Software - Help yourself

sdbmwcoding · 02-02-2020, 08:40 PM

Quote:

Originally Posted by frank944

Thanks sd*********, now I need to find what should I buy from the car battery for 2012 bmw 528i xdrive? How do I know what spec of my car battery without open the trunk?

Thanks

Frank

Realoem.com

Type last 7 of vin in there, you'll then be taken to a screen with categories for your car. Choose vehicle electrical system and you'll then see an option for battery. Click it and you'll see a list of compatible batteries for your car. Just take note of the Amp Hour ratings and CCA. Then you can go to oreillys or any automotive parts store, let the clerk know the amp hours and CCA rating you need and you're all set. No need for Oem battery, just as long as it's the same specs.

eugenecp · 02-02-2020, 11:13 PM

Thanks for the collection.

Unknown_Car · 02-02-2020, 11:22 PM

Quote:

Originally Posted by frank944

Thanks sd*********, now I need to find what should I buy from the car battery for 2012 bmw 528i xdrive? How do I know what spec of my car battery without open the trunk?

Thanks

Frank

That's what I call lazy lol, "without open the trunk". Is it that hard to get up and do something yourself?

sdbmwcoding · 02-03-2020, 12:58 AM

Quote:

Originally Posted by Roma_335i

Quote:

Originally Posted by frank944

Thanks sd*********, now I need to find what should I buy from the car battery for 2012 bmw 528i xdrive? How do I know what spec of my car battery without open the trunk?

Thanks

Frank

That's what I call lazy lol, "without open the trunk". Is it that hard to get up and do something yourself?

Hahah in his defense there's usually some sort of panel you gotta take off and kinda hard to read the sticker of battery specs since lots of times there's a brace connected on top that blocks it.

Unknown_Car · 02-03-2020, 01:06 AM

Quote:

Originally Posted by sd*********

Hahah in his defense there's usually some sort of panel you gotta take off and kinda hard to read the sticker of battery specs since lots of times there's a brace connected on top that blocks it.

I know lol. I am just saying... people are getting to lazy this days, and expect alot without trying to do something themselves.

frank944 · 02-06-2020, 07:29 PM

Good Evening,

I got the battery and Ether Cable, now I just have final question about the ISTA software on laptop, how can I know the software or the cable are working, software can open, and got to the register battery exchange screen, I just want make sure the software and cable are working and then ready to remove my old battery. Please Advice

Thanks

Frank

sdbmwcoding · 02-06-2020, 07:58 PM

Quote:

Originally Posted by frank944

Good Evening,

I got the battery and Ether Cable, now I just have final question about the ISTA software on laptop, how can I know the software or the cable are working, software can open, and got to the register battery exchange screen, I just want make sure the software and cable are working and then ready to remove my old battery. Please Advice

Thanks

Frank

If you can connect through ista then it's working

frank944 · 02-06-2020, 08:04 PM

i can use software and connect with the cable, is there anyway can verify see the cable is working?

Thanks

Frank

IllSic_Design · 02-06-2020, 08:08 PM

Quote:

Originally Posted by frank944

i can use software and connect with the cable, is there anyway can verify see the cable is working?

Thanks

Frank

If you got as far as you said in the other post then yes the cable is working. You won't be able to go very far if the computer/program can't connect to the car

ctuna · 02-06-2020, 08:25 PM

Get Standard tools installed .
Go to Inpa run Functional jobs f2 and f3 .

frank944 · 02-06-2020, 11:34 PM

I losted tonight. sorry guys....

frank944 · 02-06-2020, 11:44 PM

after installed the battery, when I am trying to use ISTA+. in after enter "enter battery exchange in the same capacity", then ask is the newly installed battery original BMW parts, since I bought from BMW dealer, I said Yes,and then asked me input 12 digital data matrix, so I typed the 12 digits, and then give me the error: Error in testmodule: ABL_WAR_AS6120_WECHEL, and the only option is detail and ok, so I click detail as below:

System.Exception: Failed to invoke service program. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ToInt32(String value)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.Start(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.run(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.ISTAModule.callModuleRef (String refPath, ParameterContainer InParameters, ParameterContainer& OutParameters, ParameterContainer& InAndOutParameters)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_04_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.D ataMatrixCode()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_03_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A uswahl_01_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A G6100_AEP0()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.S tart(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.r un(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.DoInvoke()
--- End of inner exception stack trace ---
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.Invoke()
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.In vokeRunMethod(MethodInfo run, Object[] param)
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.do It()

click OK let me go back to battery exchange again.

any advice?

Thanks

Frank

sdbmwcoding · 02-07-2020, 12:03 AM

Quote:

Originally Posted by frank944

after installed the battery, when I am trying to use ISTA+. in after enter "enter battery exchange in the same capacity", then ask is the newly installed battery original BMW parts, since I bought from BMW dealer, I said Yes,and then asked me input 12 digital data matrix, so I typed the 12 digits, and then give me the error: Error in testmodule: ABL_WAR_AS6120_WECHEL, and the only option is detail and ok, so I click detail as below:

System.Exception: Failed to invoke service program. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ToInt32(String value)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.Start(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.run(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.ISTAModule.callModuleRef (String refPath, ParameterContainer InParameters, ParameterContainer& OutParameters, ParameterContainer& InAndOutParameters)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_04_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.D ataMatrixCode()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_03_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A uswahl_01_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A G6100_AEP0()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.S tart(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.r un(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.DoInvoke()
--- End of inner exception stack trace ---
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.Invoke()
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.In vokeRunMethod(MethodInfo run, Object[] param)
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.do It()

click OK let me go back to battery exchange again.

any advice?

Thanks

Frank

Just press no when it says if it's a bmw battery.

frank944 · 02-07-2020, 12:06 AM

i tried that too, same error, wonder do I change from windows 10 to windows 7?

Thanks

Frank

frank944 · 02-07-2020, 01:13 PM

i am still have issue with register battery with ISTA+, After I installed the battery, when I am trying to use ISTA+. in after enter "enter battery exchange in the same capacity", then ask is the newly installed battery original BMW parts, since I bought from BMW dealer, I said Yes,and then asked me input 12 digital data matrix, so I typed the 12 digits, and then give me the error: Error in testmodule: ABL_WAR_AS6120_WECHEL, and the only option is detail and ok, so I click detail as below:

System.Exception: Failed to invoke service program. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ToInt32(String value)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.Start(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.run(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.ISTAModule.callModuleRef (String refPath, ParameterContainer InParameters, ParameterContainer& OutParameters, ParameterContainer& InAndOutParameters)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_04_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.D ataMatrixCode()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_03_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A uswahl_01_s()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A G6100_AEP0()
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.S tart(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.r un(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.DoInvoke()
--- End of inner exception stack trace ---
at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.Invoke()
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.In vokeRunMethod(MethodInfo run, Object[] param)
at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.do It()

click OK let me go back to battery exchange again.

is that something with the software or my ether cable? or Win10 laptop?

Thanks

Frank

ctuna · 02-07-2020, 01:29 PM

Might be easier to use Inpa or Tool32 .
It's better to get Inpa up and running and may be essential
depending on whose install you use.
Bimmergeek.net install requires Inpa(standard tools suite be
running first. )
Most PC problems are due to not having the complete set of
Microsoft C++ executable s installed or not having netframework 4.7
or better. Which operating system (windows 7 or 10 is not the issue)
Windows 10 comes with more stuff installed defacto than Win 7.

When I start seeing method error's it suggests that all the
C++ excutables are not installed.

https://www.e90post.com/forums/showthread.php?t=1581663

Also since this thread was started to give a library of software
it's not really a good place to ask questions about how to get it working I think.

frank944 · 02-07-2020, 02:01 PM

i don't think it support 2012 bmw 528i xdrive (F10) , I did install inpa and tool32 from Bimmergeek.net, and then install ISTA, guess may be conflict to each other...

sdbmwcoding · 02-07-2020, 02:23 PM

Quote:

Originally Posted by frank944

i don't think it support 2012 bmw 528i xdrive (F10) , I did install inpa and tool32 from Bimmergeek.net, and then install ISTA, guess may be conflict to each other...

It's probably best you find someone to remotely do the job for you. Unfortunately we cannot walk you through every single little detail, it would take too long to figure out where the problem lies. Last thing to check us ista vehicle interface. Make sure it's set to enet

frank944 · 02-07-2020, 11:25 PM

Here is the update:

After read car information, there some icons showed brown and then got error: "the programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA . If problems persists. Contact local support "

therefore I continue to select Vehicle management/service function//body/voltage supply/battery/register battery replacement, instead of Answer Yes to "is the newly installed battery an original BMW parts?", because I thought I bought a brand new BMW battery from BMW dealer, so it is an original BMW parts, is that right?

tonight, I select No, and then everything was successfully registered.

Bikie81 · 02-16-2020, 08:05 AM

Thank you so much, this has to the best collection of BMW software\information on the web

Hary09 · 02-29-2020, 02:20 PM

Quote:

Originally Posted by J0K3R5

Added a working INPA that works on e90 N47 engines with no errors.

https://1drv.ms/u/s!ApTXN2OB77W_iZcf..._t3vg?e=E3RYRc

hi can i please have a link for bmw e90 or e89 inpa / ISTA link please

Many Thanks in Advance

J0K3R5 · 02-29-2020, 07:30 PM

Quote:

Originally Posted by Hary09

hi can i please have a link for bmw e90 or e89 inpa / ISTA link please

Many Thanks in Advance

https://mega.nz/#F!9wZxBaaB!ljV4BpL11qE-ClaYTth2UQ

02-02-2020, 11:13 PM	#24
eugenecp Private 19 Rep 77 Posts Drives: 2009 BMW 328i Convertible Join Date: Aug 2019 Location: TX iTrader: (0) Garage List 2007 Toyota Sienna [0.00] 2004 VW Touareg V8 [0.00]	Thanks for the collection.
	Appreciate 0 Quote

02-06-2020, 07:29 PM	#28
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	Good Evening, I got the battery and Ether Cable, now I just have final question about the ISTA software on laptop, how can I know the software or the cable are working, software can open, and got to the register battery exchange screen, I just want make sure the software and cable are working and then ready to remove my old battery. Please Advice Thanks Frank
	Appreciate 0 Quote

02-06-2020, 08:04 PM	#30
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	i can use software and connect with the cable, is there anyway can verify see the cable is working? Thanks Frank
	Appreciate 0 Quote

02-06-2020, 08:25 PM	#32
ctuna Lieutenant General 2040 Rep 13,352 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Get Standard tools installed . Go to Inpa run Functional jobs f2 and f3 .
	Appreciate 0 Quote

02-06-2020, 11:34 PM	#33
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	I losted tonight. sorry guys.... Last edited by frank944; 02-06-2020 at 11:45 PM..
	Appreciate 0 Quote

02-06-2020, 11:44 PM	#34
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	after installed the battery, when I am trying to use ISTA+. in after enter "enter battery exchange in the same capacity", then ask is the newly installed battery original BMW parts, since I bought from BMW dealer, I said Yes,and then asked me input 12 digital data matrix, so I typed the 12 digits, and then give me the error: Error in testmodule: ABL_WAR_AS6120_WECHEL, and the only option is detail and ok, so I click detail as below: System.Exception: Failed to invoke service program. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format. at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) at System.Convert.ToInt32(String value) at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.Start(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.run(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) --- End of inner exception stack trace --- at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at BMW.Rheingold.Module.ISTA.ISTAModule.callModuleRef (String refPath, ParameterContainer InParameters, ParameterContainer& OutParameters, ParameterContainer& InAndOutParameters) at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_04_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.D ataMatrixCode() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_03_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A uswahl_01_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A G6100_AEP0() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.S tart(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.r un(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) --- End of inner exception stack trace --- at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.DoInvoke() --- End of inner exception stack trace --- at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.Invoke() at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.In vokeRunMethod(MethodInfo run, Object[] param) at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.do It() click OK let me go back to battery exchange again. any advice? Thanks Frank
	Appreciate 0 Quote

02-07-2020, 12:06 AM	#36
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	i tried that too, same error, wonder do I change from windows 10 to windows 7? Thanks Frank
	Appreciate 0 Quote

02-07-2020, 01:13 PM	#37
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	i am still have issue with register battery with ISTA+, After I installed the battery, when I am trying to use ISTA+. in after enter "enter battery exchange in the same capacity", then ask is the newly installed battery original BMW parts, since I bought from BMW dealer, I said Yes,and then asked me input 12 digital data matrix, so I typed the 12 digits, and then give me the error: Error in testmodule: ABL_WAR_AS6120_WECHEL, and the only option is detail and ok, so I click detail as below: System.Exception: Failed to invoke service program. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format. at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) at System.Convert.ToInt32(String value) at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.Start(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) at BMW.Rheingold.Module.ISTA.ABL_GEN_AG9999_TYP_TYPME RKMALE.run(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) --- End of inner exception stack trace --- at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at BMW.Rheingold.Module.ISTA.ISTAModule.callModuleRef (String refPath, ParameterContainer InParameters, ParameterContainer& OutParameters, ParameterContainer& InAndOutParameters) at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_04_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.D ataMatrixCode() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.R egistrieren_03_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A uswahl_01_s() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.A G6100_AEP0() at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.S tart(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) at BMW.Rheingold.Module.ISTA.ABL_WAR_AS6120_WECHSEL.r un(ParameterContainer InParameter, ParameterContainer& OutParameter, ParameterContainer& InAndOutParameter) --- End of inner exception stack trace --- at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeIn ternal(Object obj, Object[] parameters, Object[] arguments) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.DoInvoke() --- End of inner exception stack trace --- at BMW.Rheingold.Module.ISTA.IstaServiceProgramInvoke r.Invoke() at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.In vokeRunMethod(MethodInfo run, Object[] param) at BMW.Rheingold.Module.ISTA.ModuleBootstrapLoader.do It() click OK let me go back to battery exchange again. is that something with the software or my ether cable? or Win10 laptop? Thanks Frank
	Appreciate 0 Quote

02-07-2020, 01:29 PM	#38
ctuna Lieutenant General 2040 Rep 13,352 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Might be easier to use Inpa or Tool32 . It's better to get Inpa up and running and may be essential depending on whose install you use. Bimmergeek.net install requires Inpa(standard tools suite be running first. ) Most PC problems are due to not having the complete set of Microsoft C++ executable s installed or not having netframework 4.7 or better. Which operating system (windows 7 or 10 is not the issue) Windows 10 comes with more stuff installed defacto than Win 7. When I start seeing method error's it suggests that all the C++ excutables are not installed. https://www.e90post.com/forums/showthread.php?t=1581663 Also since this thread was started to give a library of software it's not really a good place to ask questions about how to get it working I think. Last edited by ctuna; 02-07-2020 at 01:37 PM..
	Appreciate 0 Quote

02-07-2020, 02:01 PM	#39
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	i don't think it support 2012 bmw 528i xdrive (F10) , I did install inpa and tool32 from Bimmergeek.net, and then install ISTA, guess may be conflict to each other...
	Appreciate 0 Quote

02-07-2020, 11:25 PM	#41
frank944 frank944 7 Rep 42 Posts Drives: 2012 BMW 528i Xdrive Join Date: Sep 2012 Location: IL iTrader: (0)	Here is the update: After read car information, there some icons showed brown and then got error: "the programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA . If problems persists. Contact local support " therefore I continue to select Vehicle management/service function//body/voltage supply/battery/register battery replacement, instead of Answer Yes to "is the newly installed battery an original BMW parts?", because I thought I bought a brand new BMW battery from BMW dealer, so it is an original BMW parts, is that right? tonight, I select No, and then everything was successfully registered.
	Appreciate 0 Quote

02-16-2020, 08:05 AM	#42
Bikie81 Registered 0 Rep 2 Posts Drives: BMW E90 2008 320i Join Date: Feb 2020 Location: Brisbane iTrader: (0)	Thank you so much, this has to the best collection of BMW software\information on the web
	Appreciate 0 Quote