Parrot Mki9100

TommyLights · 10-15-2010, 09:16 PM

^^Thanks for the info. Do you remember which of the Canbus wires is Hi, and Low?

DAN · 10-16-2010, 04:56 AM

On my photo of the canbus wires the one on the left is can low and on the right is can high. Not sure if all brands of harness have the same colours though... Look at one of the links in my last post - the PDF files show exactly where on the plugs the required pin numbers are, then you can follow back to the wires & tap into them...

TommyLights · 10-16-2010, 06:27 PM

Great......I have everything installed thanks to your guidance, but have one remaining problem. I used pin 9 for the Can high and Pin 11 for the Can Low.

BUT I dont have the mute lead connected to anything (pin 10 on my harness is empty, so I could not tap into it). Should I run the yellow mute in there?

If not, I will have to ask around because I need the yellow mute wire from the MKi to get the steering wheel interface to work - the manual says the steering wheel controls will default to radio mode if the mute is not activated by the Parrot.

Maybe you can show where the SOT harness is located??

DAN · 10-16-2010, 07:45 PM

You mean there is no cable leading from pin 10 on your sot-976 harness/lead at all?? That's odd - mine even had an in-line push-pull break connector in it so the parrot mute lead just pushed in... Do you definitely have the correct harness?? Does pin 10 on the connector at least have a pin on it that makes contact with the back of the radio? If so, I suppose you could solder your own cable on. If not, that could be a tricky problem to get around couldn't it....

TommyLights · 10-16-2010, 11:18 PM

^^^No, no cable leading in. It looks identical to your harness, but it is missing all of the speaker wires you have, and also the mute wire in. But it does have the pin, so I will try to solder the mute directly in. Since you have a fiber optic in like mine, I figure the wiring should be similar, I'll find out.

The mute button on mine happens to have a clip on it that will probably fit right over the pin, so I will try that tomorrow. Now, time to go out wife wifey tonite, so Ill post tomorrow on the results!

TommyLights · 10-17-2010, 03:19 PM

MUTE NOW WORKS WITH LOGIC 7!!!!

I had to solder a lead onto pin 10 and it worked like a charm. So for anyone that has Logic 7, you CAN tap into mute! Almost every response on the forum was a negative, so I am glad I did the necessary comparison and trial and error.

Last problem - the Unika interface seems to have accepted the Canbus protocols and the light changes color on the Unika interface when I touch a steering wheel button but the buttons still dont work. I think that's an issue I have to talk to Parrot directly about....and it doesnt look like its compatible with our cars from what I've been reading. Anyway, thanks for all the guidance Dan!

Edit: I needed a new screen, seems the old screens arent compatible with Unika and will not allow the Unika to function. Parrot sent me one free of charge within a few days, and now everything works perfectly. You can also do continuous updates to the Parrot via the USB line in.

DAN · 10-17-2010, 07:33 PM

That's ok, glad I was of some help. I can only suggest resetting the unika or updating software on the mki... The parrot forums might be of some use as well perhaps? Would be interested what you think about the unika controls when you get it working...

Out of interest, how did you route the parrot's speaker outputs all the way to the boot? Do you have fold-down back seats? I'm wanting to route a switched ignition feed to the boot for a gps tracker but it seems like a real pain. My seats don't fold down...

Dan

setzer715 · 10-20-2010, 12:22 PM

Hey DAN,
Thank you for the write up, I'm using to put a mki9200 in my wife's 07 328. Anyways, my question is, where did you get the new grill and speaker bracket for the center speaker? My car has idrive so I know the grill will be different but I was just wondering if you purchased online or at your local dealer/car shop. Thanks!

DAN · 10-20-2010, 04:16 PM

I just got the cowl with the speaker grill from a BMW dealer at the parts desk (had to wait a couple of days for it). The i-drive version is a slightly different shape I think (more curved).

On my car, there was already a place to drop the speaker into under the cowl. You could screw it into the holes provided but the weight of the speaker keeps it sat there just fine. I used a couple of blobs of blue-tac instead of screws - lazy, I know. I can't remember the speaker size, but I just measured the placeholder & bought the correct sized speaker from maplin (or radio shack in the US I guess). I don't know what it would be like on an i-drive model. The cover just pops off on mine with a bit of force upwards towards the windscreen at the edge nearest to the back of the car, so you could have a go yourself and see...

setzer715 · 10-20-2010, 09:04 PM

Thanks for the response! With a little more research i found out that that speaker is a 4" and the grill is different for iDrive (bought the car used, strange previous owner would invest in iDrive but not Bluetooth or iPod connections). I ordered the grill from getbmwparts.com for $25. Ordered the speaker from amazon.com (cheap 3.5" for $4) and got the mki9200 on ebay for $190. Will report back with pictures once everything arrives and I put it in!

setzer715 · 10-26-2010, 12:35 PM

Hey DAN, got another question for you. We're you able to pull both switched and constant power off the radio harness or did you have to run something to the fuse box? Thanks.

DAN · 10-27-2010, 06:15 PM

No, only the permanent 12v is on the harness.

I had to get the switched 12v feed from the fusebox. I wrapped a wire around a blade of the fuse that feeds the 12v cigarette lighter sockets, and shoved the fuse back in. If I could get hold of a proper fuse tap I'd have done that, but I can't seem to find them in the UK. That wire then leads straight to the parrot's labelled 12v ignition input on the in-line fuse.

setzer715 · 10-28-2010, 01:40 AM

Well, I got it all installed. Took me forever to figure out which setting sends audio over the line level instead of speaker outputs but now I only have audio on the right channel. Don't know if I did a poor soldering job or if the cable I used is just old and wore out. Troubleshoot that tomorrow.

Phone audio is as you said, perfectly adequate with the one speaker in the dash. Here are a few pics I took, not too many, sorry, was just trying to get it done.

First pic is of where I placed the Parrot. Took me a minute to figure out that with iDrive the Temp controls are ABOVE the Radio controls. Perfect place for the Parrot. Second Pic is of the Parrot with the Radio Back in. Third is the Mic (I know visor doesn't look best but sounds best). Fourth is the Display location. Fifth is the Aux In connector.

DAN · 10-30-2010, 12:37 PM

Here's where I put my mic - haven't really had any complaints from the other end...

TommyLights · 11-03-2010, 03:47 PM

[QUOTE=setzer715;8236009]Well, I got it all installed. Took me forever to figure out which setting sends audio over the line level instead of speaker outputs but now I only have audio on the right channel. Don't know if I did a poor soldering job or if the cable I used is just old and wore out. Troubleshoot that tomorrow.

[QUOTE=setzer715;8236009]

I believe you need to go into the audio settings and adjust so that muting is off when streaming music. Then you will be able to hear on the Aux line (full stereo) instead of the 1 speaker.

BTW Dan, completed the Unika install - everything works as advertised, and no complaints. I was even able to put away the controller!

DAN · 11-06-2010, 09:32 PM

Others have complained about the up & down controls on the unika being the opposite to the menu system on the parrot and that the volume changes the parrot AND the head unit at the same time. Have you found these problems at all?

setzer715 · 11-19-2010, 06:55 PM

[QUOTE=tomz_335i;8272457][QUOTE=setzer715;8236009]Well, I got it all installed. Took me forever to figure out which setting sends audio over the line level instead of speaker outputs but now I only have audio on the right channel. Don't know if I did a poor soldering job or if the cable I used is just old and wore out. Troubleshoot that tomorrow.

Quote:

Originally Posted by setzer715

I believe you need to go into the audio settings and adjust so that muting is off when streaming music. Then you will be able to hear on the Aux line (full stereo) instead of the 1 speaker.

BTW Dan, completed the Unika install - everything works as advertised, and no complaints. I was even able to put away the controller!

Thanks, it actually turned out to be a bad cable. Soldered in a new cable and bam, everything is working fine. Thanks for great write up Dan!

scubasteve2365 · 11-22-2010, 10:15 AM

Is the parrot Mki9100 capable of sending the voice-call out the aux line as well? I currently have an aftermarket bluetooth solution so I leave my radio on "Aux" 99% of the time, the only downside is that I have no way of integrating the factory steering wheel controls with it. I'm interested in the parrot with a unika but would rather not use the mute and simply direct both A2DP music and Voice calls out the aux line.

rogerdiaz · 03-04-2011, 08:40 AM

Do you see caller information displayed on bmw professional radio? Parrot plus unika

TommyLights · 03-04-2011, 01:27 PM

No. The Parrot does tell you the name of the person that is calling though, if they are stored in the phone book. Otherwise it just calls out the digits one by one.

TommyLights · 03-04-2011, 01:31 PM

Quote:

Originally Posted by DAN

That's ok, glad I was of some help. I can only suggest resetting the unika or updating software on the mki... The parrot forums might be of some use as well perhaps? Would be interested what you think about the unika controls when you get it working...

Out of interest, how did you route the parrot's speaker outputs all the way to the boot? Do you have fold-down back seats? I'm wanting to route a switched ignition feed to the boot for a gps tracker but it seems like a real pain. My seats don't fold down...

Dan

Yeah, I went into the trunk and routed the wires from the dash all the way back to the amp in the trunk. A bit of work but really the only way to do it right.

Hrato · 03-09-2012, 11:17 AM

Hello.
This is an old post, but i tough about try it anyway.
I have installed a Parrot Mki9100 plus Unika steering wheel adapter for BMW.
All installed with a Audio2Car harness.
All works ok, except for the fact that when the car goes to sleep, upon unlocking, one alarm comes up on car dash ( car being lifted up ), for about 3 seconds, and it disappears.
I have tried to have just the Parrot without the Unika, and the alarm goes away.
My car BMW e90, NO NAVI, with Professional CD.
As anyone had something like this, or knows what can cause this type of alarm?
Thanks.

10-15-2010, 09:16 PM	#23
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	^^Thanks for the info. Do you remember which of the Canbus wires is Hi, and Low?
	Appreciate 0 Quote

10-16-2010, 04:56 AM	#24
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	On my photo of the canbus wires the one on the left is can low and on the right is can high. Not sure if all brands of harness have the same colours though... Look at one of the links in my last post - the PDF files show exactly where on the plugs the required pin numbers are, then you can follow back to the wires & tap into them...
	Appreciate 0 Quote

10-16-2010, 06:27 PM	#25
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	Great......I have everything installed thanks to your guidance, but have one remaining problem. I used pin 9 for the Can high and Pin 11 for the Can Low. BUT I dont have the mute lead connected to anything (pin 10 on my harness is empty, so I could not tap into it). Should I run the yellow mute in there? If not, I will have to ask around because I need the yellow mute wire from the MKi to get the steering wheel interface to work - the manual says the steering wheel controls will default to radio mode if the mute is not activated by the Parrot. Maybe you can show where the SOT harness is located?? Last edited by TommyLights; 10-16-2010 at 06:41 PM..
	Appreciate 0 Quote

10-16-2010, 07:45 PM	#26
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	You mean there is no cable leading from pin 10 on your sot-976 harness/lead at all?? That's odd - mine even had an in-line push-pull break connector in it so the parrot mute lead just pushed in... Do you definitely have the correct harness?? Does pin 10 on the connector at least have a pin on it that makes contact with the back of the radio? If so, I suppose you could solder your own cable on. If not, that could be a tricky problem to get around couldn't it....
	Appreciate 0 Quote

10-16-2010, 11:18 PM	#27
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	^^^No, no cable leading in. It looks identical to your harness, but it is missing all of the speaker wires you have, and also the mute wire in. But it does have the pin, so I will try to solder the mute directly in. Since you have a fiber optic in like mine, I figure the wiring should be similar, I'll find out. The mute button on mine happens to have a clip on it that will probably fit right over the pin, so I will try that tomorrow. Now, time to go out wife wifey tonite, so Ill post tomorrow on the results!
	Appreciate 0 Quote

10-17-2010, 03:19 PM	#28
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	MUTE NOW WORKS WITH LOGIC 7!!!! I had to solder a lead onto pin 10 and it worked like a charm. So for anyone that has Logic 7, you CAN tap into mute! Almost every response on the forum was a negative, so I am glad I did the necessary comparison and trial and error. Last problem - the Unika interface seems to have accepted the Canbus protocols and the light changes color on the Unika interface when I touch a steering wheel button but the buttons still dont work. I think that's an issue I have to talk to Parrot directly about....and it doesnt look like its compatible with our cars from what I've been reading. Anyway, thanks for all the guidance Dan! Edit: I needed a new screen, seems the old screens arent compatible with Unika and will not allow the Unika to function. Parrot sent me one free of charge within a few days, and now everything works perfectly. You can also do continuous updates to the Parrot via the USB line in. Last edited by TommyLights; 03-04-2011 at 01:33 PM..
	Appreciate 0 Quote

10-17-2010, 07:33 PM	#29
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	That's ok, glad I was of some help. I can only suggest resetting the unika or updating software on the mki... The parrot forums might be of some use as well perhaps? Would be interested what you think about the unika controls when you get it working... Out of interest, how did you route the parrot's speaker outputs all the way to the boot? Do you have fold-down back seats? I'm wanting to route a switched ignition feed to the boot for a gps tracker but it seems like a real pain. My seats don't fold down... Dan Last edited by DAN; 10-18-2010 at 05:23 AM..
	Appreciate 0 Quote

10-20-2010, 12:22 PM	#30
setzer715 New Member 0 Rep 5 Posts Drives: 2011 X3 Join Date: Oct 2010 Location: Arizona, USA iTrader: (0)	Hey DAN, Thank you for the write up, I'm using to put a mki9200 in my wife's 07 328. Anyways, my question is, where did you get the new grill and speaker bracket for the center speaker? My car has idrive so I know the grill will be different but I was just wondering if you purchased online or at your local dealer/car shop. Thanks!
	Appreciate 0 Quote

10-20-2010, 04:16 PM	#31
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	I just got the cowl with the speaker grill from a BMW dealer at the parts desk (had to wait a couple of days for it). The i-drive version is a slightly different shape I think (more curved). On my car, there was already a place to drop the speaker into under the cowl. You could screw it into the holes provided but the weight of the speaker keeps it sat there just fine. I used a couple of blobs of blue-tac instead of screws - lazy, I know. I can't remember the speaker size, but I just measured the placeholder & bought the correct sized speaker from maplin (or radio shack in the US I guess). I don't know what it would be like on an i-drive model. The cover just pops off on mine with a bit of force upwards towards the windscreen at the edge nearest to the back of the car, so you could have a go yourself and see...
	Appreciate 0 Quote

10-20-2010, 09:04 PM	#32
setzer715 New Member 0 Rep 5 Posts Drives: 2011 X3 Join Date: Oct 2010 Location: Arizona, USA iTrader: (0)	Thanks for the response! With a little more research i found out that that speaker is a 4" and the grill is different for iDrive (bought the car used, strange previous owner would invest in iDrive but not Bluetooth or iPod connections). I ordered the grill from getbmwparts.com for $25. Ordered the speaker from amazon.com (cheap 3.5" for $4) and got the mki9200 on ebay for $190. Will report back with pictures once everything arrives and I put it in!
	Appreciate 0 Quote

10-26-2010, 12:35 PM	#33
setzer715 New Member 0 Rep 5 Posts Drives: 2011 X3 Join Date: Oct 2010 Location: Arizona, USA iTrader: (0)	Hey DAN, got another question for you. We're you able to pull both switched and constant power off the radio harness or did you have to run something to the fuse box? Thanks.
	Appreciate 0 Quote

10-27-2010, 06:15 PM	#34
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	No, only the permanent 12v is on the harness. I had to get the switched 12v feed from the fusebox. I wrapped a wire around a blade of the fuse that feeds the 12v cigarette lighter sockets, and shoved the fuse back in. If I could get hold of a proper fuse tap I'd have done that, but I can't seem to find them in the UK. That wire then leads straight to the parrot's labelled 12v ignition input on the in-line fuse.
	Appreciate 0 Quote

10-28-2010, 01:40 AM	#35
setzer715 New Member 0 Rep 5 Posts Drives: 2011 X3 Join Date: Oct 2010 Location: Arizona, USA iTrader: (0)	Well, I got it all installed. Took me forever to figure out which setting sends audio over the line level instead of speaker outputs but now I only have audio on the right channel. Don't know if I did a poor soldering job or if the cable I used is just old and wore out. Troubleshoot that tomorrow. Phone audio is as you said, perfectly adequate with the one speaker in the dash. Here are a few pics I took, not too many, sorry, was just trying to get it done. First pic is of where I placed the Parrot. Took me a minute to figure out that with iDrive the Temp controls are ABOVE the Radio controls. Perfect place for the Parrot. Second Pic is of the Parrot with the Radio Back in. Third is the Mic (I know visor doesn't look best but sounds best). Fourth is the Display location. Fifth is the Aux In connector. Last edited by setzer715; 10-28-2010 at 01:46 AM..
	Appreciate 0 Quote

10-30-2010, 12:37 PM	#36
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	Here's where I put my mic - haven't really had any complaints from the other end... Attached Images
	Appreciate 0 Quote

11-03-2010, 03:47 PM	#37
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	[QUOTE=setzer715;8236009]Well, I got it all installed. Took me forever to figure out which setting sends audio over the line level instead of speaker outputs but now I only have audio on the right channel. Don't know if I did a poor soldering job or if the cable I used is just old and wore out. Troubleshoot that tomorrow. [QUOTE=setzer715;8236009] I believe you need to go into the audio settings and adjust so that muting is off when streaming music. Then you will be able to hear on the Aux line (full stereo) instead of the 1 speaker. BTW Dan, completed the Unika install - everything works as advertised, and no complaints. I was even able to put away the controller!
	Appreciate 0 Quote

11-06-2010, 09:32 PM	#38
DAN Private First Class 18 Rep 135 Posts Drives: G20 320d M Portimao Blue Join Date: Oct 2008 Location: UK iTrader: (0)	Others have complained about the up & down controls on the unika being the opposite to the menu system on the parrot and that the volume changes the parrot AND the head unit at the same time. Have you found these problems at all? Last edited by DAN; 11-06-2010 at 09:40 PM..
	Appreciate 0 Quote

11-22-2010, 10:15 AM	#40
scubasteve2365 Private First Class 3 Rep 121 Posts Drives: 07 328xi Join Date: Jun 2010 Location: Louisville, Ky iTrader: (0)	Is the parrot Mki9100 capable of sending the voice-call out the aux line as well? I currently have an aftermarket bluetooth solution so I leave my radio on "Aux" 99% of the time, the only downside is that I have no way of integrating the factory steering wheel controls with it. I'm interested in the parrot with a unika but would rather not use the mute and simply direct both A2DP music and Voice calls out the aux line.
	Appreciate 0 Quote

03-04-2011, 08:40 AM	#41
rogerdiaz Captain 28 Rep 743 Posts Drives: 2015 335i Join Date: Sep 2010 Location: Raleigh, NC iTrader: (2)	Do you see caller information displayed on bmw professional radio? Parrot plus unika
	Appreciate 0 Quote

03-04-2011, 01:27 PM	#42
TommyLights Colonel 221 Rep 2,602 Posts Drives: Man Join Date: Jul 2010 iTrader: (12)	No. The Parrot does tell you the name of the person that is calling though, if they are stored in the phone book. Otherwise it just calls out the digits one by one.
	Appreciate 0 Quote

03-09-2012, 11:17 AM	#44
Hrato Private 2 Rep 51 Posts Drives: BMW 318d 2009 Join Date: Jul 2011 Location: Europe iTrader: (0)	Hello. This is an old post, but i tough about try it anyway. I have installed a Parrot Mki9100 plus Unika steering wheel adapter for BMW. All installed with a Audio2Car harness. All works ok, except for the fact that when the car goes to sleep, upon unlocking, one alarm comes up on car dash ( car being lifted up ), for about 3 seconds, and it disappears. I have tried to have just the Parrot without the Unika, and the alarm goes away. My car BMW e90, NO NAVI, with Professional CD. As anyone had something like this, or knows what can cause this type of alarm? Thanks.
	Appreciate 0 Quote