[ctuna]

If its intermittent and caused by the shock or going over bumps
try to recreated the condition for individual modules.
Wiggle wires/harness or tap or shake the suspect items while playing
something through the system.

[j.f.leonard]

Originally Posted by ctuna

If its intermittent and caused by the shock or going over bumps
try to recreated the condition for individual modules.
Wiggle wires/harness or tap or shake the suspect items while playing
something through the system.

Ill try that tomorrow and see what happens. I know its nothing in the door because if i slam the door while playing music it doesnt change anything. Will keep the forum posted

[j.f.leonard]

So I dug a little deeper and wiggled each wire attached to my technic harness and it seems theres a bad connection with my remote wires. There may be a bad connection to my front door as well so I guess the next step will be to go through and redo each connection.

[j.f.leonard]

Ive completely redone the remote wire because when I wiggled it the entire system would cut off and the speakers still aren't working so I know the remote wire is not related. Next step will be redoing the wire connections at the technic harness.

[j.f.leonard]

Replaced the power and ground wires and it didnt fix anything. What could it be...?

Edit: i meant the power and ground wires to from the technic harness to the amp (just incase there was confusion)

[j.f.leonard]

Turns out it was yet another problem with my technic 676 harness. First the relay caused issues when I installed the 400/4 and now 10 months later the RCA connectors seem to be cheaply made as the metal tip broke off the connector. A pic is attached