Transfer Case Upgrade Possibilities

King mode · 08-07-2012, 11:20 PM

I'm in for at least $25.

BES335xi · 08-08-2012, 12:04 AM

I'm looking to sell my car and hop on an I 135/335i MT well see..But being an XI owner for the past 6 years or so and having my Set Positioning Motor/Servo Motor take a crap on me and being FBO and scared to drive it hard i have to step away from it.

But count me in for $25 or whatever it is going to be and contact me cause i dont frequently check the XI section, but i'd love to see something for XI being made and who knows maybe someday i come back to it. So yes add me to the list.

nailer335 · 08-08-2012, 12:16 AM

Quote:

Originally Posted by pits200

1.) Pits200
2.) Nailer335
3.) KontroversyXI
4.) Tahoedr
5.) UDM335Xdrive
6.) Mattsfeir
7.) 335(EX)(EYE)

I'm not sure how to go about doing this though. Is there a way to create a paypal escrow account or something. I don't think everyone would want to paypal money directly to any one persons particular account.

Perhaps we could send the money to the shop that assumes responsibility for the upgrade?

Doyle · 08-08-2012, 01:53 AM

It is the gear on part no 27 and part no 33.

drfrink24 · 08-08-2012, 08:28 AM

I'm in.

Carl Morris · 08-08-2012, 10:59 AM

I would recommend considering Jack's Transmissions in Colorado Springs. He does high performance rebuilds on manual transmissions, specializing in Mitsubishis but has done a BMW tranny before. He's also worked on a lot of transfer cases, is an expert in that area, and will be doing my work as soon as I need any. Custom work is no problem and he enjoys figuring out ways to make things better. His test bench that he uses to test rebuilt transmissions prior to delivering them to the customer is a great example of that. I'm in, and can work with him if needed to help get him parts to look at...

pits200 · 08-08-2012, 11:50 AM

Up to 11 people already, looking good.

pits200 · 08-08-2012, 11:51 AM

So the conclusion is that there is only 1 TC for all xi models, right?

Slops · 08-08-2012, 12:03 PM

Quote:

Originally Posted by pits200

So the conclusion is that there is only 1 TC for all xi models, right?

ATC 300 is used in models 335i xi Sedan - 2006 to 2012 and Coupe 2007 - 2012

MakkkD · 08-08-2012, 12:13 PM

Quote:

Originally Posted by pits200

1.) Pits200
2.) Nailer335
3.) KontroversyXI
4.) Tahoedr
5.) UDM335Xdrive
6.) Mattsfeir
7.) 335(EX)(EYE)

I'm not sure how to go about doing this though. Is there a way to create a paypal escrow account or something. I don't think everyone would want to paypal money directly to any one persons particular account.

we can just set one up...BTW I got 5 on it

335(EX)(EYE) · 08-08-2012, 01:43 PM

Quote:

Originally Posted by MakkkD

we can just set one up...BTW I got 5 on it

somebody will just have to send the money to a trusted person etc..i could offer discounted shipping or free shipping depending the actual dimensions of the TC, how much does it way? (i have access to business ups acount of my own)

pits200 · 08-08-2012, 01:57 PM

Quote:

Originally Posted by 335(EX)(EYE)

somebody will just have to send the money to a trusted person etc..i could offer discounted shipping or free shipping depending the actual dimensions of the TC, how much does it way? (i have access to business ups acount of my own)

I know this isn't great range but I'd say between 75-100lbs

335(EX)(EYE) · 08-08-2012, 02:37 PM

Quote:

Originally Posted by pits200

I know this isn't great range but I'd say between 75-100lbs

thats doable, whoever is in charge, contact me and i can offer major discounts, il send a prepaid label, and then recieve payment from whoever has the cash money

what are the rough dimensions?

nailer335 · 08-08-2012, 09:02 PM

Quote:

Originally Posted by MakkkD

we can just set one up...BTW I got 5 on it

He's throwing a five in on it!!! How many times...

nailer335 · 08-08-2012, 09:06 PM

Quote:

Originally Posted by Carl Morris

I would recommend considering Jack's Transmissions in Colorado Springs. He does high performance rebuilds on manual transmissions, specializing in Mitsubishis but has done a BMW tranny before. He's also worked on a lot of transfer cases, is an expert in that area, and will be doing my work as soon as I need any. Custom work is no problem and he enjoys figuring out ways to make things better. His test bench that he uses to test rebuilt transmissions prior to delivering them to the customer is a great example of that. I'm in, and can work with him if needed to help get him parts to look at...

Carl,

Thanks for the offer. In my shorter experience, a personal connection to a reputable company will increase the integrity of the work, making it all more worth while for everyone who participates. I'd be interested in hearing what you are able to work out with Jack's Transmissions, given the acclaimed experience and knowledge, which I have no reason to doubt. A shop like this may be a better way to go, price-wise, than a company like VAC that may (or may not) use its reputation to increase pricing. I'm no voice of authority, but feel free to create a proposal for JT and report back. Thanks.

Carl Morris · 08-09-2012, 12:42 AM

So do we know anybody with a broken one, or do we need to go junkyard hunting?

nailer335 · 08-09-2012, 02:54 AM

We'll probably have to junk yard hunt unless someone volunteers

Carl Morris · 08-11-2012, 07:07 PM

I'm back home, sent an email off to Jack pointing him to this thread.

http://www.jackstransmissions.com/

akotten · 08-12-2012, 12:32 AM

Quote:

Originally Posted by Carl Morris

I would recommend considering Jack's Transmissions in Colorado Springs. He does high performance rebuilds on manual transmissions, specializing in Mitsubishis but has done a BMW tranny before. He's also worked on a lot of transfer cases, is an expert in that area, and will be doing my work as soon as I need any. Custom work is no problem and he enjoys figuring out ways to make things better. His test bench that he uses to test rebuilt transmissions prior to delivering them to the customer is a great example of that. I'm in, and can work with him if needed to help get him parts to look at...

Nice! I know Jack's is always the place to go for VR4 tranny rebuilds. Former 3S owner?

Carl Morris · 08-12-2012, 01:32 AM

No, former GVR4 owner :-). Jack ended up buying my car from me for parts when it was worn enough that I was tired of trying to keep it on the road.

nailer335 · 08-12-2012, 06:54 PM

Very good. I look forward to his response. I spoke with Dzenno and it doesn't look like this is within his shop's capabilities. He said that he could extend references to shops that may be able to help, so thats an option too.

Rob.K · 08-13-2012, 12:07 AM

Count me in for $25

08-07-2012, 11:20 PM	#23
King mode First Lieutenant 8 Rep 374 Posts Drives: 335xi Join Date: May 2012 Location: Denver iTrader: (0)	I'm in for at least $25. __________________ 2008 335xi AT Cobb AP stage 1, drop in filter, the rest stock 13.10@106.01 w/ 1.86 60' (5,800' altitude)
	Appreciate 0 Quote

08-08-2012, 12:04 AM	#24
BES335xi Colonel 92 Rep 2,132 Posts Drives: FBO+ N54xi Join Date: Mar 2008 Location: Queens, NYC iTrader: (4) Garage List 03/07 E90 335xi [1.00]	I'm looking to sell my car and hop on an I 135/335i MT well see..But being an XI owner for the past 6 years or so and having my Set Positioning Motor/Servo Motor take a crap on me and being FBO and scared to drive it hard i have to step away from it. But count me in for $25 or whatever it is going to be and contact me cause i dont frequently check the XI section, but i'd love to see something for XI being made and who knows maybe someday i come back to it. So yes add me to the list. __________________ JB4+usb \| P3 Vent Boost Gauge v2 \| BMS OCC \| BMS DCI \| AMS FMIC \| AR xi CL DP's \| BT Tool \| Edibias/NCSExpert/INPA BMW Coding \| Cyba Quad Exhaust tips \| M-Tech Rear & M3 Front Bumper \| Red Cyba Air Scoops \| Blacklines \| Vinyl Overlays \| ACS Roof Spoiler \| Matte Black Grilles \| LED Side Mirrors \| Rear Euro Fogs \| etc.. .
	Appreciate 0 Quote

08-08-2012, 01:53 AM	#26
Doyle Hellafunctional 37 Rep 426 Posts Drives: 335xi Join Date: Nov 2010 Location: N/A iTrader: (2)	It is the gear on part no 27 and part no 33. __________________ Go: Cobb S2+, Big Tom FMIC, CP-E DP & DCI, Royal Muffler, AR OC Turn: TC Kline/Swift SA, Vorshlag Plates, UUC Front Bar, H&R M3 Rear Bar, VAC endlinks & spacers, Forgeline 18x9.5/NT05 265 Square Stop: Endless MX72, Stoptech Rotors/Lines, Motul RBF600
	Appreciate 0 Quote

08-08-2012, 08:28 AM	#27
drfrink24 Second Lieutenant 13 Rep 233 Posts Drives: 2008 335xi Join Date: Apr 2011 Location: SE MN iTrader: (0)	I'm in.
	Appreciate 0 Quote

08-08-2012, 10:59 AM	#28
Carl Morris Captain 19 Rep 650 Posts Drives: 2008 335xi 6MT Join Date: Feb 2012 Location: San Jose, CA iTrader: (0)	I would recommend considering Jack's Transmissions in Colorado Springs. He does high performance rebuilds on manual transmissions, specializing in Mitsubishis but has done a BMW tranny before. He's also worked on a lot of transfer cases, is an expert in that area, and will be doing my work as soon as I need any. Custom work is no problem and he enjoys figuring out ways to make things better. His test bench that he uses to test rebuilt transmissions prior to delivering them to the customer is a great example of that. I'm in, and can work with him if needed to help get him parts to look at...
	Appreciate 0 Quote

08-08-2012, 11:50 AM	#29
pits200 Colonel 550 Rep 2,598 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	Up to 11 people already, looking good.
	Appreciate 0 Quote

08-08-2012, 11:51 AM	#30
pits200 Colonel 550 Rep 2,598 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	So the conclusion is that there is only 1 TC for all xi models, right?
	Appreciate 0 Quote

08-09-2012, 12:42 AM	#38
Carl Morris Captain 19 Rep 650 Posts Drives: 2008 335xi 6MT Join Date: Feb 2012 Location: San Jose, CA iTrader: (0)	So do we know anybody with a broken one, or do we need to go junkyard hunting?
	Appreciate 0 Quote

08-09-2012, 02:54 AM	#39
nailer335 Captain 25 Rep 699 Posts Drives: e90 335i f30 330i g20 m340i Join Date: Feb 2010 Location: Texas iTrader: (0) Garage List 2008 335i [0.00] 2022 m340i [0.00] 2017 330i xdrive [0.00]	We'll probably have to junk yard hunt unless someone volunteers
	Appreciate 0 Quote

08-11-2012, 07:07 PM	#40
Carl Morris Captain 19 Rep 650 Posts Drives: 2008 335xi 6MT Join Date: Feb 2012 Location: San Jose, CA iTrader: (0)	I'm back home, sent an email off to Jack pointing him to this thread. http://www.jackstransmissions.com/ Last edited by Carl Morris; 08-11-2012 at 07:10 PM.. Reason: Added link
	Appreciate 0 Quote

08-12-2012, 01:32 AM	#42
Carl Morris Captain 19 Rep 650 Posts Drives: 2008 335xi 6MT Join Date: Feb 2012 Location: San Jose, CA iTrader: (0)	No, former GVR4 owner :-). Jack ended up buying my car from me for parts when it was worn enough that I was tired of trying to keep it on the road.
	Appreciate 0 Quote

08-12-2012, 06:54 PM	#43
nailer335 Captain 25 Rep 699 Posts Drives: e90 335i f30 330i g20 m340i Join Date: Feb 2010 Location: Texas iTrader: (0) Garage List 2008 335i [0.00] 2022 m340i [0.00] 2017 330i xdrive [0.00]	Very good. I look forward to his response. I spoke with Dzenno and it doesn't look like this is within his shop's capabilities. He said that he could extend references to shops that may be able to help, so thats an option too.
	Appreciate 0 Quote

08-13-2012, 12:07 AM	#44
Rob.K Private First Class 93 Rep 181 Posts Drives: 08 135i, 08 4.8i X5 Join Date: Aug 2010 Location: Edmonton, AB iTrader: (3)	Count me in for $25
	Appreciate 0 Quote