[reolonaapp]

Ill need to replace my ABS Pump. After that I know Ill need to take the car to the dealer to make the car to recognize the new pump. Do you guys think, I can do that myself using these instructions?

[bula]

Originally Posted by reolonaapp

Ill need to replace my ABS Pump. After that I know Ill need to take the car to the dealer to make the car to recognize the new pump. Do you guys think, I can do that myself using these instructions?

If pump was the problem then just replace pump and keep the old electronics and no re-programing will be needed.

[orion7144]

So I have successfully added the VO to my car for the alarms system but I have one question. I reset all the modules to defaults and all the alarm functions work. I am going to change some of the other options like the digital speed and windows up with remote. I noticed on the spreadsheet that some options I want to change are labeled as different modules however everything I search for in the trc file is there. Do I just change it there and the write to the specific module or do I have to download each one then do it?

Thanks

[jphughan]

Originally Posted by orion7144

So I have successfully added the VO to my car for the alarms system but I have one question. I reset all the modules to defaults and all the alarm functions work. I am going to change some of the other options like the digital speed and windows up with remote. I noticed on the spreadsheet that some options I want to change are labeled as different modules however everything I search for in the trc file is there. Do I just change it there and the write to the specific module or do I have to download each one then do it?

Thanks

Do them one module at a time. Do NOT use the full car trace and try to code everything back at once.

[orion7144]

Originally Posted by jphughan

Do them one module at a time. Do NOT use the full car trace and try to code everything back at once.

Thanks

[mrjoe]

I would not mind at all for someone to code my car. With what I heard about coding i would have paid up to $320 for that kind of service....easy money. HOWEVER my inability to find anyone who could code it for me (or lacking the knowledge to translate what i wanted from my car to do the dealer.) I turned to find out how to code myself and find out what i need to do. I put in the work and bought/ downloaded/ taught myself to code. We should have the info out there if people want to put in the effort and pay the money for the hardware required. If they don't then someone closer to them would have access to someone who can do it for them because the information is free and more locally available.

[M.Etreby]

Hi guys, i have been away from coding for about a year now, and seem to be missing lots of stuff. so primarilty to catch up, what are the latest versions of NCSexpert, and Daten files for e90s, where can i find them?
thx

[franzzz]

Hi
I try to code my 12/2008 E71 X6 in order to activate this feature :
SPIEGEL_KOMFORT_EINKLAPP

But is not present in NFRM module

any idea ?

[jphughan]

Originally Posted by franzzz

Hi
I try to code my 12/2008 E71 X6 in order to activate this feature :
SPIEGEL_KOMFORT_EINKLAPP

But is not present in NFRM module

any idea ?

Look for ASP_KOMFORT_EINKLAPP; that's the newer name for that function. If you don't have that either, maybe your car doesn't support that function at all? Also fyi, for this feature to work you also need to enable KOMFORTSCHLIESSUNG_FB in the CAS module.

[franzzz]

Originally Posted by jphughan

Look for ASP_KOMFORT_EINKLAPP; that's the newer name for that function. If you don't have that either, maybe your car doesn't support that function at all? Also fyi, for this feature to work you also need to enable KOMFORTSCHLIESSUNG_FB in the CAS module.

I try...
tnx

No problem on my 335i (FRM) but in the NFRM modul of X6 35d the entries are differents.

[Yvette]

hey guys
i wanted to remove idrive *ccc disclaimer but i do not see modules either cic or ccc to code in
any ideas?

[trickcruiser]

So I read the first few pages and have to applaud the OP on the information!
Perhaps a dumb question and is probably answered in the 190+ pages but do the same basics apply to the 08 135i w/Idrive?
Thank you,

[rich123321]

Originally Posted by e90sexion

hey guys
i wanted to remove idrive *ccc disclaimer but i do not see modules either cic or ccc to code in
any ideas?

I think it may also be called cappl or something along the lines of that

[brad bedell]

Originally Posted by rich123321

I think it may also be called cappl or something along the lines of that

+1 it's cappl

do a search for legal, you'll find it.

[brad bedell]

Found the code for auto fog lights.

SL_FKT_MIT_NSW

Set it to aktiv in the frm. (mine was NFRM with a FRM3)

[smiley32]

1. im trying to connect to a 3 series e90 LCI 2009 as iv had issues with lack of power im off on holiday with the car Monday and wanted to find out what was wrong before i go i have read every post i can find over the last week but cant find the solution

2. i have tried pin 7-8 linked unlinked

3. i have pins 1, 4, 5, 6, 9, 14 and 16 in the obd socket

4. I have tried xp SP3 32 bit. Firewall disabled, no anti-virus. No other software is installed. (I've had the same problem using Win 7 and Vista).

5. C:\Ediabas\bin is in the path.

6. Installed the USB cable and set the COM port to 1. Latency is set to 1ms. There is no option to use FIFO buffer.

7. Ediabas.ini has STD:OBD as interface. It is also set so loadwinxp = 1

8. OBD.INI is in C:\ediabas\bin and \system32. COM port is set to 1 but i have tried every other com port too.

9. When loading INPA, I get black battery and ignition when plugged in and starting car.

10. I can not read the ECU. or read errors. just get ifh-009

11. When trying to read any other module, I get the IFH 0009 No Response From Control Unit.

12. i have tried 3 different leads all supposedly kline and dcan compatable

13. i have tried 3 different laptops

14. i have tried to run dcantools but i get interface not found when trying to set dcan

15. i have installed the software from 3 different CD that came with the leads and 3 downloaded sources reported working

http://www.ebay.co.uk/itm/2510295900...84.m1497.l2649

[carlosalbertogui]

can someone help coding vin to a TCU Telematic control unit
or coding TCU to disable SOS call System failure error on startup i dont use it anyway.
i use bluetooth phone and its on the same modul i think

any help will be gold

trying not to waste 350€ on new TCU

best regards

[BostonBeemah]

@Smiley32 Do you have JB or any other tune installed on the car? It wont connect to the ECU unless your on map 0

[smiley32]

map 0? I do not understand what you mean...

The car does not have anything aftermarket

[cn555ic]

8. OBD.INI is in C:\ediabas\bin and \system32. COM port is set to 1


You need to have it in C:\windows and not \system32.


Hope that helps. Also if your dcan cable has a blue circuit board chip on the obd connection side the cable is defective. Vendors are still selling these cables even though it will not work regardless if pin 7 or 8 is connected. This cable is junk

[smiley32]

Yes I was wrong, C:\windows OBD.ini
and ediabas:ini C:\ediabas\bin

does not work

[BRAISKI]

I am trying to install this to another computer and I am running into an issue, I can find NCSEXPER.EXE

Edit: NM it finally worked, but just the icon didn't change.

Does anyone knows this?
BT_DATA_SERVICE
nicht_aktiv
BT_MODUL_ON_OFF
nicht_aktiv