Walnut blasting central NJ

ritchwell · 09-28-2015, 07:08 PM

Quote:

Originally Posted by N54CherryHill

I am planing to go to him in couple days to do walnut blasting with full diagnostic check. I searched him b4 I pull the trigger. He answered all my questions very friendly and professional. I will let everyone know how that goes. Btw he is not a backyard mechanic shop is huge and insured..

I'm sure everything will work out he has an extensive portfolio in bmw repair and bmw performance

Tyspeed · 10-12-2015, 04:33 PM

Extremely modern D.I. (direct injection) engines like the N54, N55, and S55 engines are found in many BMW's today. Direct Injection has many benefits for fuel economy, and overall engine efficiency, it is a pretty sophisticated technology. There is one downside, and that is, the injectors are mounted so that they fire directly into the combustion chamber. Commonly, fuel is injected into the intake manifold, upstream of the intake valves. The effect of fuel, with detergents, spraying on the valves cleans them. On a direct injection engine, this process does not occur, and so it allows oil, from both the CCV system and turbocharger blow-by to build up in a "cake" on the intake valves, reducing efficiency and choking the engine of power. *think clogged up*. By 60-80,000 miles, it really causes rough running and a reduction of power and efficiency.

Luckily, a process has been developed to clean the intake valves, using a media blaster and softened walnut shell grits. Using an air powered gun, a technician can "blast" the closed intake valves clean with this media, thus restoring power back to the engine. It Is a slightly involved process, but worth every penny....

Abax335 · 10-13-2015, 10:13 PM

For those who still fall under CPO BMW has been covering these at least for the n54. Done one last week and started one before I left today

TrAcK TRaP · 10-16-2015, 08:19 PM

Quote:

Originally Posted by Tyspeed

Extremely modern D.I. (direct injection) engines like the N54, N55, and S55 engines are found in many BMW's today. Direct Injection has many benefits for fuel economy, and overall engine efficiency, it is a pretty sophisticated technology. There is one downside, and that is, the injectors are mounted so that they fire directly into the combustion chamber. Commonly, fuel is injected into the intake manifold, upstream of the intake valves. The effect of fuel, with detergents, spraying on the valves cleans them. On a direct injection engine, this process does not occur, and so it allows oil, from both the CCV system and turbocharger blow-by to build up in a "cake" on the intake valves, reducing efficiency and choking the engine of power. *think clogged up*. By 60-80,000 miles, it really causes rough running and a reduction of power and efficiency.

Luckily, a process has been developed to clean the intake valves, using a media blaster and softened walnut shell grits. Using an air powered gun, a technician can "blast" the closed intake valves clean with this media, thus restoring power back to the engine. It Is a slightly involved process, but worth every penny....

Thanks again car feels great what a huge difference.. ERMAN..

TrAcK TRaP · 10-16-2015, 08:23 PM

Don't wait unlock the power

Highly recommended. What a great and friendly guy..

ritchwell · 10-16-2015, 08:26 PM

Quote:

Originally Posted by N54CherryHill

Don't wait unlock the power

Highly recommended. What a great and friendly guy..

Im glad he was able to get it done for you

TrAcK TRaP · 10-16-2015, 08:29 PM

Quote:

Originally Posted by ritchwell

Im glad he was able to get it done for you

Tyspeed · 10-20-2015, 07:17 AM

Glad you were happy with the results! Walnut blasting really makes a difference you can feel!!! N54CherryHill

ritchwell · 10-26-2015, 08:46 AM

Just bumping the thread up

TrAcK TRaP · 10-26-2015, 07:51 PM

Ones again you won't be disappointed. Call your gf while Tyler works on your car turn back and your car will be done. He is that quick

Tyspeed · 10-28-2015, 04:28 PM

Quote:

Originally Posted by N54CherryHill

Ones again you won't be disappointed. Call your gf while Tyler works on your car turn back and your car will be done. He is that quick

too funny, guess it depends on how patient you are!

Don't know what everyone is waiting for though really... what am I going to do will all these boxes of walnuts now?

logicc · 10-29-2015, 01:38 AM

Possibly planning on getting this done on my car soon. So does this guy have an actual shop or what?

ritchwell · 10-29-2015, 05:25 AM

Quote:

Originally Posted by logicc

Possibly planning on getting this done on my car soon. So does this guy have an actual shop or what?

Yes he does will pm you the info

TrAcK TRaP · 10-30-2015, 07:35 PM

Quote:

Originally Posted by logicc

Possibly planning on getting this done on my car soon. So does this guy have an actual shop or what?

go go go don't wait

ritchwell · 01-15-2016, 07:41 PM

Just want to bump this thread who will be interested in a walnut blasting in central nj area. Pm me for more info

kamfa39 · 01-18-2016, 05:03 PM

What's the cost-
I heard and read doesnt really help n55????

E90NJ · 01-19-2016, 10:19 AM

Quote:

Originally Posted by ritchwell

Hey guys I'm planning to get my car walnut blasted, I know someone that does walnut blasting in central NJ for a good price. If you guys are interested pm me.

does the N52 usually require walnut blasting? I would assume no or at higher mileage due to no turbo.

amar.p86 · 02-15-2016, 03:53 PM

Please contact me I live in central nj and need walnut plus other minor maintanence , trying to keep total cost low.

e_nice1803 · 02-16-2016, 10:24 AM

Can you please pmd me the info thanks ?

induscyka · 02-19-2016, 07:43 PM

pm me price too and where in central jersey

ritchwell · 02-19-2016, 07:48 PM

Pmed forum members

Quiet Money · 03-14-2016, 12:52 PM

Can you pm me this "secret" shop I do? Lol thanks. I'm in NYC but I travel to philly often so maybe I'll stop by on my next trip if the cost is nice.

10-12-2015, 04:33 PM	#24
Tyspeed Registered 9 Rep 3 Posts Drives: 1976 2800CS Join Date: Oct 2015 Location: Central New Jersey iTrader: (0)	Extremely modern D.I. (direct injection) engines like the N54, N55, and S55 engines are found in many BMW's today. Direct Injection has many benefits for fuel economy, and overall engine efficiency, it is a pretty sophisticated technology. There is one downside, and that is, the injectors are mounted so that they fire directly into the combustion chamber. Commonly, fuel is injected into the intake manifold, upstream of the intake valves. The effect of fuel, with detergents, spraying on the valves cleans them. On a direct injection engine, this process does not occur, and so it allows oil, from both the CCV system and turbocharger blow-by to build up in a "cake" on the intake valves, reducing efficiency and choking the engine of power. think clogged up. By 60-80,000 miles, it really causes rough running and a reduction of power and efficiency. Luckily, a process has been developed to clean the intake valves, using a media blaster and softened walnut shell grits. Using an air powered gun, a technician can "blast" the closed intake valves clean with this media, thus restoring power back to the engine. It Is a slightly involved process, but worth every penny....
	Appreciate 1 Quote

10-13-2015, 10:13 PM	#25
Abax335 Lieutenant 81 Rep 540 Posts Drives: 2008 BMW 335xi 6spd Join Date: Oct 2015 Location: Orange/Rockland iTrader: (1)	For those who still fall under CPO BMW has been covering these at least for the n54. Done one last week and started one before I left today
	Appreciate 0 Quote

10-16-2015, 08:23 PM	#27
TrAcK TRaP bOrN To DiE 414 Rep 1,736 Posts Drives: 2011 E92 M3 ZCP Join Date: Apr 2013 Location: South Jersey iTrader: (0)	Don't wait unlock the power Highly recommended. What a great and friendly guy..
	Appreciate 0 Quote

10-20-2015, 07:17 AM	#30
Tyspeed Registered 9 Rep 3 Posts Drives: 1976 2800CS Join Date: Oct 2015 Location: Central New Jersey iTrader: (0)	Glad you were happy with the results! Walnut blasting really makes a difference you can feel!!! N54CherryHill
	Appreciate 0 Quote

10-26-2015, 08:46 AM	#31
ritchwell First Lieutenant 64 Rep 341 Posts Drives: 2011 BMW 335i xdrive sedan Join Date: Sep 2013 Location: Central NJ iTrader: (18)	Just bumping the thread up
	Appreciate 0 Quote

10-26-2015, 07:51 PM	#32
TrAcK TRaP bOrN To DiE 414 Rep 1,736 Posts Drives: 2011 E92 M3 ZCP Join Date: Apr 2013 Location: South Jersey iTrader: (0)	Ones again you won't be disappointed. Call your gf while Tyler works on your car turn back and your car will be done. He is that quick
	Appreciate 0 Quote

10-29-2015, 01:38 AM	#34
logicc New Member 7 Rep 25 Posts Drives: 08 E92 335i Join Date: Sep 2015 Location: NJ iTrader: (0)	Possibly planning on getting this done on my car soon. So does this guy have an actual shop or what?
	Appreciate 0 Quote

01-15-2016, 07:41 PM	#37
ritchwell First Lieutenant 64 Rep 341 Posts Drives: 2011 BMW 335i xdrive sedan Join Date: Sep 2013 Location: Central NJ iTrader: (18)	Just want to bump this thread who will be interested in a walnut blasting in central nj area. Pm me for more info
	Appreciate 0 Quote

01-18-2016, 05:03 PM	#38
kamfa39 Private First Class 18 Rep 114 Posts Drives: 2011 335xi Black Sapphire Join Date: Nov 2013 Location: Jersey shore iTrader: (0)	What's the cost- I heard and read doesnt really help n55???? __________________ Cobb protune By lou at procom racing, nj~Pure turbo stage 2~ GFB DV upgrade~Cobb FMIC~Cobb DP~ER charge pipe~Billy Boat Exhaust~H&R Sport Springs
	Appreciate 0 Quote

02-15-2016, 03:53 PM	#40
amar.p86 Registered 0 Rep 4 Posts Drives: 2008 335i 6MT Join Date: Apr 2015 Location: Central NJ - Middlesex iTrader: (0)	Please contact me I live in central nj and need walnut plus other minor maintanence , trying to keep total cost low.
	Appreciate 0 Quote

02-16-2016, 10:24 AM	#41
e_nice1803 New Member 10 Rep 9 Posts Drives: 09 335i xdrive Join Date: May 2012 Location: NJ iTrader: (0)	Can you please pmd me the info thanks ?
	Appreciate 0 Quote

02-19-2016, 07:43 PM	#42
induscyka Private First Class 16 Rep 116 Posts Drives: 335 Join Date: Dec 2013 Location: here iTrader: (0)	pm me price too and where in central jersey
	Appreciate 0 Quote

02-19-2016, 07:48 PM	#43
ritchwell First Lieutenant 64 Rep 341 Posts Drives: 2011 BMW 335i xdrive sedan Join Date: Sep 2013 Location: Central NJ iTrader: (18)	Pmed forum members
	Appreciate 0 Quote

03-14-2016, 12:52 PM	#44
Quiet Money Private First Class 7 Rep 135 Posts Drives: E92 Pre LCI 335i TiAg Join Date: Nov 2010 Location: Brooklyn, NYC iTrader: (0)	Can you pm me this "secret" shop I do? Lol thanks. I'm in NYC but I travel to philly often so maybe I'll stop by on my next trip if the cost is nice.
	Appreciate 0 Quote