I honestly feel horrible about this...

mds82 · 02-16-2010, 03:56 PM

I cant wait to see!!!

RambleJ · 02-16-2010, 04:07 PM

Hopefully this one doesn't fall off the grid like the others...

mwahlert · 02-16-2010, 04:07 PM

Quote:

Originally Posted by jpsimon

V4 will be able to handle most of it by itself with it's learning feature, only small changes will be needed to fine tune things. We're going to do a baseline of my car next week (as is with the stock turbos) and then dyno again after without changing anything... then again after things are fine tuned.

They have a mustang dyno FWIW.

the boost targets of the current v4 mapping are not going to be ideal for turbos that can support higher sustained boost at high rpm

there will be hp gains from additional airflow at same boost pressure - but more power to be made w/ higher boost pressures.

jpsimon · 02-16-2010, 04:08 PM

things are moving along quickly, work should start next week

jpsimon · 02-16-2010, 04:08 PM

Quote:

Originally Posted by mwahlert

the boost targets of the current v4 mapping are not going to be ideal for turbos that can support higher sustained boost at high rpm

there will be hp gains from additional airflow at same boost pressure - but more power to be made w/ higher boost pressures.

Yeah we intend to run more boost, that's the fine tuning I mentioned

mwahlert · 02-16-2010, 04:10 PM

Quote:

Originally Posted by jpsimon

Yeah we intend to run more boost, going to dyno at the same pressure then start upping it

i'm very curious to see where the stock fuel system limitations are.

cn555ic · 02-16-2010, 04:10 PM

I don't get it, you had no clue last week this secret company had turbo upgrade for our cars because you bought a used set that you were going to send out to UK, then miraculously you find this company and they have one available already....very confusing and skeptical I might add but will wait for your teaser updates....

Ferre86 · 02-16-2010, 04:10 PM

too many people are already interested that to get one

jpsimon · 02-16-2010, 04:12 PM

Quote:

Originally Posted by cn555ic

I don't get it, you had no clue last week this secret company had turbo upgrade for our cars because you bought a used set that you were going to send out to UK, then miraculously you find this company and they have one available already....very confusing and skeptical I might add but will wait for your teaser updates....

Let's just say the stars aligned

PaulBailey@ltbmw · 02-16-2010, 04:12 PM

GreenPlease · 02-16-2010, 04:14 PM

Quote:

i'm very curious to see where the stock fuel system limitations are.

Don't forget, we can always use meth to make up the slack in the stock fueling system. Better for the engine anyways. I'm just excited that there might be more durable turbos out there. My wastegates are already rattling after only 17,000 miles

Got a good feeling about this one...

jippii ensio · 02-16-2010, 04:15 PM

They fabricate various turbo manifolds for BMWs. So are they going to upgrade the exhaust manifolds too, or the turbos only?

cn555ic · 02-16-2010, 04:17 PM

Quote:

Originally Posted by jippii ensio

They fabricate various turbo manifolds for BMWs. So are they going to upgrade the exhaust manifolds too, or the turbos only?

HPF has a manifold upgrade coming soon.

dtp3347 · 02-16-2010, 04:21 PM

looks like the same car with different tails and wheels painted black

huyner328 · 02-16-2010, 04:22 PM

Definitely not CP-E, btw

However, I'd recommend their Standback for this project!

jippii ensio · 02-16-2010, 04:23 PM

Quote:

Originally Posted by cn555ic

HPF has a manifold upgrade coming soon.

HPF is working on the intake manifold. I believe these guys may upgrade our exhaust manifolds as that's their specialty.

ianthegreat · 02-16-2010, 04:25 PM

Quote:

Originally Posted by dtp3347

..what? lol

Nyulak · 02-16-2010, 04:28 PM

luckeeee

mwahlert · 02-16-2010, 04:38 PM

Quote:

Originally Posted by GreenPlease

Don't forget, we can always use meth to make up the slack in the stock fueling system. Better for the engine anyways. I'm just excited that there might be more durable turbos out there. My wastegates are already rattling after only 17,000 miles

Got a good feeling about this one...

i would not want to rely on meth as supplemental fuel. i want to know what max power is on pump fuel.... if i can make more w/ meth, great...but i don't want to rely on it.

alextremo · 02-16-2010, 04:38 PM

Is this shop in Stratford?

spdu4ea · 02-16-2010, 04:40 PM

Sounds like a local shop is doing the install, but not necessarily the fabrication/design. So I wouldn't think it was a NE company...

jpsimon · 02-16-2010, 04:44 PM

Quote:

Originally Posted by mwahlert

i would not want to rely on meth as supplemental fuel. i want to know what max power is on pump fuel.... if i can make more w/ meth, great...but i don't want to rely on it.

I don't plan on getting meth until spring/summer. So until then (unless someone else gets these and has meth) we'll only know pump gas numbers. I do have a barrel of 104 in the garage, so I can test out that as well

02-16-2010, 03:56 PM	#23
mds82 Major General 372 Rep 5,842 Posts Drives: 2006 325xi Join Date: Aug 2005 Location: South Central Connecticut iTrader: (40) Garage List 2006 325xi Snow Pics [0.00] 2006 BMW 325xi [0.00]	I cant wait to see!!!
	Appreciate 0 Quote

02-16-2010, 04:07 PM	#24
RambleJ Colonel 60 Rep 2,014 Posts Drives: F10 535i M-sport Join Date: Oct 2008 Location: Back in teh so cal iTrader: (2)	Hopefully this one doesn't fall off the grid like the others...
	Appreciate 0 Quote

02-16-2010, 04:08 PM	#26
jpsimon Team Zissou 3154 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	things are moving along quickly, work should start next week
	Appreciate 0 Quote

02-16-2010, 04:10 PM	#29
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	I don't get it, you had no clue last week this secret company had turbo upgrade for our cars because you bought a used set that you were going to send out to UK, then miraculously you find this company and they have one available already....very confusing and skeptical I might add but will wait for your teaser updates....
	Appreciate 0 Quote

02-16-2010, 04:10 PM	#30
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	too many people are already interested that to get one __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

02-16-2010, 04:12 PM	#32
PaulBailey@ltbmw General 678 Rep 26,876 Posts Drives: 2-325 330 2-335 2-Z4 2-135 X5d Join Date: Mar 2007 Location: Huntington Beach, CA iTrader: (34) Garage List 2008 BMW 335i E90 [7.00] 2011 BMW 335i E92 [7.96]
	Appreciate 0 Quote

02-16-2010, 04:15 PM	#34
jippii ensio Major 71 Rep 1,432 Posts Drives: 335i Join Date: Feb 2009 Location: On the road iTrader: (0)	They fabricate various turbo manifolds for BMWs. So are they going to upgrade the exhaust manifolds too, or the turbos only?
	Appreciate 0 Quote

02-16-2010, 04:21 PM	#36
dtp3347 Lieutenant 57 Rep 488 Posts Drives: Silver E92 335i Join Date: Nov 2009 Location: Alpharetta, Ga iTrader: (2)	looks like the same car with different tails and wheels painted black
	Appreciate 0 Quote

02-16-2010, 04:22 PM	#37
huyner328 Former N54 Fanatic 84 Rep 1,927 Posts Drives: Slow Join Date: Nov 2009 Location: NoVA iTrader: (8) Garage List 2014 Range Rover Sp ... [10.00] 2012 Fiat Abarth [10.00]	Definitely not CP-E, btw However, I'd recommend their Standback for this project! __________________ FREE MIXES! https://soundcloud.com/djbradpiff
	Appreciate 0 Quote

02-16-2010, 04:28 PM	#40
Nyulak Captain 29 Rep 957 Posts Drives: 2022 X3 M40i Join Date: Feb 2007 Location: SheffVill, OH iTrader: (4) Garage List 2009 BMW 535xi [10.00]	luckeeee
	Appreciate 0 Quote

02-16-2010, 04:38 PM	#42
alextremo Captain 51 Rep 966 Posts Drives: F10 550i Join Date: Sep 2008 Location: USA iTrader: (5)	Is this shop in Stratford?
	Appreciate 0 Quote

02-16-2010, 04:40 PM	#43
spdu4ea Custom User Title 9 Rep 105 Posts Drives: . Join Date: Jan 2010 Location: CA iTrader: (0)	Sounds like a local shop is doing the install, but not necessarily the fabrication/design. So I wouldn't think it was a NE company...
	Appreciate 0 Quote