Retrofitting FLA (High Beam Assistant) DIY

smiley32 · 04-06-2013, 12:10 AM

I have a problem, FLA change high beam, in the instrument cluster appears the blue beam, but in reality it low beam!
Can anyone confirm if it works FLA with halogen lamp? (E90LCI)

Jose_JN · 04-08-2013, 02:28 AM

Quote:

Originally Posted by smiley32

I have a problem, FLA change high beam, in the instrument cluster appears the blue beam, but in reality it low beam!
Can anyone confirm if it works FLA with halogen lamp? (E90LCI)

Post your FLA and FRM trc's (use a pastebin link for example)
I have always retrofitted over Xenón but maybe it is possible over halogen too.

If you configure a new car at BMW official web site, you can add FLA without xenon, so this has to be possible.

Regards

smiley32 · 04-08-2013, 03:30 AM

Hi this is the FLA file

http://pastebin.com/raw.php?i=E8wUwX5k

Edit: DONE!

FL_AUS_BEI_BIX_IN_S_FLC nicht_aktiv

BI_XENON_BEI_LH aktiv

XENON_AL_VERBAUT aktiv

vmiro · 12-08-2013, 03:26 PM

One off-topic question.
On the rear side of the mirror there is some sort of a sensor, what is that for?

mIRO

Jose_JN · 12-09-2013, 07:16 AM

Quote:

Originally Posted by vmiro

One off-topic question.
On the rear side of the mirror there is some sort of a sensor, what is that for?

mIRO

It is for the autodim feature.

You have two sensors (one on the glass and the one you are showing).
The mirror compare the light received for both sensors and darkens the glass if there is any possibility to blind the driver.

Regards

vmiro · 12-09-2013, 11:58 PM

Quote:

Originally Posted by Jose_JN

It is for the autodim feature.

You have two sensors (one on the glass and the one you are showing).
The mirror compare the light received for both sensors and darkens the glass if there is any possibility to blind the driver.

Thanks.

As for the FLA retrofitting, are you sure that the rain sensor is required? In ETK I can find a rearview mirrors just with EC and FLA function, no rain sensor?

mIRO

Jose_JN · 12-13-2013, 01:41 AM

Quote:

Originally Posted by vmiro

Thanks.

As for the FLA retrofitting, are you sure that the rain sensor is required? In ETK I can find a rearview mirrors just with EC and FLA function, no rain sensor?

mIRO

You need to have automatic headlamps since the FLA only works in auto position (it comes always with rain sensor)
Maybe you can find a way to code it without RLS but I didn't try...

Or maybe it is enough with the auto light switch (without the RLS sensor)

Regars.

Vagsfjord · 12-17-2013, 04:02 PM

FLA is working like a charm but I don't get any symbol in my kombi/cluster. My car is a 2005 E91 325i. I have coded kombi, FLA and FRM3 Max Brose.

Jose_JN · 12-20-2013, 03:19 AM

Quote:

Originally Posted by Vagsfjord

FLA is working like a charm but I don't get any symbol in my kombi/cluster. My car is a 2005 E91 325i. I have coded kombi, FLA and FRM3 Max Brose.

Nice! I have seen more cars without symbols in the cluster after retrofitting. I think this is because the soft version. Maybe you can try to upgrade it.

Regards.

Vagsfjord · 12-21-2013, 02:00 AM

Thanks! Upgrading only kombi won't cause problems communicating with other modules?

Jose_JN · 12-22-2013, 06:09 AM

Quote:

Originally Posted by Vagsfjord

Thanks! Upgrading only kombi won't cause problems communicating with other modules?

I have upgraded some modules without any problems.
Of course the best solution is upgrade the whole car at the same I-LEVEL but everything is working properly.

Regards.

rioman · 07-04-2014, 07:14 AM

Hi! Trying to code FLA with no success. I've coded $5AC VO to CAS, NFRM and KOMBI modules. There is an issue with FLA module - I can't load or read my config from it. Any advice how I can code it? BTW I have no FRM module at all. Does FRM equal to NFRM???

Vagsfjord · 07-06-2014, 01:12 PM

Quote:

Originally Posted by rioman

Hi! Trying to code FLA with no success. I've coded $5AC VO to CAS, NFRM and KOMBI modules. There is an issue with FLA module - I can't load or read my config from it. Any advice how I can code it? BTW I have no FRM module at all. Does FRM equal to NFRM???

Triple check your wiring. FRM and NFRM is sort of equal...

borisivan · 07-18-2014, 12:18 PM

... it automatically turns the highbeams on when it detects a douchebag coming at you with his highbeams on, even though as you were both approaching the same curve in the road, he apparently couldn't be bothered to turn his off, even though you did?

I'm done with these a-holes. Now, when I give them the high beams in retaliation for having theirs on, and they *finally* turn theirs off, I just leave mine on. F em.

anom3 · 11-27-2014, 03:17 PM

just did this on my e92 m3.

i cannot say with certainty that it works as i have yet to hit the highway and test it out...

that being said...

the module shows up in my list of modules, added to vo, and reset the required modules. that part worked.

did anyone have any trouble alligning the 2 covers with the mirror... mine isnt perfect, the camera is 100% visible, but its a bit too high and not aligned properly with the covers.

any ideas?

parts ordered are correct for sure according to realoem. both mirror and covers are brand new.

phubar · 11-28-2014, 10:45 PM

Whats the part number for e93? thanks.

Jose_JN · 12-02-2014, 08:17 AM

Quote:

Originally Posted by anom3

just did this on my e92 m3.

i cannot say with certainty that it works as i have yet to hit the highway and test it out...

that being said...

the module shows up in my list of modules, added to vo, and reset the required modules. that part worked.

did anyone have any trouble alligning the 2 covers with the mirror... mine isnt perfect, the camera is 100% visible, but its a bit too high and not aligned properly with the covers.

any ideas?

parts ordered are correct for sure according to realoem. both mirror and covers are brand new.

I have the same problem with the covers but it does not affect to the FLA at all.

Regards

ssshake · 03-15-2015, 07:13 PM

I want to do this and I think I'm capable of pulling it off. But what I don't get is which replacement mirror model number is it? I currently have rain sensor and auto dim.

szabee · 07-16-2015, 07:34 PM

Hi.

I installed the mirror with FLA function to my 2009 E91 LCI with Halogen Headlamps!
I added to VO, and coding it up.
NCS Expert see it...
My problem: The High beam light comes on the instrument panel, I see the FLA sign on the instrument too, but the high beam don't turn on! Looks like everything works fine, only the lights missing....

What do you think might be wrong?

Thank you for your helping...

Br

Mate

ptpending · 07-17-2015, 05:39 AM

FLA is incompatible with Halogen lamps, you need to fool your car electronics, it is should think that you have xenon, then wire xenon high beam shutter wires via relay to the halogen high beams

szabee · 07-17-2015, 11:34 AM

Quote:

Originally Posted by ptpending

FLA is incompatible with Halogen lamps, you need to fool your car electronics, it is should think that you have xenon, then wire xenon high beam shutter wires via relay to the halogen high beams

Oh... I'm sad.

Then I must retrofit to xenon. No any solution?
Then what I need for retrofit? Only the xenon lamps or any other modules are need?

Thx for your answer

Br

ptpending · 07-18-2015, 09:44 AM

xenon headlights
front and rear autolevel sensors
headlight washing system

04-06-2013, 12:10 AM	#23
smiley32 New Member 2 Rep 27 Posts Drives: BMW 318D Join Date: Sep 2012 Location: italia iTrader: (0)	I have a problem, FLA change high beam, in the instrument cluster appears the blue beam, but in reality it low beam! Can anyone confirm if it works FLA with halogen lamp? (E90LCI)
	Appreciate 0 Quote

04-08-2013, 03:30 AM	#25
smiley32 New Member 2 Rep 27 Posts Drives: BMW 318D Join Date: Sep 2012 Location: italia iTrader: (0)	Hi this is the FLA file http://pastebin.com/raw.php?i=E8wUwX5k Edit: DONE! FL_AUS_BEI_BIX_IN_S_FLC nicht_aktiv BI_XENON_BEI_LH aktiv XENON_AL_VERBAUT aktiv Last edited by smiley32; 04-13-2013 at 08:05 AM.. Reason: update
	Appreciate 1 lab_rat396.50 Quote

12-08-2013, 03:26 PM	#26
vmiro Enlisted Member 16 Rep 35 Posts Drives: BMW 318d E91 Join Date: Oct 2009 Location: Bijeljina, BiH iTrader: (0)	One off-topic question. On the rear side of the mirror there is some sort of a sensor, what is that for? mIRO
	Appreciate 0 Quote

12-17-2013, 04:02 PM	#30
Vagsfjord Private 11 Rep 57 Posts Drives: 325i E91 2005 Join Date: May 2013 Location: Oslo, Norway iTrader: (0)	FLA is working like a charm but I don't get any symbol in my kombi/cluster. My car is a 2005 E91 325i. I have coded kombi, FLA and FRM3 Max Brose.
	Appreciate 0 Quote

12-21-2013, 02:00 AM	#32
Vagsfjord Private 11 Rep 57 Posts Drives: 325i E91 2005 Join Date: May 2013 Location: Oslo, Norway iTrader: (0)	Thanks! Upgrading only kombi won't cause problems communicating with other modules?
	Appreciate 0 Quote

07-04-2014, 07:14 AM	#34
rioman Registered 2 Rep 1 Posts Drives: e84 Join Date: Jan 2014 Location: mow iTrader: (0)	Hi! Trying to code FLA with no success. I've coded $5AC VO to CAS, NFRM and KOMBI modules. There is an issue with FLA module - I can't load or read my config from it. Any advice how I can code it? BTW I have no FRM module at all. Does FRM equal to NFRM???
	Appreciate 0 Quote

07-18-2014, 12:18 PM	#36
borisivan craptastic 21 Rep 281 Posts Drives: 2010 335xi Join Date: Jul 2007 Location: hell in a handbasket iTrader: (0)	is it possible to mod such that.... ... it automatically turns the highbeams on when it detects a douchebag coming at you with his highbeams on, even though as you were both approaching the same curve in the road, he apparently couldn't be bothered to turn his off, even though you did? I'm done with these a-holes. Now, when I give them the high beams in retaliation for having theirs on, and they finally turn theirs off, I just leave mine on. F em.
	Appreciate 0 Quote

11-27-2014, 03:17 PM	#37
anom3 Captain 271 Rep 955 Posts Drives: F30 335ix Join Date: Apr 2014 Location: Behind the wheel iTrader: (0)	just did this on my e92 m3. i cannot say with certainty that it works as i have yet to hit the highway and test it out... that being said... the module shows up in my list of modules, added to vo, and reset the required modules. that part worked. did anyone have any trouble alligning the 2 covers with the mirror... mine isnt perfect, the camera is 100% visible, but its a bit too high and not aligned properly with the covers. any ideas? parts ordered are correct for sure according to realoem. both mirror and covers are brand new.
	Appreciate 0 Quote

11-28-2014, 10:45 PM	#38
phubar Lieutenant 91 Rep 465 Posts Drives: 335 Vert Join Date: Apr 2013 Location: Fort Campbell KY iTrader: (8)	Whats the part number for e93? thanks.
	Appreciate 0 Quote

03-15-2015, 07:13 PM	#40
ssshake Second Lieutenant 17 Rep 271 Posts Drives: 328i coupe 2009 Join Date: Aug 2014 Location: Waterloo iTrader: (0)	I want to do this and I think I'm capable of pulling it off. But what I don't get is which replacement mirror model number is it? I currently have rain sensor and auto dim.
	Appreciate 0 Quote

07-16-2015, 07:34 PM	#41
szabee New Member 4 Rep 5 Posts Drives: BMW F06 640i M-Tech Join Date: Mar 2015 Location: Hungary iTrader: (0)	Hi. I installed the mirror with FLA function to my 2009 E91 LCI with Halogen Headlamps! I added to VO, and coding it up. NCS Expert see it... My problem: The High beam light comes on the instrument panel, I see the FLA sign on the instrument too, but the high beam don't turn on! Looks like everything works fine, only the lights missing.... What do you think might be wrong? Thank you for your helping... Br Mate
	Appreciate 0 Quote

07-17-2015, 05:39 AM	#42
ptpending Colonel 527 Rep 2,916 Posts Drives: e81 Join Date: Dec 2013 Location: Poland iTrader: (1)	FLA is incompatible with Halogen lamps, you need to fool your car electronics, it is should think that you have xenon, then wire xenon high beam shutter wires via relay to the halogen high beams __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

07-18-2015, 09:44 AM	#44
ptpending Colonel 527 Rep 2,916 Posts Drives: e81 Join Date: Dec 2013 Location: Poland iTrader: (1)	xenon headlights front and rear autolevel sensors headlight washing system __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote