N54 Dyno Chart Compilation

kanecvl · 10-27-2010, 06:16 PM

Tranny: AT
Mods:GIAC Stage 1, DCI
temp: low 60's
Humidity: 20%
Gas: shell 93

Quisp · 10-28-2010, 12:17 AM

I notice a few of the dynos have the torque and HP crossing lower than others. It seems most cross at 5250 rpm(I heard the reason but cant remember right now) What causes the others to cross at lower rpm?

kanecvl · 10-28-2010, 08:31 AM

Quote:

Originally Posted by Quisp

I notice a few of the dynos have the torque and HP crossing lower than others. It seems most cross at 5250 rpm(I heard the reason but cant remember right now) What causes the others to cross at lower rpm?

i would like to find out iv heard that its because I have no exhaust but I think thats bologna. Even stock cars usually cross around 52

onebadmofo · 10-28-2010, 08:39 AM

Car is absolutely stock except for Procede, even stock airbox

1st run (blue) was map 0
2nd run (red) was map 2
3rd run (green) was map 2
4th run (purple) was map 1

Maps were switched on the fly and we didn't give a chance to Procede to adapt to new settings so there's possibly 10-15 more hp in there.

Quisp · 10-29-2010, 10:10 AM

Kane, how dpo you like the GIAC? From the curves it looks like it has a strong low end and pretty smooth.

kanecvl · 10-29-2010, 10:55 AM

Quote:

Originally Posted by Quisp

Kane, how dpo you like the GIAC? From the curves it looks like it has a strong low end and pretty smooth.

pm sent.

BrianMN · 10-31-2010, 08:36 PM

Quote:

Originally Posted by Quisp

I notice a few of the dynos have the torque and HP crossing lower than others. It seems most cross at 5250 rpm(I heard the reason but cant remember right now) What causes the others to cross at lower rpm?

You're correct that HP and torque cross at 5250...

I believe the answer to this is in the formatting of the dyno graph.. Notice that, on a given horizontal line, HP and TQ values can be about 50 apart.

Quisp · 11-01-2010, 01:18 AM

I guess that makes sense to a degree, but the Dyno Dynamics one crosses under 4000 which wolld mean quite a large variance. Is there some other factor that would chnge the 5250 number?

BrianMN · 11-01-2010, 03:38 PM

Are you referring to Qmax's on page 1? If so, the torque is apx. 90 units higher than the HP at the same X-axis. The TQ/HP will always cross at 5250.

treytreyfeva · 11-01-2010, 04:29 PM

How much WHP should i expect with V4 autotuned ,DCI and AR DP's (e90/auto)

BrianMN · 11-01-2010, 07:30 PM

Quote:

Originally Posted by treytreyfeva

How much WHP should i expect with V4 autotuned ,DCI and AR DP's (e90/auto)

Depending on what autotuning does, I'd expect somewhere in the 360-380 range.

m54b25 · 11-02-2010, 10:44 AM

Stock MY09 E90 335i with mild PAW Flash tune (for wife driving)

BrianMN · 11-02-2010, 10:10 PM

^ Looks good! Pretty powerful for just a 'mild' tune

m54b25 · 11-04-2010, 04:18 PM

Quote:

Originally Posted by BrianMN

^ Looks good! Pretty powerful for just a 'mild' tune

Thanks BrianNM for the complement. Actually, will be testing the DME MSD8.x.x. built-in overboost-mode that can be used for additional Hp increase... just need to finalize some road testing & decide holding time max & when to stop =)

STONEY_M5 · 11-05-2010, 09:42 AM

Quote:

Originally Posted by Quisp

Dinan Stage 3 with intercooler and larger oil cooler. Also shows with stock software(dotted line).
(The people at Dinan weren't completely happy with these numbers and we are working on it. They feelit should be able to get 20% more HP)

I have a stage 2 with the same numbers and no additional mods... So yea there is def a problem with your numbers.

m54b25 · 11-30-2010, 04:13 PM

Here's a Mild Medium Hot Dynoed N54 =)

Quote:

Originally Posted by BrianMN

^ Looks good! Pretty powerful for just a 'mild' tune

bigdog34uz · 12-07-2010, 04:29 PM

These are some really high numbers for just a tune. Are all these on legit dyno's just curious. Mild Flash tune doing 344 with 364lbs of torque is high! I want those numbers. I want to do wife driving.

onebadmofo · 12-07-2010, 05:04 PM

Quote:

Originally Posted by bigdog34uz

These are some really high numbers for just a tune. Are all these on legit dyno's just curious. Mild Flash tune doing 344 with 364lbs of torque is high! I want those numbers. I want to do wife driving.

Take a look at my graph, I was with just Procede and had 335hp / 366tq.

LaLakers91tc · 12-08-2010, 12:40 AM

Quote:

Originally Posted by Quisp

I notice a few of the dynos have the torque and HP crossing lower than others. It seems most cross at 5250 rpm(I heard the reason but cant remember right now) What causes the others to cross at lower rpm?

they shouldn't ever cross at any other number....
HP is a number derived from Torque (foot pounds) x RPM / 5252

Thus at 5252 on every graph, torque will equal hp

s2k_335i · 12-10-2010, 09:32 PM

New Dyno:
Degree: 70
Tune: Proceed V4, DCI, DP, Stock IC (removed AMS FMIC)
the number seem low this time for some reason.

BrianMN · 12-10-2010, 10:29 PM

Looks very low. Datalogs would help a lot.

Forcefed3 · 12-10-2010, 11:17 PM

Your numbers are very low for your mods, why did you remove IC?

10-27-2010, 06:16 PM	#23
kanecvl Lieutenant 22 Rep 586 Posts Drives: 15 535d Join Date: Aug 2009 Location: NC iTrader: (6)	Tranny: AT Mods:GIAC Stage 1, DCI temp: low 60's Humidity: 20% Gas: shell 93 Attached Images __________________
	Appreciate 0 Quote

10-28-2010, 12:17 AM	#24
Quisp Does not play well with others 81 Rep 1,787 Posts Drives: BMW Join Date: Apr 2007 Location: Arizona iTrader: (4)	I notice a few of the dynos have the torque and HP crossing lower than others. It seems most cross at 5250 rpm(I heard the reason but cant remember right now) What causes the others to cross at lower rpm? __________________
	Appreciate 0 Quote

10-28-2010, 08:39 AM	#26
onebadmofo Colonel 353 Rep 2,394 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	Car is absolutely stock except for Procede, even stock airbox 1st run (blue) was map 0 2nd run (red) was map 2 3rd run (green) was map 2 4th run (purple) was map 1 Maps were switched on the fly and we didn't give a chance to Procede to adapt to new settings so there's possibly 10-15 more hp in there.
	Appreciate 0 Quote

10-29-2010, 10:10 AM	#27
Quisp Does not play well with others 81 Rep 1,787 Posts Drives: BMW Join Date: Apr 2007 Location: Arizona iTrader: (4)	Kane, how dpo you like the GIAC? From the curves it looks like it has a strong low end and pretty smooth. __________________
	Appreciate 0 Quote

11-01-2010, 01:18 AM	#30
Quisp Does not play well with others 81 Rep 1,787 Posts Drives: BMW Join Date: Apr 2007 Location: Arizona iTrader: (4)	I guess that makes sense to a degree, but the Dyno Dynamics one crosses under 4000 which wolld mean quite a large variance. Is there some other factor that would chnge the 5250 number? __________________
	Appreciate 0 Quote

11-01-2010, 03:38 PM	#31
BrianMN Banned 116 Rep 2,428 Posts Drives: 4 Door Family Sedan Join Date: Sep 2009 Location: Minneapolis iTrader: (7)	Are you referring to Qmax's on page 1? If so, the torque is apx. 90 units higher than the HP at the same X-axis. The TQ/HP will always cross at 5250.
	Appreciate 0 Quote

11-01-2010, 04:29 PM	#32
treytreyfeva Puro Pinche Party! 23 Rep 133 Posts Drives: 2007 E90 335i TiAG Join Date: Mar 2007 Location: SFV818 iTrader: (1)	How much WHP should i expect with V4 autotuned ,DCI and AR DP's (e90/auto)
	Appreciate 0 Quote

11-02-2010, 10:10 PM	#35
BrianMN Banned 116 Rep 2,428 Posts Drives: 4 Door Family Sedan Join Date: Sep 2009 Location: Minneapolis iTrader: (7)	^ Looks good! Pretty powerful for just a 'mild' tune
	Appreciate 0 Quote

12-07-2010, 04:29 PM	#39
bigdog34uz Major 91 Rep 1,282 Posts Drives: 2007 e90 335i Join Date: Jun 2010 Location: VA iTrader: (3) Garage List 2012 bmw n55 335i [0.00]	These are some really high numbers for just a tune. Are all these on legit dyno's just curious. Mild Flash tune doing 344 with 364lbs of torque is high! I want those numbers. I want to do wife driving. __________________ 13.01 @ 107.6mph Mods: OETuning........ 13.00 @ 108.89 JB4 Times
	Appreciate 0 Quote

12-10-2010, 09:32 PM	#42
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	New Dyno: Degree: 70 Tune: Proceed V4, DCI, DP, Stock IC (removed AMS FMIC) the number seem low this time for some reason. Attached Images
	Appreciate 0 Quote

12-10-2010, 10:29 PM	#43
BrianMN Banned 116 Rep 2,428 Posts Drives: 4 Door Family Sedan Join Date: Sep 2009 Location: Minneapolis iTrader: (7)	Looks very low. Datalogs would help a lot.
	Appreciate 0 Quote

12-10-2010, 11:17 PM	#44
Forcefed3 Banned 129 Rep 4,732 Posts Drives: 2008 335i Join Date: May 2010 Location: South iTrader: (2) Garage List 2008 335i [1.00]	Your numbers are very low for your mods, why did you remove IC?
	Appreciate 0 Quote