[muvaside]

Dan Harman quoted me 275 for dyno and install !

[Driver72]

Originally Posted by muvaside

Dan Harman quoted me 275 for dyno and install !

He charges $100 an hour for the dyno or $75 for three runs.
So he's basically charging $175-200 for the install.
That's not too bad but it is a bit pricey considering it takes only about 15-20 minutes to install. Total time to install and dyno is around 45 minutes.

Originally Posted by Longboarder

Not quite sure the LSD is needed...lined up with an 07 911 GT3 today and pulled on it from off the line. NO tire spin, just modded the throttle and I pulled decisively. They guy was revving to at least 6K from the line so I know he gave it everything. I ended up pulling about a car to 90 MPH where I shut down in 3rd gear.

are you claiming you beat a 997 GT3 in your 335i? LOL funniest shit i've read in awhile.

i know our cars are fast and all but i know for a fact they aren't that fast

[Driver72]

Originally Posted by that guy nico

are you claiming you beat a 997 GT3 in your 335i? LOL funniest shit i've read in awhile.

i know our cars are fast and all but i know for a fact they aren't that fast

I'm guessing it was a "base" 997 911 Carrera with GT3 body kit.
Even with a PROcede, our cars will barely, if at all hang with a 997 Carrera S.
They trap in the 112+ mph range and hit 60 in the low 4's.

Heck a strong running 996 S will give a PROceded 335i all it can handle.

[jthurs]

The List:

1. Jthurs
2. kujo
3. SfValley335i
4. SoCal335i
5. Muvaside
6. Luderule

I agree with a lot of what everyone is saying so let me see if we are all in agreement.

-A group install is most important - As far as dynoing goes we don't really care.
-We would like the new PROCEDE with updated map v1.3 and the map switcher

I emailed Calvin, hopefully we can work something out with Shiv, Calvin, etc. so that we can make this happen. Because I do really want the Procede but I do not want to snap ecu clips and make even worse errors that could potentially damage my car. Also I am excited about the map switcher and new maps they are doing and would love to get those installed as well.

[elmaki]

Originally Posted by hotrod182

I wonder if the 997 GT3 was just carefully breaking in his engine. Or maybe it was a regular 911 with a body kit? Accoreding to this month's Motor Trend, the GT3 is ultra quick, and at 117.8mph in the qtr mile, very fast. Oh, and it has a 193mph top speed also...

those times are even better with their automatic transmission, thought it was weird when I saw nothing but manual transmission GT3'S on the lot.



Elmaki

[hotrod182]

Originally Posted by elmaki

those times are even better with their automatic transmission, thought it was weird when I saw nothing but manual transmission GT3'S on the lot.



Elmaki

I didn't know you could get a GT3 in an automatic...

[OpenFlash]

Originally Posted by jthurs

-A group install is most important - As far as dynoing goes we don't really care.
-We would like the new PROCEDE with updated map v1.3 and the map switcher

I think that's do-able. But we're posting v1.4 online tomorrow night

Shiv

[kujo]

turbo's have ATs, GT2/3's are MT only, AFAIK

[kujo]

Originally Posted by shiv@vishnu

I think that's do-able. But we're posting v1.4 online tomorrow night

Shiv

Just tell us when Shiv !!! Switcher AND updated maps ?

[muvaside]

Originally Posted by shiv@vishnu

I think that's do-able. But we're posting v1.4 online tomorrow night

Shiv

So Shiv , the people who are still waiting for their delivery of their proceed , will have the v1.4 map already installed ?Also , what would be the major difference between the v1.3 & v1.4 ?

[SfValley335i]

Originally Posted by kujo

Just tell us when Shiv !!! Switcher AND updated maps ?

bump

[jthurs]

Originally Posted by SfValley335i

bump

Tonight?!?! I'm down!

[SfValley335i]

Originally Posted by jthurs

Tonight?!?! I'm down!

nothing is tonight... just a "bump" to bring the thread back up to the top. Hopefully we can get a date set soon.

[jthurs]

Originally Posted by SfValley335i

nothing is tonight... just a "bump" to bring the thread back up to the top. Hopefully we can get a date set soon.

I know, I was just joking about tonight. Is anyone else in for the group install? So far we have 6 people. Also, since we don't really need a shop with a Dyno anymore, does Shiv or anyone have an suggestions of where we should have it?

[kujo]

I do want a before/after dyno.
It's not being 'tuned', but I want to know what my car is putting down.

kj

[muvaside]

same here .

[jthurs]

Originally Posted by kujo

I do want a before/after dyno.
It's not being 'tuned', but I want to know what my car is putting down.

kj

All good, I'm fine with dynoing it too

[muvaside]

Originally Posted by jthurs

All good, I'm fine with dynoing it too

Jthurs - find out if Dan Harman is willing to give us a better price than 275 for dyno and install . We should also try to find out where everyone in the group lives around .Maybe we can find a closer place , just a thought . I'm in Stevenson Ranch (Santa Clarita valley 91381) .

[kujo]

Originally Posted by muvaside

Jthurs - find out if Dan Harman is willing to give us a better price than 275 for dyno and install . We should also try to find out where everyone in the group lives around .Maybe we can find a closer place , just a thought . I'm in Stevenson Ranch (Santa Clarita valley 91381) .

Cool. I'm in Santa Clarita as well !!

[jthurs]

Originally Posted by kujo

Cool. I'm in Santa Clarita as well !!

I'm in Los Angeles, I know of places in the Valley and in Los Angeles, where is Dan Harman located?

I hear the map switcher with bluetooth remote controller might not be ready for 6-8 weeks. I will wait because this feature sounds sick!

Where is everyone else? What do you guys think? I'd love to get one off the first line of bluetooth procedes produced!!!!

[Luderule]

Orange county here