[shawnsheridan]

Originally Posted by bbstoke

May have missed a post but why code the key fobs? To open the windows whilst opening your car just keep finger on open... Same goes for locking.. All windows open, shut door,keep finger on lock and all windows go up..Simples

Having to keep your finger on the window up or down button as the door is opened sort of defeats the entire purpose of having express up and down windows doesn't it? It makes a lot more sense to change the interrupt coding and preserve the express up and down functionality.

[jphughan]

Originally Posted by shawnsheridan

Having to keep your finger on the window up or down button as the door is opened sort of defeats the entire purpose of having express up and down windows doesn't it? It makes a lot more sense to change the interrupt coding and preserve the express up and down functionality.

True -- but least on the E92 and E93 I can see why they disabled one-touch while the door is open. I can just see some idiot pushing the switch to start rolling their window down or up and slamming the door shut while the window is still moving. Not really the best idea on FRAMELESS WINDOWS!

When people ask me to code this for them I always warn them about that, especially the possibility that a passenger might do that before the owner has a chance to stop them. Most E92/93 owners end up deciding they'd rather not have that risk. I don't see a risk to doing it on an E90 though.

[edwinm3]

Wow! I just coded my windows to roll up with key fob...Thanks guys, this is awesome

[bbstoke]

Originally Posted by 1QuikWS6

Not coding the fobs - but particular modules in the car to get desired results.

In U.S. we are not able to Auto Close the windows or the sunroof for liability reasons (someone must have closed their kid's or dog's head in the window at some point)

From factory only Auto Down/Open is enabled with fob - to enable full function it's a simple matter of changing a couple lines of code...

I hear you fella,this coding lark is a bit over my head though

[edwinm3]

Which one of these options is the one for adjusting angel eyes brightness? TIA

PWM_AL
wert_01
PWM_BFD
wert_06
PWM_BFD_ERSETZT_RL_BL_1
wert_02
PWM_BL_M_1
wert_01
PWM_BLK_H
wert_04
PWM_BLK_V
wert_02
PWM_BLK_V_FKT_SIDEMARKER
wert_04
PWM_FL
wert_02
PWM_FL_BEI_BIXENON
wert_02
wert_03
PWM_FL_FKT_DRL
wert_01
PWM_FL_NSW_FKT_ABBLIEGELI
wert_01
PWM_IB
wert_01
PWM_KZL
wert_04
PWM_NSL
wert_02
PWM_NSL_FKT_SL
wert_01
PWM_NSW
wert_03
PWM_RFS
wert_01
PWM_RL_BL_1_FKT_BL
wert_01
wert_02
PWM_RL_BL_1_FKT_SL
wert_01
PWM_RL_BL_2_FKT_BL
wert_01
PWM_RL_BL_2_FKT_SL
wert_01
PWM_RL_BL_FKT_BL
wert_05
PWM_RL_BL_FKT_SL
wert_01
PWM_SL_V
wert_03
PWM_SL_V_BEI_AKTIVEN_AL
wert_03
PWM_SL_V_BEI_AKTIVEN_FL
wert_03
PWM_VFB
wert_01

[Cloud1515]

After some problems iam getting used to code with nsc expert again. Only problem is that i dont know the values for the options i want to code
I tried that codinghelp from the 5series forum but most of them dont work.

Car was built 01/2008

-i want to use the inner lights for flash but how? atm only the xenons do it

-coming home light without xenon but fog lights instead

-welcome light with additional fog lights and for a longer time

-flashing 3rd brake light when fully breaking

-fold mirrors with key

-parking light on till lock

-no a/c on auto

-wipers wipe to end after ignition off

Is it possible to activate voice command via coding?

[ramez75]

Anyone have like step by step or some sort of instructions on how to code Front & rear PDC. I know I have to add the VO$508 but to what module and then after I add the VO what modules or is it only adding the VO.....

Thanks in advance

[jphughan]

I thought front and rear PDC each had their separate VO codes for countries (like ours) where some cars are only available with rear? In any case, PDC is an entirely separate module unto itself, so I think you'd have to run the Process Car command while you have a blank MAN file to get it to recognize the new module. That WILL wipe out any custom coding you've done, so hopefully you've been keeping a list of the changes you've made so you can reimplement them quickly.

Also, make sure to write the new VO to both CAS and FRM/NFRM.

[tlp]

Originally Posted by jphughan

I thought front and rear PDC each had their separate VO codes for countries (like ours) where some cars are only available with rear? In any case, PDC is an entirely separate module unto itself, so I think you'd have to run the Process Car command while you have a blank MAN file to get it to recognize the new module. That WILL wipe out any custom coding you've done, so hopefully you've been keeping a list of the changes you've made so you can reimplement them quickly.

Also, make sure to write the new VO to both CAS and FRM/NFRM.

507 = Rear only
508 = Full [Front & Rear]

If you're moving from Rear to Full then you would remove 507 & add 508. You only need to code the defaults to CIC/CCC and PDC if transitioning from 507 to 508.

[bbstoke]

Originally Posted by shawnsheridan

Having to keep your finger on the window up or down button as the door is opened sort of defeats the entire purpose of having express up and down windows doesn't it? It makes a lot more sense to change the interrupt coding and preserve the express up and down functionality.

I didn't mean the up or down button,I meant using the key fob,lock and unlock. that operates all the windows express up and down without coding if you hold it on. Sorry for any mix ups

[fluidkaos]

Originally Posted by hsleiman

Anybody know why the google docs spreadsheet is missing 90% of the coding options? Anyone have a copy backed up?

It's not missing any of the options. Someone enabled a filter on the 'Module' column that has hidden a lot of the rows. If you disable this filter, everything will show back up again.

[Kc335it]

Very useful, thanks!

[jzxi]

Thanks to everyone who contributed, I was able to get all the software up and running!

cheers
jz

[Stanleywan1211]

Sorry i am new to here so what does it mean or do by coding?

[jphughan]

Originally Posted by Stanleywan1211

Sorry i am new to here so what does it mean or do by coding?

Read Post #1, including watching the video and checking out the spreadsheet.

[shawnsheridan]

Originally Posted by Stanleywan1211

Sorry i am new to here so what does it mean or do by coding?

The short answer is you are changing predefined parameters of a vehicle's electronic control modules to alter its behavior, as in to add, change, or remove features or functionality. Generally speaking, the logic exists already within the ECU, and it is just a matter of enabling or disabling a function, or changing a function's parameter, like frequency, duration, etc.

[Stanleywan1211]

Originally Posted by shawnsheridan

The short answer is you are changing predefined parameters of a vehicle's electronic control modules to alter its behavior, as in to add, change, or remove features or functionality. Generally speaking, the logic exists already within the ECU, and it is just a matter of enabling or disabling a function, or changing a function's parameter, like frequency, duration, etc.

oh ! thanks mesin with the code of the ECU huh looks like not a beginner should do haha i might mess up the original ones but it does sounds i will try that one day how many codes are there now days

[shawnsheridan]

Originally Posted by Stanleywan1211

oh ! thanks mesin with the code of the ECU huh looks like not a beginner should do haha i might mess up the original ones but it does sounds i will try that one day how many codes are there now days

Actual codes? On a single ECU like for the Head Unit, it's hundreds, but how many will be of actual interest is probably no more than a handful. Some ECU's while codeable, you will likely have no interest in at all.

[bommer]

First, thanks for the how to! I never would have been able to make heads or tails of NCSExpert without it. I have a 2006 325Xi wagon.

I have successfully changed/added the common stuff... digital speedo, nanny options disabled, etc. Useful stuff turned on.
There was that moment of panic when most of my cluster was inop. Back to E90post... ah! I need new datum files...Overnight torrent and a few minutes of moving files around before having a conversation with my car and I have a fully functional cluster again. For future reference, the cruise control doesn't work when the cluster is... having issues.

I am stuck with express open not working on my front windows only.
express close works as it should and the rear windows work as they should. I horked something but will be dipped if I can figure it out.

Can someone point me at the correct module and what I need to change to fix it?

[pepsih]

2.5 months after i bought the car i start to code it ;D
LOVE IT.
So far i deleted the corner light, Digital speedo, and keyfob folding mirror.
next is LCI tailight conversion. d
THANKS A LOT FOR THE OP FOR THE DIY

[Bricks]

can someone help me with coding my e90 lci from halogen to xenon
how do i add the $522 value ?

[bommer]

Originally Posted by bommer

bla...bla..bla...

I am stuck with express open not working on my front windows only.
express close works as it should and the rear windows work as they should. I horked something but will be dipped if I can figure it out.

Can someone point me at the correct module and what I need to change to fix it?

I recoded my FRM module with with a blank .man file and everything is working again.