Software - Help yourself

bmw-extreme · 07-27-2021, 01:00 PM

looking for a working fsc tools 02.02, but I couldn't find a link. I am blind or its waiting for me somewhere. Thanks for help.

bubarak · 07-27-2021, 01:37 PM

Quote:

Originally Posted by J0K3R5

Nothing is lost, all backup my server

No Surreder ! Make private torrent with donate for acces, you deserve it !

Unspec · 07-27-2021, 04:54 PM

Quote:

Originally Posted by evominati

reupload to mega?

They'd just get their account flat out suspended if they did that.

J0K3R5 · 07-27-2021, 05:21 PM

busy uploading to onedrive at the moment

ImBlue · 07-27-2021, 09:55 PM

Thanks for this

GammaX · 08-01-2021, 08:45 AM

Quote:

Originally Posted by J0K3R5

busy uploading to onedrive at the moment

Did you manage to do that?

marinpop · 08-01-2021, 01:42 PM

Following. I need to register a new battery and figured it was finally time to install this software. Cable arrives today. Very disappointing. Hope there is a fix not too far in the future.

J0K3R5 · 08-01-2021, 01:59 PM

Quote:

Originally Posted by marinpop

Following. I need to register a new battery and figured it was finally time to install this software. Cable arrives today. Very disappointing. Hope there is a fix not too far in the future.

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

marinpop · 08-03-2021, 12:06 AM

Quote:

Originally Posted by J0K3R5

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

Thanks so much for that. You are a gentleman.

charlie_m · 08-03-2021, 10:54 AM

Quote:

Originally Posted by J0K3R5

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

Yes, thanks for this! Is there any reason to offer older ISTA standalone versions?

J0K3R5 · 08-03-2021, 11:12 AM

Quote:

Originally Posted by charlie_m

Yes, thanks for this! Is there any reason to offer older ISTA standalone versions?

Testing the water, Im expecting this thread to be watched and getting reported.
So not releasing everything at the moment, until I get a secure host.

Like a server in Ukraine

gjm120 · 08-03-2021, 02:06 PM

Quote:

Originally Posted by J0K3R5

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

Rant: There seems to be a motivation within BMW to make diy'ers suffer. They shut down TIS recently. At one time I even found access to the spring selector routine.

I guess they think people with older cars who enjoy working on them are going into the dealer for everything. End rant.

The ISTA version I have is off of Bimmergeeks site. (v 4.01.21.17412). Does it make any sense for me to get a more recent one??

GammaX · 08-03-2021, 05:41 PM

Quote:

Originally Posted by J0K3R5

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

Thanks for that!

Unspec · 08-04-2021, 12:25 AM

Quote:

Originally Posted by gjm120

Rant: There seems to be a motivation within BMW to make diy'ers suffer. They shut down TIS recently. At one time I even found access to the spring selector routine.

I guess they think people with older cars who enjoy working on them are going into the dealer for everything. End rant.

The ISTA version I have is off of Bimmergeeks site. (v 4.01.21.17412). Does it make any sense for me to get a more recent one??

BMW has always been anti-DIY. Shutting down TIS pretty much flies in the face of right to repair laws, but until they're sued or fined for it, they'll keep doing it.

Remember this shit?

BMW Will Publicly Shame Out-of-Warranty Drivers with Smart Billboards and License Plate Readers

gjm120 · 08-04-2021, 10:11 AM

Quote:

Originally Posted by Unspec

BMW has always been anti-DIY. Shutting down TIS pretty much flies in the face of right to repair laws, but until they're sued or fined for it, they'll keep doing it.

Remember this shit?

BMW Will Publicly Shame Out-of-Warranty Drivers with Smart Billboards and License Plate Readers

Holy crap. I hadn't seen that. Unbelievable. Well not really that hard to believe given the sporadic outbreaks of arrogance.

marinpop · 08-04-2021, 10:54 AM

Quote:

Originally Posted by J3R5

Testing the water, Im expecting this thread to be watched and getting reported.
So not releasing everything at the moment, until I get a secure host.

Like a server in Ukraine

I found a virus. I'm trying to PM you with details but I am too new to this site and it won't let me yet.

J0K3R5 · 08-04-2021, 12:13 PM

Quote:

Originally Posted by marinpop

I found a virus. I'm trying to PM you with details but I am too new to this site and it won't let me yet.

It will be a false positive

marinpop · 08-04-2021, 02:27 PM

Quote:

Originally Posted by J0K3R5

It will be a false positive

That's what I was hoping. McAfee found two. FYI

GenericRXMX-FZ!E44D688B04BC in file FemtoEO v.1.09.rar

JTI/Suspect.196612!506393dda507 in file setup_FSC-tools.exe

I'll be loading on a fresh windows 10 install on a machine dedicated for this so I will report back if I find any problems. For now I'll assume it's a false positive.

KaiminPuika · 08-04-2021, 02:50 PM

Hey, J0K3R5

I got into the onedrive link - Where should I look to sort this problem now? There is a detailed description I just need the link/location of file

Thanks in advance!

Quote:

Originally Posted by J0K3R5

https://mega.nz/folder/99wA2CCD#MWVv-xJ9e-5kY3nUWdwAbg

Installation instructions:
1. Go to Ediabas folder. For INPA its normaly C:\Ediabas\Bin, for ISTA+ its in Ediabas\Bin folder with ISTA+ directory.
1. If you are using STD:OBD rename existing obd32.dll to obd32.ebas.dll. Users of other cable types rename respective dll (for example STD:CAN users rename can32.dll to can32.ebas.dll).
2. Extract the downloaded file.
3. Copy included obd32.dll to Ediabas\Bin. For other cable types rename it to respective name first (for example can32.dll).
4. For ISTA+ only: copy included NodeISTAVoltageControl.dll to Ediabas\Bin folder within ISTA+ installation.
5. For ISTA+ v4.05 (and above) only:
a) replace existing IstaOperation.exe within ISTA+'s TesterGUI\Bin\Release folder by included one (from respective folder based on ISTA+ version).
b) run included AllowFakeISTAOperation.reg file (choose x86 or x64 depending on your system being 32 or 64 bit respectively).

To manually control the voltage start included NodeEdiabasVoltageControl.exe application. This application can be placed in a different folder if wanted. Voltage can be adjusted by moving sliders or switched off using check boxes. Unchecking check box has the same effect as moving slider to 0V.

UPDATE V2.0:
Version 2.0 of this tool has been released. New features:
1. It now checks the actual interface type setting in ISTA during runtime, so if you switch from Ediabas to ICOM it will stop interfering and resume operation as soon as interface type is set back to Ediabas.
2. It now supports K+DCAN cables which have an ability to detect clamp states (probably most higher quality cables). To use this feature control application should be closed. It will then read actual clamp states and update ISTA voltage states accordingly without any manual actions required. Starting control application will switch the operation to manual control. Closing it will resume automatic recognition.

UPDATE V3.0:
Version 3.0 of this tool has been released. New features:
1. Control application can now be minimized.
2. Support for ISTA+ v4.05 (and hopefully above).

System requirements: Visual Studio 2015 x86 runtime must be installed (same as required for last versions of ISTA+).

P.S. This voltage control utility is not designed to and will not influence voltages reported by ICOM.
P.P.S. This utility works without any issues with original ISTA+, standalone not necessary.

shannon1 · 08-04-2021, 06:22 PM

Quote:

Originally Posted by J0K3R5

LINK EXPIRES 4TH AUG

https://1drv.ms/f/s!ApTXN2OB77W_iZwICBxOrzXvSGuDFQ

Hi J0K3R5, due to my slow internet download speed, I've was downloading the onedrive file for the last two days, but unfortunately it expired just before I finished (I got up to just over 16GB)

.

Any chance you could put it up again?

Cheers.

J0K3R5 · 08-05-2021, 12:53 AM

Quote:

Originally Posted by shannon1

Hi J0K3R5, due to my slow internet download speed, I've was downloading the onedrive file for the last two days, but unfortunately it expired just before I finished (I got up to just over 16GB)

.

Any chance you could put it up again?

Cheers.

check ur pm

J0K3R5 · 08-05-2021, 07:10 AM

Need your help/input, if I do all this sharing again.

In the stats from mega, I could see how many shared subs and what country there was of my account.
A large amount were business accounts, I tracked a few of them down and they were selling the software.
That I was sharing for FREE.

So need some ground rules to be put in place, for example,

a temp link will be supplied
no 10 posts or under, user gets nothing

07-27-2021, 01:00 PM	#397
bmw-extreme Enlisted Member 0 Rep 43 Posts Drives: e90 Join Date: Mar 2011 Location: turkey iTrader: (0)	looking for a working fsc tools 02.02, but I couldn't find a link. I am blind or its waiting for me somewhere. Thanks for help. Last edited by bmw-extreme; 07-27-2021 at 02:39 PM..
	Appreciate 0 Quote

07-27-2021, 05:21 PM	#400
J0K3R5 Lieutenant 418 Rep 411 Posts Drives: BMW Join Date: Oct 2016 Location: In a deep hole iTrader: (0)	busy uploading to onedrive at the moment
	Appreciate 6 eastsidaz215.00 nerovega39.00 rob37uk0.00 evominati22.00 Unspec1380.50 KawBoy168.50 Quote

07-27-2021, 09:55 PM	#401
ImBlue Private 32 Rep 85 Posts Drives: 2016 340ix MPPSK\| 2015 R60 JCW Join Date: Jun 2019 Location: Toronto iTrader: (0) Garage List 2016 BMW 340i xDrive [0.00]	Thanks for this
	Appreciate 0 Quote

08-01-2021, 01:42 PM	#403
marinpop New Member 0 Rep 9 Posts Drives: BMW 335i, Porsche TurboCayenne Join Date: Aug 2021 Location: Northern California iTrader: (0)	Following. I need to register a new battery and figured it was finally time to install this software. Cable arrives today. Very disappointing. Hope there is a fix not too far in the future.
	Appreciate 0 Quote

08-05-2021, 07:10 AM	#418
J0K3R5 Lieutenant 418 Rep 411 Posts Drives: BMW Join Date: Oct 2016 Location: In a deep hole iTrader: (0)	Need your help/input, if I do all this sharing again. In the stats from mega, I could see how many shared subs and what country there was of my account. A large amount were business accounts, I tracked a few of them down and they were selling the software. That I was sharing for FREE. So need some ground rules to be put in place, for example, a temp link will be supplied no 10 posts or under, user gets nothing
	Appreciate 4 shannon1682.50 KawBoy168.50 F31B48291.50 dar2008384.50 Quote