Got my CYBA tips welded on today

Cyprio · 03-20-2013, 10:11 AM

Thinking of these tips from Cyba for my e91.
What do you guys think?

Mob, hope you don't mind if I interject.

mob17 · 03-20-2013, 12:20 PM

No worries cyprio!

Its a personal preference, i believe you can't really go wrong with any of his tips . I have seen these kind of tips (can't remember if they were these style exactly but they were CYBA tips) on Mr Singhs E91, and they looked mean!

Greg330 · 03-20-2013, 01:22 PM

Quote:

Originally Posted by Cyprio

Thinking of these tips from Cyba for my e91.
What do you guys think?

Mob, hope you don't mind if I interject.

These are the ones I'm thinking of getting.

I'm really surprised they have the same bore size, I always thought they slotted in with a smaller connection.

Hotcoupe posted a pic of his and I'm sure his did, will have to review my old thread....

Greg330 · 03-20-2013, 01:25 PM

Like so.....

Cyprio · 03-20-2013, 01:48 PM

I didn't realise that they were the same bore size.

I've left a post on Cyba's thread asking him if they will fit straight over the 335 oem exhaust, but I suspect he will confirm what you have mentioned.

Will have to take Mob's route, a good job that Mob brought this up in his first post.

Josh1a1h · 03-20-2013, 01:54 PM

Nice work! I got the same ones!!!

You clearly have good taste

I decided to have mine similar to yours. I did not want them to stick out very far. I was thinking of going 4" but as you said they don't do them in the size sadly

Pics with my old wheels on.

mob17 · 03-20-2013, 02:23 PM

Quote:

Originally Posted by Josh1a1h

Nice work! I got the same ones!!!

You clearly have good taste

I decided to have mine similar to yours. I did not want them to stick out very far. I was thinking of going 4" but as you said they don't do them in the size sadly

Haha thanks! Yeah he doesn't but he has a pic somewhere on one of his threads that compares the 3.8" and 4", can't even notice the difference.

Mate that looks awesome, especially with the diffuser!!! I also want to get the performance diffuser at some point in the future and i was thinking of waiting until i do to weld the tips on, but due to other planned mods and commitments that will have to wait so i just put them on now!

Have you found them relatively easy to keep them nice and shiny? Did you bother applying protectant?

Greg330 · 03-20-2013, 02:25 PM

Quote:

Originally Posted by Cyprio

I didn't realise that they were the same bore size.

I've left a post on Cyba's thread asking him if they will fit straight over the 335 oem exhaust, but I suspect he will confirm what you have mentioned.

Will have to take Mob's route, a good job that Mob brought this up in his first post.

Keep me posted on what he says...

Sparky68 · 03-20-2013, 03:45 PM

Use mine as a additional bumper

Josh1a1h · 03-20-2013, 03:59 PM

Cheers mate. Keeping the, shiny is hard. I just give them a good scrub every time I wash the car. I haven't got anything specific for the chrome tips... Just elbow grease haha

Sparky68 · 03-20-2013, 04:00 PM

Use autosol.

mob17 · 03-20-2013, 04:06 PM

Thanks guys. I'll see how they cope, and if neccessary, will give autosol a try.

Hotcoupe · 03-20-2013, 05:26 PM

Quote:

Originally Posted by Greg330

These are the ones I'm thinking of getting.

I'm really surprised they have the same bore size, I always thought they slotted in with a smaller connection.

Hotcoupe posted a pic of his and I'm sure his did, will have to review my old thread....

The tips I had were adapted to fit the custom exhaust I had at the time.
The tips slid over the pipe and simply screwed down onto the pipe.

The tips Cyprio posted are the same (ish) bore size as the OEM pipe, so need welding on after cutting off the OEM tips.

Tips on the left are from Cyba, the tips on the right are the original st/steel tips that came with the custom exhaust.

Cyprio · 03-20-2013, 06:35 PM

Thanks for the help Hcoupe.

AWBimmer · 03-20-2013, 07:01 PM

Quote:

Originally Posted by Josh1a1h

Nice work! I got the same ones!!!

You clearly have good taste

I decided to have mine similar to yours. I did not want them to stick out very far. I was thinking of going 4" but as you said they don't do them in the size sadly

Pics with my old wheels on.

Boy oh boy that looks sick! I'm gonna be getting mine done to project just that much (or little) too.

Josh1a1h · 03-20-2013, 07:02 PM

Subtle right? I do not like it when they stick out too far.

Cheers mate

AWBimmer · 03-20-2013, 07:04 PM

Quote:

Originally Posted by Josh1a1h

Subtle right? I do not like it when they stick out too far.

Cheers mate

Where did you have that done?

Cyprio · 03-20-2013, 07:17 PM

Quote:

Originally Posted by Josh1a1h

Subtle right? I do not like it when they stick out too far.

Cheers mate

Is the top leading edge of the tips level with the diffuser cutouts or slightly inside?

Josh1a1h · 03-20-2013, 07:20 PM

It is level mate.
my old Indy did it for me mate. Not the cleanest welds... But does the job.

Cyprio · 03-20-2013, 07:24 PM

looks real good.

Cyprio · 03-21-2013, 09:52 AM

Quote:

Originally Posted by Greg330

Keep me posted on what he says...

He's come back, saying, yes they will fit no problem, though I think he means they can be welded onto the oem bore (not fitting over the top), as already mentioned by hcoupe.

Josh1a1h · 03-21-2013, 11:13 AM

Yes they will have to be welded onto the oem bore... It just means you have to be accurate with how much. You cut off as you cannot adjust it easily.

03-20-2013, 10:11 AM	#23
Cyprio Captain 33 Rep 918 Posts Drives: 2014 Audi S4 B/Edition Join Date: Mar 2011 Location: Colchester. UK iTrader: (2)	Thinking of these tips from Cyba for my e91. What do you guys think? Mob, hope you don't mind if I interject. Attached Images __________________ Life is too short to drink bad beer, marry ugly, or not drive the car you want at least once
	Appreciate 0 Quote

03-20-2013, 12:20 PM	#24
mob17 Major General 397 Rep 5,613 Posts Drives: E92 335D Join Date: Mar 2012 Location: East Midlands, UK iTrader: (5)	No worries cyprio! Its a personal preference, i believe you can't really go wrong with any of his tips . I have seen these kind of tips (can't remember if they were these style exactly but they were CYBA tips) on Mr Singhs E91, and they looked mean! Last edited by mob17; 03-20-2013 at 01:04 PM..
	Appreciate 0 Quote

03-20-2013, 01:25 PM	#26
Greg330 Major 69 Rep 1,268 Posts Drives: E91 335i Join Date: Mar 2012 Location: South Coast iTrader: (0)	Like so.....
	Appreciate 0 Quote

03-20-2013, 01:48 PM	#27
Cyprio Captain 33 Rep 918 Posts Drives: 2014 Audi S4 B/Edition Join Date: Mar 2011 Location: Colchester. UK iTrader: (2)	I didn't realise that they were the same bore size. I've left a post on Cyba's thread asking him if they will fit straight over the 335 oem exhaust, but I suspect he will confirm what you have mentioned. Will have to take Mob's route, a good job that Mob brought this up in his first post. __________________ Life is too short to drink bad beer, marry ugly, or not drive the car you want at least once
	Appreciate 0 Quote

03-20-2013, 01:54 PM	#28
Josh1a1h Banned 178 Rep 3,828 Posts Drives: AzuriteBlack 335i E92 Join Date: Aug 2011 Location: Central North to West London iTrader: (2)	Nice work! I got the same ones!!! You clearly have good taste I decided to have mine similar to yours. I did not want them to stick out very far. I was thinking of going 4" but as you said they don't do them in the size sadly Pics with my old wheels on.
	Appreciate 0 Quote

03-20-2013, 03:45 PM	#31
Sparky68 Brigadier General 798 Rep 4,360 Posts Drives: 2016 M2 Alpine White Join Date: Oct 2012 Location: Cambs UK iTrader: (11) Garage List 2016 BMW M2 [0.50] 2017 BMW F30 330D [0.00] 2014 M135 [0.00] 2007 BMW 335i [0.00]	Use mine as a additional bumper __________________ OG M2 7sp DCT Masata FMIC -Masata Boost Pipe - Cobra Catless DP - Powervalve Exhaust - Devilsown Methanol Injection Turbosmart BOV BM3 Stage 3 Halim custom map Pure 500
	Appreciate 0 Quote

03-20-2013, 03:59 PM	#32
Josh1a1h Banned 178 Rep 3,828 Posts Drives: AzuriteBlack 335i E92 Join Date: Aug 2011 Location: Central North to West London iTrader: (2)	Cheers mate. Keeping the, shiny is hard. I just give them a good scrub every time I wash the car. I haven't got anything specific for the chrome tips... Just elbow grease haha
	Appreciate 0 Quote

03-20-2013, 04:00 PM	#33
Sparky68 Brigadier General 798 Rep 4,360 Posts Drives: 2016 M2 Alpine White Join Date: Oct 2012 Location: Cambs UK iTrader: (11) Garage List 2016 BMW M2 [0.50] 2017 BMW F30 330D [0.00] 2014 M135 [0.00] 2007 BMW 335i [0.00]	Use autosol. __________________ OG M2 7sp DCT Masata FMIC -Masata Boost Pipe - Cobra Catless DP - Powervalve Exhaust - Devilsown Methanol Injection Turbosmart BOV BM3 Stage 3 Halim custom map Pure 500
	Appreciate 0 Quote

03-20-2013, 04:06 PM	#34
mob17 Major General 397 Rep 5,613 Posts Drives: E92 335D Join Date: Mar 2012 Location: East Midlands, UK iTrader: (5)	Thanks guys. I'll see how they cope, and if neccessary, will give autosol a try.
	Appreciate 0 Quote

03-20-2013, 06:35 PM	#36
Cyprio Captain 33 Rep 918 Posts Drives: 2014 Audi S4 B/Edition Join Date: Mar 2011 Location: Colchester. UK iTrader: (2)	Thanks for the help Hcoupe. __________________ Life is too short to drink bad beer, marry ugly, or not drive the car you want at least once
	Appreciate 0 Quote

03-20-2013, 07:02 PM	#38
Josh1a1h Banned 178 Rep 3,828 Posts Drives: AzuriteBlack 335i E92 Join Date: Aug 2011 Location: Central North to West London iTrader: (2)	Subtle right? I do not like it when they stick out too far. Cheers mate
	Appreciate 0 Quote

03-20-2013, 07:20 PM	#41
Josh1a1h Banned 178 Rep 3,828 Posts Drives: AzuriteBlack 335i E92 Join Date: Aug 2011 Location: Central North to West London iTrader: (2)	It is level mate. my old Indy did it for me mate. Not the cleanest welds... But does the job.
	Appreciate 0 Quote

03-20-2013, 07:24 PM	#42
Cyprio Captain 33 Rep 918 Posts Drives: 2014 Audi S4 B/Edition Join Date: Mar 2011 Location: Colchester. UK iTrader: (2)	looks real good. __________________ Life is too short to drink bad beer, marry ugly, or not drive the car you want at least once
	Appreciate 0 Quote

03-21-2013, 11:13 AM	#44
Josh1a1h Banned 178 Rep 3,828 Posts Drives: AzuriteBlack 335i E92 Join Date: Aug 2011 Location: Central North to West London iTrader: (2)	Yes they will have to be welded onto the oem bore... It just means you have to be accurate with how much. You cut off as you cannot adjust it easily.
	Appreciate 0 Quote