Silicone Vacuum Line Replacement

tc535i · 05-21-2014, 12:33 PM

Great thread, I'm definitely going to have to check mine out since I'm at 75k

Dmacc · 05-21-2014, 04:07 PM

Quote:

Originally Posted by secretsquirrel

This thread is awesome and should be stickied (particularly for the pictures and the color coded lines). There are a lot of us who are in need of this maintenance.

+1

gcbm · 06-23-2014, 01:56 AM

Hi Guys,
Had to remove the vacuum canister on my N54 (135i) but forgot to mark the top vacuum lines (did the bottom one though).

First question is can these be put the wrong way around and if so what are the consequences?

I though the attached diagrams would solve the issue but the realoem one shows the pipes to the top of the canister in the opposite orientation to the one in the photo. Can anyone clarify this please?

cheers,
Ron

Quote:

Originally Posted by BlackBB6

When you see how easy they are to identify, you'll wonder why you didn't do it sooner. The longer green and red sections are the ones that run to the wastegates. The lines are held in with clips you'll have to free them from, similar to the one in the middle of the blue section.

Yes, I know my engine bay is dirty, and I the oil housing gasket is going to be replaced next week.

Ingeniator · 06-23-2014, 02:16 AM

They are both the same. There will be 0 effect to swapping them unless there is a leak in the lines etc then a wastage rattle issue may move to the other turbo. This is unlikely though as the solenoids are tied together on the actuator side.

djpeetur · 07-05-2014, 05:01 PM

How did everyone get to the rear wg nipple. ? Should I go
From underneath ?

rooringhusky · 07-05-2014, 05:18 PM

Quote:

Originally Posted by djpeetur

How did everyone get to the rear wg nipple. ? Should I go
From underneath ?

I got to mine from the top. You can feel the metal nipple on the rear wastegate actuator. It is all done by feel, you will have no way to visually see it.

gtaccord · 07-05-2014, 05:25 PM

Quote:

Originally Posted by rooringhusky

I got to mine from the top. You can feel the metal nipple on the rear wastegate actuator. It is all done by feel, you will have no way to visually see it.

+1

fl0wmastr · 07-10-2014, 02:26 AM

If I am getting oem vacuum tubes based off this pic, I should get
3 7s
1 5
1 6
1 8
Right?
What part is that middle piece in blue?

Quote:

Originally Posted by BlackBB6

gzim335 · 07-10-2014, 03:23 AM

what you mean?just replace n cut by measuring old hose they all the same 3.5mm

djpeetur · 07-10-2014, 11:48 AM

i would get 12ft instead of 10ft. i did all mine on the left side. plus the right side. intake mani and brake booster line. i change all my line, got a charge pipe and bov. and still getting 30ff. Did a smoke test but couldlnt find the leak. replacing pressure converter tommorw . my car is stock, no tune

fl0wmastr · 07-10-2014, 12:50 PM

My service advisor said I need 4 8s which totals to 12ft and Comes uncut.
My service advisor claims these tubes are causing wastegate rattle. If I replace w BMW oem lines and wastegate still rattles I will qualify for new turbos as part of 82k mile extended warranty class action lawsuit / recall

tc535i · 07-10-2014, 12:52 PM

does anybody know how to test solenoid function?

BlackBB6 · 07-10-2014, 02:02 PM

Quote:

Originally Posted by fl0wmastr

My service advisor said I need 4 7s which totals to 12ft and Comes uncut.
My service advisor claims these tubes are causing wastegate rattle. If I replace w BMW oem lines and wastegate still rattles I will qualify for new turbos as part of 82k mile extended warranty class action lawsuit / recall

Exactly what I had to do to get my turbos replaced. Just buy 12ft and as you remove the old hose, cut the new hose to match it's length. The blue piece is same hose as the rest. I color coded it so it would be easier to spot in the pictures.

For the parts marked 5 and 6, there is a plastic connector in between those yellow sections of hose. I would just replace it with one long hose.

fl0wmastr · 07-10-2014, 02:21 PM

Sorry I mean 4 8s the thicker tubes bc 5 and 6 is just thick n think combo. Will the thicker tubes be OK for fitment? I imagine they will shield better. Or is service advisor just being lazy only quoting me 1 part?

BlackBB6 · 07-10-2014, 02:46 PM

Quote:

Originally Posted by fl0wmastr

Sorry I mean 4 8s the thicker tubes bc 5 and 6 is just thick n think combo. Will the thicker tubes be OK for fitment? I imagine they will shield better. Or is service advisor just being lazy only quoting me 1 part?

On 5 and 6, the thin part that isn't colored yellow is actually hard plastic, instead of hose-plastic-hose, eliminate the plastic and just use a hose all the way through.

One hose size for all of it, same thickness.

CBR6n335Iracer · 07-10-2014, 05:32 PM

Quote:

Originally Posted by robc1976

15-20 so you have a bit left over...depends if you are replacing them all or just main ones. I uses titanium laced silicone...best I have used!

Rob, where did you get these titanium laced silcone lines?
thank you

robc1976 · 07-10-2014, 05:47 PM

Quote:

Originally Posted by CBR6n335Iracer

Rob, where did you get these titanium laced silcone lines?
thank you

Here ya go

http://www.verociousmotorsports.com/...ld-by-the-Foot

randythedrummer · 07-11-2014, 04:55 AM

Quote:

Originally Posted by robc1976

Quote:

Originally Posted by CBR6n335Iracer

Rob, where did you get these titanium laced silcone lines?
thank you

Here ya go

http://www.verociousmotorsports.com/...ld-by-the-Foot

+1 on the Verocious hose. Great stuff! I replaced all my OEM hoses with the 3.5mm size. Ended up reusing the hard plastic pieces that sit over top of the valve cover. No issues there.

TC335 · 07-12-2014, 12:42 PM

Quote:

Originally Posted by CBR6n335Iracer

Rob, where did you get these titanium laced silcone lines?
thank you

I have 12 feet of this lines if you want them at a very discounted price as I didn't end up using them.

citg0 · 07-12-2014, 12:54 PM

Quote:

Originally Posted by maximum96

http://www.verociousmotorsports.com/...Cured-Silicone

Bump for this. Bought 14ft of this when I did mine on my old 335, and had about 6" left (with some minor mistakes in cutting made). 15' should be perfect to keep some leftover.

Snypa · 07-14-2014, 12:41 AM

Great thread. I too need to prob replace some vacuum hose as I keep getting the 30FF on WOT. I also have the wonderful WG rattle.

djpeetur · 07-14-2014, 01:08 AM

Quote:

Originally Posted by Snypa

Great thread. I too need to prob replace some vacuum hose as I keep getting the 30FF on WOT. I also have the wonderful WG rattle.

Are you stock snypa? I have exact same situation.

05-21-2014, 12:33 PM	#23
tc535i Lieutenant Colonel 222 Rep 1,818 Posts Drives: 2007 335i, 2001 330i, 1995 M3 Join Date: Sep 2013 Location: West Los Angeles iTrader: (1)	Great thread, I'm definitely going to have to check mine out since I'm at 75k
	Appreciate 0 Quote

06-23-2014, 02:16 AM	#26
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	They are both the same. There will be 0 effect to swapping them unless there is a leak in the lines etc then a wastage rattle issue may move to the other turbo. This is unlikely though as the solenoids are tied together on the actuator side. __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
	Appreciate 0 Quote

07-05-2014, 05:01 PM	#27
djpeetur Major 272 Rep 1,040 Posts Drives: F80 \| G80 Join Date: Jan 2008 Location: Plano TX iTrader: (23)	How did everyone get to the rear wg nipple. ? Should I go From underneath ?
	Appreciate 0 Quote

07-10-2014, 03:23 AM	#31
gzim335 Captain 149 Rep 966 Posts Drives: e92 m3 Join Date: Feb 2011 Location: staten island ny iTrader: (4) Garage List 2007/1 e90 335i [2.00]	what you mean?just replace n cut by measuring old hose they all the same 3.5mm __________________ e92 m3 dct gintani stage 2+ full ethanol custom pulley and meth kw clubsport,ap racing radical,volk te37sl,akrapovic rear,recaro profi xl,voltphreaks battery
	Appreciate 0 Quote

07-10-2014, 11:48 AM	#32
djpeetur Major 272 Rep 1,040 Posts Drives: F80 \| G80 Join Date: Jan 2008 Location: Plano TX iTrader: (23)	i would get 12ft instead of 10ft. i did all mine on the left side. plus the right side. intake mani and brake booster line. i change all my line, got a charge pipe and bov. and still getting 30ff. Did a smoke test but couldlnt find the leak. replacing pressure converter tommorw . my car is stock, no tune
	Appreciate 0 Quote

07-10-2014, 12:50 PM	#33
fl0wmastr Private First Class 92 Rep 130 Posts Drives: e92 335i Coupe w M Sport Kit Join Date: Jun 2012 Location: Tampa, FL iTrader: (0) Garage List 07 BMW 335i [10.00]	My service advisor said I need 4 8s which totals to 12ft and Comes uncut. My service advisor claims these tubes are causing wastegate rattle. If I replace w BMW oem lines and wastegate still rattles I will qualify for new turbos as part of 82k mile extended warranty class action lawsuit / recall Last edited by fl0wmastr; 07-10-2014 at 02:22 PM..
	Appreciate 0 Quote

07-10-2014, 12:52 PM	#34
tc535i Lieutenant Colonel 222 Rep 1,818 Posts Drives: 2007 335i, 2001 330i, 1995 M3 Join Date: Sep 2013 Location: West Los Angeles iTrader: (1)	does anybody know how to test solenoid function?
	Appreciate 0 Quote

07-10-2014, 02:21 PM	#36
fl0wmastr Private First Class 92 Rep 130 Posts Drives: e92 335i Coupe w M Sport Kit Join Date: Jun 2012 Location: Tampa, FL iTrader: (0) Garage List 07 BMW 335i [10.00]	Sorry I mean 4 8s the thicker tubes bc 5 and 6 is just thick n think combo. Will the thicker tubes be OK for fitment? I imagine they will shield better. Or is service advisor just being lazy only quoting me 1 part?
	Appreciate 0 Quote

07-14-2014, 12:41 AM	#43
Snypa Captain 40 Rep 656 Posts Drives: Like a mahdman ! Join Date: May 2013 Location: I-75 iTrader: (3)	Great thread. I too need to prob replace some vacuum hose as I keep getting the 30FF on WOT. I also have the wonderful WG rattle. __________________ SUPER SLOW E90
	Appreciate 0 Quote