Custom Exhaust project, opinions welcome

E90Company · 06-24-2013, 09:10 PM

Is that first video with your RB's or stock turbos?

robc1976 · 06-24-2013, 09:35 PM

Quote:

Originally Posted by triggz

Super quiet resonators? I thought it was the 1792 only?

They do make a "quite" one. These look like a good solution for us with straight pipes....wonder if they will fit side by side?

robc1976 · 06-24-2013, 09:35 PM

Quote:

Originally Posted by E90Company

Is that first video with your RB's or stock turbos?

both have RB'S.

135Pats · 06-24-2013, 09:44 PM

Meisterschaft race FTW. But i'm biased.

triggz · 06-24-2013, 10:00 PM

Quote:

Originally Posted by robc1976

They do make a "quite" one. These look like a good solution for us with straight pipes....wonder if they will fit side by side?

Put your old ones where your secondaries are and put the quiet ones where your mufflers used to be. Order it now and post vids.

robc1976 · 06-24-2013, 10:47 PM

Quote:

Originally Posted by triggz

Put your old ones where your secondaries are and put the quiet ones where your mufflers used to be. Order it now and post vids.

lol! Will do....anyone know where to get slip on burnt titanium tips?

R.G. · 06-24-2013, 11:02 PM

robc1976 · 06-24-2013, 11:28 PM

Quote:

Originally Posted by triggz

Put your old ones where your secondaries are and put the quiet on!es where your mufflers used to be. Order it now and post vids.

Those quite resonators almost look like mufflers...hop they don't tame the note too much! I am a bit hesitant with this....4 resonators is a lot lol!

longliven54 · 06-24-2013, 11:31 PM

a local member has resonated dps, 2 resonators in place of secondaries + muffler delete.
it sounds very nice. very minimal drone or rasp.

i personally have electric cutouts. i have e-bay exhaust piping(painted black to prevent any possible rust) with stock muffler with cutouts rite before my resonators. quiet but beefy sounding for cruising around. cutouts for when i m out having fun and dont care about drone or rasp.
been running this setup for about 3years now.

triggz · 06-24-2013, 11:31 PM

Quote:

Originally Posted by robc1976

Those quite resonators almost look like mufflers...hop they don't tame the note too much! I am a bit hesitant with this....4 resonators is a lot lol!

They may look like mufflers but they don't have the wool or whatever that material is inside. I doubt it would tone it down. Resonators don't tone down exhausts, it just gets rid of the really loud noises (rasp). I honestly think itll sound awesome.

robc1976 · 06-24-2013, 11:38 PM

I wonder if I should get the 3" diameter inlet/outlet on the resonators so they can slide over the exhaust for ease of welding? Any thoughts?

ken1137 · 06-24-2013, 11:42 PM

PM Cyba...maybe they can fabricate some if their new 4.0s are not 4". Subscribed for final exhaust sound

Dr. G · 06-24-2013, 11:43 PM

The ultra quiets are like the bottle styled reso's on steroids, they should do a very good job at cleaning up rasp and shouldn't add any restriction to flow. The in cabin sound will most likely become muffled at low rpm, I'm not sure if that's a good thing or bad thing for you haha. I kinda miss the growl in the cabin I had before using resonators.

Resonator Size: 4.5" x 6.75" Oval Body, 10" Long
Overall Length: 14"
That's the specs if you hadn't already looked them up.

Are you doing the welding yourself or will you be having to pay labour to mess around with the setup?

Dr. G · 06-24-2013, 11:45 PM

Quote:

Originally Posted by robc1976

I wonder if I should get the 3" diameter inlet/outlet on the resonators so they can slide over the exhaust for ease of welding? Any thoughts?

If you have oem piping still left somewhere on your exhaust the 2.5" will slide over it

robc1976 · 06-24-2013, 11:47 PM

Quote:

Originally Posted by 135Pats

Meisterschaft race FTW. But i'm biased.

Looks great to me!

robc1976 · 06-24-2013, 11:49 PM

Quote:

Originally Posted by Dr. G

If you have oem piping still left somewhere on your exhaust the 2.5" will slide over it

I am going with all new SS...no OEM...but this is great info....the OEM exhaust is smaller than 2.5"? I thought it was 2.5"? Is it 2.25"?

Dr. G · 06-24-2013, 11:56 PM

Quote:

Originally Posted by robc1976

I wonder if I should get the 3" diameter inlet/outlet on the resonators so they can slide over the exhaust for ease of welding? Any thoughts?

Quote:

Originally Posted by robc1976

I am going with all new SS...no OEM...but this is great info....the OEM exhaust is smaller than 2.5"? I thought it was 2.5"? Is it 2.25"?

Ahhh ok sorry I must have missed that, that gives you a lot of options to play with resonator placement and such. The OE is 2.25" ID as far as I am aware, I was able to kinda slide the 2.5" resonators over top of the OE piping.

robc1976 · 06-24-2013, 11:58 PM

Quote:

Originally Posted by Dr. G

Ahhh ok sorry I must have missed that, that gives you a lot of options to play with resonator placement and such. The OE is 2.25" ID as far as I am aware, I was able to kinda slide the 2.5" resonators over top of the OE piping.

I am VERY glad you brought this up....I will check what the new SS will be...might be a tad bigger

triggz · 06-25-2013, 12:00 AM

Why don't you go with aluminum piping? It's much lighter and it gives a better sound IMO over steel.

robc1976 · 06-25-2013, 12:09 AM

Quote:

Originally Posted by triggz

They may look like mufflers but they don't have the wool or whatever that material is inside. I doubt it would tone it down. Resonators don't tone down exhausts, it just gets rid of the really loud noises (rasp). I honestly think itll sound awesome.

I update first post.....going to order now....should I go with 2.5" or 2.25"?

robc1976 · 06-25-2013, 12:09 AM

Quote:

Originally Posted by triggz

Why don't you go with aluminum piping? It's much lighter and it gives a better sound IMO over steel.

Where can I get it in a kit?

robc1976 · 06-25-2013, 12:11 AM

Quote:

Originally Posted by Dr. G

The ultra quiets are like the bottle styled reso's on steroids, they should do a very good job at cleaning up rasp and shouldn't add any restriction to flow. The in cabin sound will most likely become muffled at low rpm, I'm not sure if that's a good thing or bad thing for you haha. I kinda miss the growl in the cabin I had before using resonators.

Resonator Size: 4.5" x 6.75" Oval Body, 10" Long
Overall Length: 14"
That's the specs if you hadn't already looked them up.

Are you doing the welding yourself or will you be having to pay labour to mess around with the setup?

Professional shop!

06-24-2013, 09:10 PM	#23
E90Company Major General 198 Rep 6,136 Posts Drives: Car Join Date: Mar 2012 Location: FL iTrader: (2)	Is that first video with your RB's or stock turbos?
	Appreciate 0 Quote

06-24-2013, 09:44 PM	#26
135Pats Major General 461 Rep 6,478 Posts Drives: A few BMWs Join Date: May 2012 Location: Maryland iTrader: (3)	Meisterschaft race FTW. But i'm biased.
	Appreciate 0 Quote

06-24-2013, 11:02 PM	#29
R.G. Captain 236 Rep 885 Posts Drives: Isetta Join Date: Jan 2013 Location: In my sub conscious iTrader: (12)	__________________ DocRace 6266 E92. M8 comp coupe, X5m
	Appreciate 0 Quote

06-24-2013, 11:31 PM	#31
longliven54 Lieutenant 14 Rep 455 Posts Drives: 2007 335i e90 auto Join Date: Jan 2011 Location: victoria iTrader: (6)	a local member has resonated dps, 2 resonators in place of secondaries + muffler delete. it sounds very nice. very minimal drone or rasp. i personally have electric cutouts. i have e-bay exhaust piping(painted black to prevent any possible rust) with stock muffler with cutouts rite before my resonators. quiet but beefy sounding for cruising around. cutouts for when i m out having fun and dont care about drone or rasp. been running this setup for about 3years now. __________________ JB4 G5 / VRSF IC / STETT CAI / GREDDY / custom exhaust / iRotora cross drilled rotots / snow stage 3 meth / 19" iForged senekas / upgraded speakers n CF woofer box / M3 bits/ DINAN camber plates/ KONI/ megan racing toe arm/ supreme power lowering perch
	Appreciate 0 Quote

06-24-2013, 11:38 PM	#33
robc1976 DIYER 637 Rep 5,521 Posts Drives: E90 335i Join Date: Mar 2012 Location: Illinois iTrader: (14)	I wonder if I should get the 3" diameter inlet/outlet on the resonators so they can slide over the exhaust for ease of welding? Any thoughts? __________________ JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
	Appreciate 0 Quote

06-24-2013, 11:42 PM	#34
ken1137 Brigadier General 90 Rep 3,731 Posts Drives: BMW S1000XR Join Date: Jun 2011 Location: Gilbert, AZ iTrader: (7) Garage List 2009 e90 335i [6.40]	PM Cyba...maybe they can fabricate some if their new 4.0s are not 4". Subscribed for final exhaust sound __________________ BMWCCA member
	Appreciate 0 Quote

06-24-2013, 11:43 PM	#35
Dr. G Major General 288 Rep 5,064 Posts Drives: Black e92 335i Join Date: Apr 2010 Location: Brampton, Ontario iTrader: (32) Garage List e92 BMW 335i [8.84]	The ultra quiets are like the bottle styled reso's on steroids, they should do a very good job at cleaning up rasp and shouldn't add any restriction to flow. The in cabin sound will most likely become muffled at low rpm, I'm not sure if that's a good thing or bad thing for you haha. I kinda miss the growl in the cabin I had before using resonators. Resonator Size: 4.5" x 6.75" Oval Body, 10" Long Overall Length: 14" That's the specs if you hadn't already looked them up. Are you doing the welding yourself or will you be having to pay labour to mess around with the setup? __________________ JB4 / OSS Angel Eyes / Downpipes / F1-Racewerks FMIC / Custom Meth Kit / BMS DCI / ER Chargepipe / HKS BOV / BMS Meth Elbow / BMW Performance Exhaust / Carbon Fiber Inlay Quad Tips / 19" Miro 111 / Front Aero Lip / M3 Sides / VRS CSL Trunk / Mtech Rear / DD CF Quad Finned Diffuser / LCI Tails / BBK / Smoked Reflectors / F1 Euphoria LED Interior / License LED's / GT 5000k Corners / 5000k HID Fogs / Air Scoops / LED Turn Signals / FK Silverline Coilovers / HPA endlinks / Vibrant Resonators / Osram CBI 5000k D1S
	Appreciate 0 Quote

06-25-2013, 12:00 AM	#41
triggz Banned 58 Rep 1,224 Posts Drives: E92 335i Join Date: Jun 2010 Location: Toronto iTrader: (2)	Why don't you go with aluminum piping? It's much lighter and it gives a better sound IMO over steel.
	Appreciate 0 Quote