right one.

Qchau1987 · 09-15-2010, 06:51 AM

Quote:

Originally Posted by Robmaster

i have 19x9.5 offset 20, 255/30/19 with slightley rolled fenders. still rubs bad over bumps.

by the way: the rear tire size is wrong: 265/30/19 is the right one.

Is yours lowered? Looks like it is. I'm running on stock suspension.

Qchau1987 · 09-15-2010, 08:19 AM

Also, do I need to change my camber even w/ stock suspension and car is not lowered to make this setup work?

hun77777 · 09-23-2010, 05:59 PM

Quote:

Originally Posted by Sevak

What about

Front 19x8.5 ET30 with 235/35/19 Toyo Proxes or Falken.
Its the Breyton Race GT
My car is lowerd whit H&R springs.

u r good!

08-28-2010, 09:00 PM	#398
acnhdernegw Captain 70 Rep 863 Posts Drives: 08 AW E92 335xi Join Date: Oct 2009 Location: SoCal iTrader: (44)	i have e92 and i got some wheels with 19x8 ET37 for the front with Hankook 235/35/19 Am i ok to put 12mm spacer in the front ?? i used to have vmr v710 19x8.5 ET35 +5mm spacer lower on kw and i am kinda rubbing the front fender when taking sharp turn. or i should just get smaller spacer ? __________________ Last edited by acnhdernegw; 08-28-2010 at 10:55 PM..
	Appreciate 0 Quote

09-03-2010, 08:39 PM	#404
Seed Private First Class 4 Rep 159 Posts Drives: It's a POS Civic Join Date: Oct 2009 Location: California iTrader: (1)	What about F 19x9.5 ET33 with 245/35/19 General Ex Tire R 19x10 ET38 with 275/30/19 General Ex Tire
	Appreciate 0 Quote

09-03-2010, 08:42 PM	#405
Peter@VMRWheels BimmerPost Supporting Vendor 94 Rep 685 Posts Drives: P85D Join Date: Mar 2009 Location: Irvine, CA iTrader: (0)	^^ Workable with slight fender rolling in the rear. I had this exact setup on my E92 with no problems.
	Appreciate 0 Quote

09-03-2010, 08:55 PM	#407
Peter@VMRWheels BimmerPost Supporting Vendor 94 Rep 685 Posts Drives: P85D Join Date: Mar 2009 Location: Irvine, CA iTrader: (0)	^^ Thanks Saigon. =D
	Appreciate 0 Quote

09-03-2010, 10:14 PM	#408
forza1976 Major General 3530 Rep 6,627 Posts Drives: BMW Join Date: Aug 2007 Location: 49456 iTrader: (13) Garage List 2022 BMW M3X [9.50]	245/40/18 all around ET37 up front ET25 rear V1 coils with no finder mods and no rubbing.
	Appreciate 0 Quote

09-14-2010, 11:35 PM	#409
Qchau1987 Private 0 Rep 55 Posts Drives: E90 Join Date: Mar 2010 Location: MA iTrader: (0)	Hi all, I'm just wondering if this will fit on my e92 328xi? 19x8.5, offset 29, 245/35/19 19x9.5, offset 23, 265/35/19 w/ fenders rolled
	Appreciate 0 Quote

09-15-2010, 02:41 AM	#414
lpphreakx06 Professional Moose Racer 331 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	18x9.5 +22 looks like this.. __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 1 Quote

09-15-2010, 08:19 AM	#417
Qchau1987 Private 0 Rep 55 Posts Drives: E90 Join Date: Mar 2010 Location: MA iTrader: (0)	Also, do I need to change my camber even w/ stock suspension and car is not lowered to make this setup work?
	Appreciate 0 Quote