DDMtuning new HID kit non slim

MMAJNKE · 03-16-2010, 06:36 PM

i have ddm no error codes work great for me!

BRAISKI · 03-16-2010, 06:56 PM

Quote:

Originally Posted by second_2_nun

i have ddm no error codes work great for me!

Which one did you get the slim or the raptor?

jh7 · 03-17-2010, 02:02 AM

anyone try to use them for angel eyes?

MOTO69JOE · 03-17-2010, 09:33 AM

Anyone ventured to try these for headlights? Will they be reliable enough?

E92-Lighting · 03-17-2010, 12:37 PM

Quote:

Originally Posted by jh7

anyone try to use them for angel eyes?

wont work

BRAISKI · 03-17-2010, 04:14 PM

Quote:

Originally Posted by jh7

anyone try to use them for angel eyes?

I think I read somewhere here that someone did this. A lot better and cheaper than those "LED" angel eyes which cost AT LEAST double the price. Not to mention brighter!

I was going to order this before I will get my car but the 2011 e92 will already be LEDs.

Edit: Found the link

check next post

BRAISKI · 03-17-2010, 04:22 PM

Quote:

Originally Posted by E92-Lighting

wont work

Looks like it works

http://www.e90post.com/forums/showth...ight=DDM+angel

D@m!n!C@no · 03-17-2010, 06:41 PM

I was trying the DDM kit, but I think to make them work Pn'P you need 12v.The OEM AE output is about 5v?. I have the DDM kit slim with 10000uf cap in my fogs so they are not that bad!!

BMWjames · 03-17-2010, 11:01 PM

Quote:

Originally Posted by D@m!n!C@no

I was trying the DDM kit, but I think to make them work Pn'P you need 12v.The OEM AE output is about 5v?. I have the DDM kit slim with 10000uf cap in my fogs so they are not that bad!!

I'm a little confused then. How did everyone else get them to work if you need 12v but we only output 5v with the OEM.

D@m!n!C@no · 03-17-2010, 11:17 PM

Quote:

Originally Posted by BMWjames

I'm a little confused then. How did everyone else get them to work if you need 12v but we only output 5v with the OEM.

To be honest, I have no idea how they get them to work. I guess that either running an extra 12v from outside (headlight housing) or maybe a resistor to increase/decrease the output/input?

note:IDK how to make the DDm kit work Pn'P, others kit comes Pn'P ready.

Maybe someone can give some input here...

BMWjames · 03-17-2010, 11:22 PM

Quote:

Originally Posted by D@m!n!C@no

To be honest, I have no idea how they get them to work. I guess that either running an extra 12v from outside (headlight housing) or maybe a resistor to increase/decrease the output/input?

note:IDK how to make the DDm kit work Pn'P, others kit comes Pn'P ready.

Maybe someone can give some input here...

hmm.. which kits come pn'p? are they pn'p with no errors?

MusclezMarinara · 03-18-2010, 10:10 AM

Have that kit on my 335 they go out alot..fault codes for "fog lamp malfunction" any fixes?

E92-Lighting · 03-18-2010, 11:45 AM

06-07 e90 models will need a special harness

jonerik26 · 03-18-2010, 12:28 PM

Quote:

Originally Posted by cgtsx07

Does this kit come with mounting hardware?

double sided tape and a few zip ties

jonerik26 · 03-18-2010, 12:31 PM

Quote:

Originally Posted by XPO186

Cool, thanks for the tip... Did you use the sticky pads they included with the kit or did you use a bracket (and screws) of some kind?

i'd use the 3M double sided tape with the red backing and make sure to prepare the area with alcohol or something, I've had these ballast come off with the tape that was included most likely cause they are so big

kjrulz · 03-18-2010, 12:50 PM

sorry guys for not checking back on this. just got warm here, waiting for my order. will be installed by next week

XPO186 · 03-18-2010, 02:06 PM

Quote:

Originally Posted by jack1526

double sided tape and a few zip ties

Quote:

Originally Posted by jack1526

i'd use the 3M double sided tape with the red backing and make sure to prepare the area with alcohol or something, I've had these ballast come off with the tape that was included most likely cause they are so big

Dammit, this is exactly what I was thinking. I don't trust the sticky pads and the ballast is so damn beefy it would probably be a matter of time before they came loose.

Quote:

Originally Posted by kjrulz

sorry guys for not checking back on this. just got warm here, waiting for my order. will be installed by next week

Haha, how the heck did I my kit before you? Do you mind doing a write-up w/pics of your install? I'll throw some pics up of my install if I get the tape today...

kjrulz · 03-18-2010, 03:21 PM

Quote:

Originally Posted by XPO186

Dammit, this is exactly what I was thinking. I don't trust the sticky pads and the ballast is so damn beefy it would probably be a matter of time before they came loose.

Haha, how the heck did I my kit before you? Do you mind doing a write-up w/pics of your install? I'll throw some pics up of my install if I get the tape today...

haha, it's because I hadn't ordered it then. I've been doing some other stuff. In a few months I'll start posting up some interesting things (after warranty is up!).

BMWjames · 03-18-2010, 10:56 PM

Quote:

Originally Posted by E92-Lighting

06-07 e90 models will need a special harness

what kind of harness? is there a better HID fog kit for 07 e90?

kjrulz · 04-02-2010, 09:52 AM

just got it in today. i should have time tomorrow

E90PAT · 04-02-2010, 10:40 AM

Any output difference between the non-slim and slim?

kjrulz · 04-02-2010, 11:48 AM

Quote:

Originally Posted by E92PAT

Any output difference between the non-slim and slim?

no

03-16-2010, 06:36 PM	#23
MMAJNKE MMA Changed My Life! 340 Rep 6,627 Posts Drives: e92 m3 & f30 328i Join Date: Oct 2007 Location: so cal iTrader: (48) Garage List "2006 sport bi ... [0.00] 2008 e92 coupe [0.00]	i have ddm no error codes work great for me!
	Appreciate 0 Quote

03-17-2010, 02:02 AM	#25
jh7 Private 2 Rep 58 Posts Drives: 08 328i e92 Join Date: Jan 2008 Location: LA iTrader: (2)	anyone try to use them for angel eyes?
	Appreciate 0 Quote

03-17-2010, 09:33 AM	#26
MOTO69JOE Captain 29 Rep 876 Posts Drives: E46, E90 Join Date: Jul 2007 Location: The South iTrader: (3)	Anyone ventured to try these for headlights? Will they be reliable enough?
	Appreciate 0 Quote

03-17-2010, 06:41 PM	#30
D@m!n!C@no Why so serious? 10 Rep 132 Posts Drives: 335i Coupe, E30 325is Join Date: Jul 2008 Location: Old City, PA iTrader: (0)	I was trying the DDM kit, but I think to make them work Pn'P you need 12v.The OEM AE output is about 5v?. I have the DDM kit slim with 10000uf cap in my fogs so they are not that bad!! __________________ _________________________ 08 BMW e92 335i //AW/Coral Red 87 BMW e30 325is //JB/Cardinal Red
	Appreciate 0 Quote

03-18-2010, 10:10 AM	#34
MusclezMarinara Banned 276 Rep 5,018 Posts Drives: VALNCYA Join Date: Jan 2009 Location: Jersey iTrader: (23) Garage List 2011 BMW 1M [9.22] 2009 335i Sedan xdrive [9.34]	Have that kit on my 335 they go out alot..fault codes for "fog lamp malfunction" any fixes?
	Appreciate 0 Quote

03-18-2010, 11:45 AM	#35
E92-Lighting 889 Rep 35,253 Posts Drives: Next Generation LED Lighting Join Date: May 2008 Location: Walnut iTrader: (324)	06-07 e90 models will need a special harness
	Appreciate 0 Quote

03-18-2010, 12:50 PM	#38
kjrulz Mastermind 74 Rep 1,360 Posts Drives: girls krazy Join Date: Jan 2009 Location: your mother iTrader: (5)	sorry guys for not checking back on this. just got warm here, waiting for my order. will be installed by next week
	Appreciate 0 Quote

04-02-2010, 09:52 AM	#42
kjrulz Mastermind 74 Rep 1,360 Posts Drives: girls krazy Join Date: Jan 2009 Location: your mother iTrader: (5)	just got it in today. i should have time tomorrow
	Appreciate 0 Quote

04-02-2010, 10:40 AM	#43
E90PAT SOFLO CODING 212 Rep 3,587 Posts Drives: Z4M Join Date: Apr 2009 Location: SoFla iTrader: (18)	Any output difference between the non-slim and slim?
	Appreciate 0 Quote