CF interior wrap finished *pics*

sleepergm · 03-08-2011, 08:38 PM

Wow looks good ... any DIY?

Cuba · 03-10-2011, 06:51 PM

Quote:

Originally Posted by djkrajzi

This looks awesome!!! How long did it take? What did you use to curve the wrap and tuck is all in properly?

took around 6-7 hours including removing and installing the trim from the car.

the fabric is really flexible and stretchy so for the corners i stretched it and formed it around the corner then for the back i sliced the corner down the middle and glued it to the backing of the trim. once everything was glued down on the back i used an xacto knive and carefully trimmed away at the fabric. just so the vents and everything would fit back in properly.

djkrajzi · 03-13-2011, 03:42 AM

any diy on how to remove the trim. Where the clips are etc.???

Joshin · 03-14-2011, 01:07 PM

Are there any tricks to remove the trim without breaking the clips???

Krozi · 03-14-2011, 01:45 PM

Damn, you did a really good job with it. Is this non-adhesive backing a bit easier to work with than the Di-Noc?

BTW, I love the CF fabric on beige, the contrast looks so nice.

paulkim510 · 03-14-2011, 03:15 PM

Very Nice! Goes well with your interior

Hdarkace · 03-18-2011, 09:36 PM

I just got my fabric 2day from PYspeed...this is probably gunna be my biggest DIY and im kind of nervous. 2marrow im gunna grab some spray scissors and an xacto knife and get to work with taking off the trim..question.

Did you glue the front first before you wrapped the back? sorta like when gift wrapping a box?

Cuba · 03-29-2011, 04:19 PM

Quote:

Originally Posted by djkrajzi

any diy on how to remove the trim. Where the clips are etc.???

I used this DIY

Cuba · 03-29-2011, 04:20 PM

Quote:

Originally Posted by Joshin

Are there any tricks to remove the trim without breaking the clips???

just go slow and dont make any sudden jolts when removing and you should be fine.

Cuba · 03-29-2011, 04:21 PM

Quote:

Originally Posted by Krozi

Damn, you did a really good job with it. Is this non-adhesive backing a bit easier to work with than the Di-Noc?

BTW, I love the CF fabric on beige, the contrast looks so nice.

I think so.. I tried wrapping my mirror caps with the adhesive vinyl and that didnt work out to good.

Cuba · 03-29-2011, 04:23 PM

Quote:

Originally Posted by paulkim510

Very Nice! Goes well with your interior

thanks

Quote:

Originally Posted by Hdarkace

I just got my fabric 2day from PYspeed...this is probably gunna be my biggest DIY and im kind of nervous. 2marrow im gunna grab some spray scissors and an xacto knife and get to work with taking off the trim..question.

Did you glue the front first before you wrapped the back? sorta like when gift wrapping a box?

Yes. I sprayed the trim with glue then put the vinyl on and got the creases and bubbles out of the front side. then laid the piece on its front and worked on the back.. then trimmed away any holes I needed to trim away.

prican_2000 · 03-29-2011, 05:14 PM

I just picked up a roll of that 3M Di-Noc c/f stuff. Soon as I get a chance I'll start on it.

michaelalex17 · 03-29-2011, 05:35 PM

i went to pyspeed.com and there is dy-noc and then the stuff you used, whats the difference?

Cuba · 03-29-2011, 06:19 PM

Quote:

Originally Posted by michaelalex17

i went to pyspeed.com and there is dy-noc and then the stuff you used, whats the difference?

dy-noc has an adhesive on the back its like a sticker kind of.. the stuff I used is no adhesive so I used the 3M spray adhesive.

michaelalex17 · 03-29-2011, 06:24 PM

thanks. and so did you spray the front of the trim, and the put it down and then spray the rear of the trim and lay it down? or did you just spray the front? and when you spray it and lay it down does it become like a sticker or do you have time to move it around?

Cuba · 03-29-2011, 06:37 PM

Quote:

Originally Posted by michaelalex17

thanks. and so did you spray the front of the trim, and the put it down and then spray the rear of the trim and lay it down? or did you just spray the front? and when you spray it and lay it down does it become like a sticker or do you have time to move it around?

I had the trim facing upward, sprayed it
- applied the vinyl on one end and worked my way to the other side
- then laid the trim on its front side(the one i just sprayed)
- sprayed the backside
- tucked in everything and worked the corners
- cut out air vents or other holes
- glue the vinyl around the holes to the backside
- let it sit and dry

hope this helps

0311_grunt · 04-27-2011, 08:26 PM

Cuba, what are the two colors you used?

I was thinking of doing the glossy titanium and matte charcoal...black interior

NiVeDh · 04-27-2011, 08:29 PM

Quote:

Originally Posted by steviefranchise

is this fabric matte or glossy titanium?

It's not fabric - it's the silver clearcoated CF kit from EAS. The charcoal CF you see in the photo is fabric.

Cuba · 04-27-2011, 09:58 PM

I'm not sure I know what you mean. I only used one cf fabric, that was the matte black

Quote:

Originally Posted by 0311_grunt

Cuba, what are the two colors you used?

I was thinking of doing the glossy titanium and matte charcoal...black interior

Jason@Euro-Division · 04-28-2011, 05:46 AM

Looks great!

Cuba · 04-28-2011, 08:26 AM

Quote:

Originally Posted by Jason@Euro-Division

Looks great!

Hasek9339 · 04-28-2011, 07:49 PM

I am getting a little tired of my light burl walnut and really like the look of the black matte CF! I love the look the the CF leather found on the M3

I have beige interior and I think that combo looks great!!!

03-08-2011, 08:38 PM	#23
sleepergm Lieutenant 52 Rep 541 Posts Drives: White 335i M-Tech Join Date: May 2007 Location: Hong Kong iTrader: (2)	Wow looks good ... any DIY? __________________ 335 E92 - M-Tech - Eisenmann Race - Custom DP -RBturbos / Stage2 - GIAC S2 - Injen CAI - Forge FMIC - Forge DV's - Stri Gauges - ATI Pod - AEM Air/Fuel - Ericsson Carbon Trunk - Carbon Splitters - ER Charge Pipe - ER Engine Cover - Koni FSD - HR Sport - Brembo Racing Brakes - ICONZ custom rims - RPI Scoops - Burger O2 Sim
	Appreciate 0 Quote

03-13-2011, 03:42 AM	#25
djkrajzi Second Lieutenant 8 Rep 285 Posts Drives: 2007 E92 328xi Alpine White Join Date: Jun 2010 Location: Chicago iTrader: (3)	any diy on how to remove the trim. Where the clips are etc.???
	Appreciate 0 Quote

03-14-2011, 01:07 PM	#26
Joshin Private First Class 19 Rep 119 Posts Drives: 2012 AW X5d Join Date: Oct 2009 Location: Orlando, Fl iTrader: (0)	Are there any tricks to remove the trim without breaking the clips???
	Appreciate 0 Quote

03-14-2011, 01:45 PM	#27
Krozi Colonel 176 Rep 2,736 Posts Drives: 2008 E92 ///M3 Alpine White Join Date: Oct 2009 Location: SoFla - Bonita Springs iTrader: (24)	Damn, you did a really good job with it. Is this non-adhesive backing a bit easier to work with than the Di-Noc? BTW, I love the CF fabric on beige, the contrast looks so nice. __________________ 2008 E92 ///M3 Alpine White//Fox Red//6MT// Florida Bimmer - Join us on FaceBook!
	Appreciate 0 Quote

03-14-2011, 03:15 PM	#28
paulkim510 Lieutenant 37 Rep 540 Posts Drives: e92 Join Date: Apr 2008 Location: BaY Area iTrader: (6) Garage List 2007 E92 [0.00]	Very Nice! Goes well with your interior
	Appreciate 0 Quote

03-18-2011, 09:36 PM	#29
Hdarkace First Lieutenant 18 Rep 329 Posts Drives: 2007 328I Join Date: Feb 2011 Location: Charlotte NC iTrader: (0)	I just got my fabric 2day from PYspeed...this is probably gunna be my biggest DIY and im kind of nervous. 2marrow im gunna grab some spray scissors and an xacto knife and get to work with taking off the trim..question. Did you glue the front first before you wrapped the back? sorta like when gift wrapping a box?
	Appreciate 0 Quote

03-29-2011, 05:14 PM	#34
prican_2000 Private 4 Rep 88 Posts Drives: 13 335i M-Sport Join Date: Mar 2011 Location: SoMd iTrader: (0)	I just picked up a roll of that 3M Di-Noc c/f stuff. Soon as I get a chance I'll start on it. __________________ A United States Marine: "No better friend, no worse enemy." BSM 13 E93 335i:Mods Pending: Golf Tee Mod, Burger CAI, Burger Cowl Vents -Current Silver 11 E90 335xi:20% Tint, Golf Tee Mod, 17x9 Apex ARC-8, Burger CAI, Burger Cowl Vent -GONE Grey 08 E92 335xi:20% Tint, Dynavin N6 Nav, Golf Tee Mod, 17x9 Apex ARC-8, AFE CAI -GONE
	Appreciate 0 Quote

03-29-2011, 05:35 PM	#35
michaelalex17 Brigadier General 632 Rep 3,400 Posts Drives: Manual Wagon Join Date: Aug 2010 Location: CT iTrader: (4)	i went to pyspeed.com and there is dy-noc and then the stuff you used, whats the difference?
	Appreciate 0 Quote

03-29-2011, 06:24 PM	#37
michaelalex17 Brigadier General 632 Rep 3,400 Posts Drives: Manual Wagon Join Date: Aug 2010 Location: CT iTrader: (4)	thanks. and so did you spray the front of the trim, and the put it down and then spray the rear of the trim and lay it down? or did you just spray the front? and when you spray it and lay it down does it become like a sticker or do you have time to move it around?
	Appreciate 0 Quote

04-27-2011, 08:26 PM	#39
0311_grunt Second Lieutenant 9 Rep 260 Posts Drives: 2008 M3 Join Date: Apr 2009 Location: Superior, CO iTrader: (0)	Cuba, what are the two colors you used? I was thinking of doing the glossy titanium and matte charcoal...black interior
	Appreciate 0 Quote

04-28-2011, 05:46 AM	#42
Jason@Euro-Division First Lieutenant 62 Rep 371 Posts Drives: BMW Join Date: Jan 2009 Location: Melbourne / Australia iTrader: (2)	Looks great!
	Appreciate 0 Quote

04-28-2011, 07:49 PM	#44
Hasek9339 Lieutenant 51 Rep 569 Posts Drives: 2009 328i Montego Blue Join Date: Nov 2008 Location: Buffalo NY iTrader: (2)	I am getting a little tired of my light burl walnut and really like the look of the black matte CF! I love the look the the CF leather found on the M3 I have beige interior and I think that combo looks great!!!
	Appreciate 0 Quote