[Monster335]

I also cannot get the IJE0S maps......Hope its resolved soon. Of course this happens when I have nothing to do right now.

Also, are you guys keeping both the box checked for beta version under the options tab?

[vasillalov]

Originally Posted by COBB Tuning

Improved Throttle Mapping
All of our new AccessPORT calibrations feature improved throttle mapping for smoother power delivery and less, on/off feel. This will give your BMW a smoother, more linear feel while still giving that increase in power that enthusiasts desire.

THANK YOU! Much respect!

EDIT:
Are we supposed to uninstall/reinstall the AP tune from the ECU, or just reflash the new calibrations?

[acdHQK713K]

Hmm. So what map does one use if they are FBO and can only get 91 octane in California? Not very clear from the definitions

[possible335i2008]

Originally Posted by vasillalov

THANK YOU! Much respect!

EDIT:
Are we supposed to uninstall/reinstall the AP tune from the ECU, or just reflash the new calibrations?

update the AP with new firmware then download the map you want and upload to the car, maybe 5 minutes. The linear throttle is nice with the sport map.

[Monster335]

here's a screen shot of my AP under the "updates" tab. Keeps saying my AP is up to date. Let me know if this is what you guys have.

Release Notes History on AP-BMW-001 AccessPORT


BETA Firmware Update 1.6.5.0-2485:
Date:
8/10/2011
New Features:

Added new vehicle support:

2010/11 BMW 335is

Map Support:
1.
Stg0 v200.ptm
2.
Stg1 91 v300.ptm
3.
Stg1 93 v300.ptm
4.
Valet v200.ptm

Data Monitor Updates: Expanded monitor support from 19 to 68 sensor read-outs.

Monitor Additions:

Accel Ped. Pos.

Actual Load

Boost

Boost Mean Abs

Boost Set Limit

Boost Setpoint Factor

Charge Air Temp.

Cyl1 Timing Cor

Cyl2 Timing Cor

and many more, see complete monitor list click here.

DTC Task Updates: Clear historic DTCs from the ECU.

Map Updates: v300 maps (all vehicles)

Internal changes to map storage system for future addtions of new features (No tuning data updates).

Stg0 v300.ptm

Stg1 91 v300.ptm

Stg1 93 v300.ptm

Stg1 ACN91 v300.ptm

Valet v300.ptm

Updated flash routine for future ECU feature development.

Install time increased by 10 minutes (total install time 30 mins.).

First flash on an already installed AP will take 10 mins. Recurring flashes will take ~60 secs.
Bug Fixes:

Cruise Control bug fixed in updated maps. (see instructions below)
1.
Obtain firmware update 1.6.5.0-2485.
2.
Flash desired map.

DTC Fixes: Improved DTC clear code routines in updated maps.

Codes such as P2FA3 is now cleared by AccessPORT.
1.
Obtain firmware update 1.6.5.0-2485.
2.
Flash desired map.

[possible335i2008]

Just plug in your ap and click update on the ap manager and you will be good to go, just upload the map you want and flash it

[Monster335]

Originally Posted by possible335i2008

Just plug in your ap and click update on the ap manager and you will be good to go, just upload the map you want and flash it

I did that. It now says "up to date" everytime i click on "check firmware" . Whats strange is in my program files on my computer i do see 3 new folders that have later versions, however when my AP is connected the only version is showing since aug 10. any suggestions?

[acdHQK713K]

Originally Posted by Monster335

I did that. It now says "up to date" everytime i click on "check firmware" . Whats strange is in my program files on my computer i do see 3 new folders that have later versions, however when my AP is connected the only version is showing since aug 10. any suggestions?

Probably have to select Beta under "options" menu

[Monster335]

Originally Posted by Stangorang

Probably have to select Beta under "options" menu

Believe me, its been tried.

[possible335i2008]

Hum it took my Ap about 6-7 minutes to update it's firmware, check and see which version you are, the readme notes end on the 8-10 update

[Monster335]

Originally Posted by possible335i2008

Hum it took my Ap about 6-7 minutes to update it's firmware, check and see which version you are, the readme notes end on the 8-10 update

yea thats the end date from my AP which is aug 10 2001. Should I delete the folders and try to see if will give me another update option.

[COBB Tuning]

IJE0S was my fault. I'm sorry for the inconvenience. I accidentally had an uppercase where there was supposed to be a lowercase.

This latest firmware is not a beta. Uncheck Beta in options and then click update.

Thanks,

Gary

[ModBargains.com]

Thanks for the updates/support COBB team. I just downloaded the IJEOS version and didn't have an issue putting these new maps through the COBB AP Manager. However, under the IJEOS calibrations tab, it still will not allow you to download the Stage0 IJE0S v301 or Valet IJE0S v301 maps. Will take the car for a spin tomorrow morning to see which map I'm going to stick with!

[Monster335]

I am able to load the new maps to the AP Manager now. Unchecked beta version under options tab. However in the updates tab the release notes history still shows that aug 10 2011 is the most recent update.

[COBB Tuning]

Originally Posted by Monster335

I am able to load the new maps to the AP Manager now. Unchecked beta version under options tab. However in the updates tab the release notes history still shows that aug 10 2011 is the most recent update.

Updated release notes should be available in the morning.

Thanks,

Gary

[Bleep]

Hmm, AP manager isn't automatically updating my Accessport with the new maps after updating the firmware. I8A0S is available on the site but I only see v300 on the manager.

[ModBargains.com]

Originally Posted by Bleep

Hmm, AP manager isn't automatically updating my Accessport with the new maps after updating the firmware. I8A0S is available on the site but I only see v300 on the manager.

1) You have to manually download the v301 maps from the calibrations tab on COBBs site.
2) You then use the AP manager to upload the new v301 maps to your COBB AP handheld unit.
3) Plug your COBB AP into the OBDII slot -> tunes -> then choose the map of your choice

[JStang]

Originally Posted by riceygts

Anyone getting stuck on the "Flashing AccessPORT step 1 of 1" window?

I was stuck on this for a couple of hours last night and tried again this morning and nothing. Any suggestions COBB?

[Zasquatch]

Any explaination of the difference between the "Alt. Throt. v1" and the "linear" maps though? I guess I will try Linear first, but I know alot of us are wondering how the different throttle maps changed.

[slowSwede]

Mr **********s, where did you get the economymap from?

[gboop]

Originally Posted by JStang

I was stuck on this for a couple of hours last night and tried again this morning and nothing. Any suggestions COBB?

Have the same problem. Stuck "Updating" and final useful message of "error ocurred".

What worries me is that the standard COBB response to these kind of problems is that the cable may be going out.

Already tried another cable and computer. I just hope my AP does not need to be sent in with the crappy limp prone v3.00 map still on my car.

[JStang]

Originally Posted by gboop

Have the same problem. Stuck "Updating" and final useful message of "error ocurred".

What worries me is that the standard COBB response to these kind of problems is that the cable may be going out.

Already tried another cable and computer. I just hope my AP does not need to be sent in with the crappy limp prone v3.00 map still on my car.

I have also tried multiple computers and cables. I have tried two different Macbooks and my ECU is I8A0S. Anything common between the three of us having this issue?