Hexon RR600's arrived and installed!

Grand_hustle17 · 01-14-2016, 07:01 AM

Quote:

Originally Posted by Thacuda

They make a "Stage 1" version as well.

Are those stock replacements or upgrade?. I was looking at the hybrid 1 for $1500

Thacuda · 01-14-2016, 08:28 AM

I'd contact Wayne about them, but from what I understand They are a slight improvement over stock. (Wheel size )

Sean978 · 01-14-2016, 10:54 AM

My RR600 kit is installed and I picked her up day before yesterday from having PR inlets installed. I'm going on the dyno on the 20th and again the 27th after I get a wedge pump flash. Keep us Posted!

Kienvu14 · 01-14-2016, 01:31 PM

Quote:

Originally Posted by Sean978

My RR600 kit is installed and I picked her up day before yesterday from having PR inlets installed. I'm going on the dyno on the 20th and again the 27th after I get a wedge pump flash. Keep us Posted!

You might beat me to it! I'm barely on the baseman and last time took me 17 revisions = roughly 17 days haha

Rmilam · 01-26-2016, 09:40 PM

Good deal Kien! I remember you were having issues with VTT glad you got it sorted out. I'm thinking of getting these with my tax return. Still enjoying them I assume?

NA55 · 01-26-2016, 09:48 PM

Quote:

Originally Posted by Sean978

My RR600 kit is installed and I picked her up day before yesterday from having PR inlets installed. I'm going on the dyno on the 20th and again the 27th after I get a wedge pump flash. Keep us Posted!

Any updates on dyno numbers?

Kienvu14 · 01-26-2016, 11:21 PM

Quote:

Originally Posted by Rmilam

Good deal Kien! I remember you were having issues with VTT glad you got it sorted out. I'm thinking of getting these with my tax return. Still enjoying them I assume?

So far so good! Wayne will take care of you if you decide to go turbos with tax refund! I'm currently on revision 10 and close to being done before I can get in on a dyno

Thacuda · 01-27-2016, 11:24 AM

Holy smokes that's a lot of flashing. Still waiting on my 600's

f3adm · 01-27-2016, 11:51 AM

Still waiting on mine too, ordered 4th December

Whathedunks · 01-27-2016, 02:24 PM

Very close to purchasing a set of these. Although I wouldn't mind going single incase I itch for more power down the road.. Decisions, decisions lol

Thacuda · 01-27-2016, 02:27 PM

Who all has received their RR600s?

RSL · 01-27-2016, 03:05 PM

I did, showed up last week, still sitting in the box. Waiting for the install kit that was shipped separately.

Thacuda · 01-27-2016, 03:34 PM

Are people still waiting from the Black Friday Sale?

puppydax · 01-27-2016, 03:39 PM

I don't want to jynx myself, but I am looking forward to doing a turbo upgrade. I have 83k on my OE turbos and they're surprisingly still working fine. VERY minimal rattle, most of it is the actuator rod.

These look awesome, thanks for the HQ pics.

Welterweight · 01-27-2016, 07:58 PM

I received mine last week!

Grand_hustle17 · 01-27-2016, 08:26 PM

Dyno???....

BQTuning · 01-27-2016, 08:36 PM

Quote:

Originally Posted by Grand_hustle17

Dyno???....

I'm almost done with his tune, just being picky.

Grand_hustle17 · 01-27-2016, 08:52 PM

Quote:

Originally Posted by BuraQ

I'm almost done with his tune, just being picky.

Staaaaaaaahp teasing meeeeee!!!!! Beee done!!!

... Err ma gerd i wanna see so baaad! Lol

Whit45 · 01-27-2016, 09:25 PM

Ordered mine in December with the special pricing, but opted to go with the ceramic coating, which has held up delivery. Wayne has kept me informed along the way. Should have them this week.

ritzzzzzwik · 01-27-2016, 11:54 PM

Congratulations OP! Especially after your bitter experience with VTT.
Keeps us posted on the progress and longevity of these units. I may do these as well if these turn out good.

Thacuda · 01-28-2016, 01:52 PM

So my eta changed, delayed a bit.

windymissile · 01-28-2016, 01:59 PM

Have you spoken with Wayne? I know hexon build in batches so maybe you slipped into the next one.
I agreed on a 4 week lead time and don't have time for that to slip.

WM

01-14-2016, 08:28 AM	#24
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	I'd contact Wayne about them, but from what I understand They are a slight improvement over stock. (Wheel size )
	Appreciate 0 Quote

01-14-2016, 10:54 AM	#25
Sean978 Private First Class 35 Rep 120 Posts Drives: 2007 335i 6MT SGM Join Date: Jan 2014 Location: Nashua, NH iTrader: (0)	My RR600 kit is installed and I picked her up day before yesterday from having PR inlets installed. I'm going on the dyno on the 20th and again the 27th after I get a wedge pump flash. Keep us Posted!
	Appreciate 0 Quote

01-26-2016, 09:40 PM	#27
Rmilam Registered 0 Rep 4 Posts Drives: 2009 BMW 335XI Join Date: Oct 2015 Location: Colorado iTrader: (0)	Good deal Kien! I remember you were having issues with VTT glad you got it sorted out. I'm thinking of getting these with my tax return. Still enjoying them I assume?
	Appreciate 0 Quote

01-27-2016, 11:24 AM	#30
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	Holy smokes that's a lot of flashing. Still waiting on my 600's
	Appreciate 0 Quote

01-27-2016, 11:51 AM	#31
f3adm Second Lieutenant 38 Rep 261 Posts Drives: E92 335i Sapphire Black Join Date: Oct 2014 Location: North West UK iTrader: (0)	Still waiting on mine too, ordered 4th December
	Appreciate 0 Quote

01-27-2016, 02:24 PM	#32
Whathedunks Second Lieutenant 23 Rep 294 Posts Drives: 335i Join Date: Sep 2009 Location: South iTrader: (2)	Very close to purchasing a set of these. Although I wouldn't mind going single incase I itch for more power down the road.. Decisions, decisions lol
	Appreciate 0 Quote

01-27-2016, 02:27 PM	#33
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	Who all has received their RR600s?
	Appreciate 0 Quote

01-27-2016, 03:05 PM	#34
RSL Captain 650 Rep 779 Posts Drives: E92 ///M3 (Retired) / 335is Join Date: Mar 2012 Location: USA iTrader: (6)	I did, showed up last week, still sitting in the box. Waiting for the install kit that was shipped separately.
	Appreciate 0 Quote

01-27-2016, 03:34 PM	#35
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	Are people still waiting from the Black Friday Sale? Last edited by Thacuda; 01-28-2016 at 06:58 PM..
	Appreciate 0 Quote

01-27-2016, 03:39 PM	#36
puppydax Lieutenant 272 Rep 532 Posts Drives: '25 Portimao M2 Join Date: Nov 2013 Location: Roseville, CA iTrader: (4)	I don't want to jynx myself, but I am looking forward to doing a turbo upgrade. I have 83k on my OE turbos and they're surprisingly still working fine. VERY minimal rattle, most of it is the actuator rod. These look awesome, thanks for the HQ pics. __________________ https://www.instagram.com/puppydax/ Previous: 2007 E90 335i \| 2008 E92 335i \| 2009 E82 135i Current: '25 ///M2 Portimao Blue
	Appreciate 0 Quote

01-27-2016, 07:58 PM	#37
Welterweight Major 100 Rep 1,337 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	I received mine last week!
	Appreciate 0 Quote

01-27-2016, 08:26 PM	#38
Grand_hustle17 Major 194 Rep 1,173 Posts Drives: E90 335i Join Date: Aug 2015 Location: Maryland iTrader: (0)	Dyno???....
	Appreciate 0 Quote

01-27-2016, 09:25 PM	#41
Whit45 Second Lieutenant 40 Rep 228 Posts Drives: '08 E90 335i/'10 E92 M3/'13 Is Join Date: Apr 2014 Location: NC The curvy side iTrader: (0)	Ordered mine in December with the special pricing, but opted to go with the ceramic coating, which has held up delivery. Wayne has kept me informed along the way. Should have them this week.
	Appreciate 0 Quote

01-27-2016, 11:54 PM	#42
ritzzzzzwik Captain 234 Rep 723 Posts Drives: SO M4 MT Join Date: Oct 2014 Location: NOVA iTrader: (0)	Congratulations OP! Especially after your bitter experience with VTT. Keeps us posted on the progress and longevity of these units. I may do these as well if these turn out good.
	Appreciate 0 Quote

01-28-2016, 01:52 PM	#43
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	So my eta changed, delayed a bit. Last edited by Thacuda; 01-28-2016 at 06:58 PM..
	Appreciate 0 Quote

01-28-2016, 01:59 PM	#44
windymissile Major 67 Rep 1,431 Posts Drives: 335i M Sport Join Date: Apr 2013 Location: UK iTrader: (0)	Have you spoken with Wayne? I know hexon build in batches so maybe you slipped into the next one. I agreed on a 4 week lead time and don't have time for that to slip. WM
	Appreciate 0 Quote