MMM335's Build/Daily

MMM335 · 09-02-2017, 12:27 PM

getting it re-trimmed ill paint the interior pieces until i source a car with black handles etc... i have visors and most to swap over.. going to just vinyl paint my gasket i think.

sort of contradicting myself here from my previous post haha

DR-JEKL · 09-03-2017, 01:14 AM

Quote:

Originally Posted by MMM335

getting it re-trimmed ill paint the interior pieces until i source a car with black handles etc... i have visors and most to swap over.. going to just vinyl paint my gasket i think.

sort of contradicting myself here from my previous post haha

Looking fwd to seeing how it turns out!

I created a thread on here which has all the headliner part numbers etc if you need that info!

Are you just going to get a local source for the anthracite?

MMM335 · 09-03-2017, 11:18 AM

got a mate doing it whos pretty good at upholstery.

Socket · 09-04-2017, 08:24 AM

I put up a DIY that walks you through swapping out the headliner when you need it. Advance search Socket DIY

MMM335 · 09-04-2017, 09:41 AM

I already got it all out was fairly straight forward, except the getting it out of the car part, cheers, still gotta get round to the moon roof though

MMM335 · 09-05-2017, 07:46 PM

m3 cable guide ,had to undo original wiring harness and re-do

BSG335 · 09-06-2017, 01:17 AM

Looks great! Obv that's with the M3 cowling... was that a costly or difficult mod? How are you finding it after changing the cowling? That the same as in Socket 's right?

MMM335 · 09-06-2017, 01:07 PM

costly somewhat difficult not really, way worth it but, engines easier to work with always a plus with these things lol.

Just bought NBT EVO ID6 and sold my CCC HU for $600 winning.

next injectors for sharp mani and aic6 controller from dat335

Socket · 09-10-2017, 09:12 AM

Quote:

Originally Posted by BSG335

Looks great! Obv that's with the M3 cowling... was that a costly or difficult mod? How are you finding it after changing the cowling? That the same as in Socket 's right?

$415 for the cowl... easy mod to do, just take off the stock cowl and fit the M3 cowl..... need to route the wiring through the holder... probably about 30 mins work

MMM335 · 11-05-2017, 01:29 AM

Havent updated this in quite a while.. been flat out.

^ nbt evo id6 installed.... wire management is the hardest to do that and bimmer retrofits dumb instructions.

^ m5 i done for a job rocking the new pc runs everything through icom so quick.

Also got a custom charge pipe made, my manifold on with ls7 injectors... will post more pictures this afternoon

Desertraptor · 11-06-2017, 12:12 AM

Quote:

Originally Posted by MMM335

Havent updated this in quite a while.. been flat out.

^ nbt evo id6 installed.... wire management is the hardest to do that and bimmer retrofits dumb instructions.

^ m5 i done for a job rocking the new pc runs everything through icom so quick.

Also got a custom charge pipe made, my manifold on with ls7 injectors... will post more pictures this afternoon

Might want to resize these images.

EB89 · 11-06-2017, 04:02 AM

Quote:

Originally Posted by Desertraptor

Might want to resize these images.

Why

Ibn Shraim · 01-29-2019, 01:54 AM

Quote:

Originally Posted by MMM335

^ 7 inch installed, tight fit with the Active Cruise Control

^ DCI's waiting on my blow off valve now to be posted by VRSF to install my upper charge pipe

Next is Pumping my guards, Catless DP's, CSL Trunk/Spoiler.

amongst a few other maintenance things i find the car requires.

Hey,

May I ask how you managed to fit the FMIC with the ACC in the way?

I'm in the exact same situation and considering trimming the lower bracket to make it fit.

Socket · 01-29-2019, 01:56 AM

Quote:

Originally Posted by Pablo_N54

Hey,

May I ask how you managed to fit the FMIC with the ACC in the way?

I'm in the exact same situation and considering trimming the lower bracket to make it fit.

Yep 7" will need trimming afaik

Aus335iguy · 01-31-2019, 05:25 AM

Haven't seen MMM335 around for a while now....

:

MMM335 · 01-11-2022, 06:07 AM

Im back got a new set of upgraded twins going on, its been decomissioned for a while stuck in Tweed Heads, lost the key blew the turbos... will update this topic and fix all the pics soon

Socket · 01-12-2022, 01:14 AM

Quote:

Originally Posted by MMM335

Im back got a new set of upgraded twins going on, its been decomissioned for a while stuck in Tweed Heads, lost the key blew the turbos... will update this topic and fix all the pics soon

Welcome back mate

Brule · 01-12-2022, 03:06 AM

I remember this thread. A shiny precision turbo was going on it.

Aus335iguy · 01-17-2022, 04:23 AM

Oh hells yeah! Welcome back MMM335

Socket · 01-20-2022, 05:27 AM

and hes gone .............. lol

09-02-2017, 12:27 PM	#419
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	getting it re-trimmed ill paint the interior pieces until i source a car with black handles etc... i have visors and most to swap over.. going to just vinyl paint my gasket i think. sort of contradicting myself here from my previous post haha __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl Last edited by MMM335; 09-02-2017 at 12:47 PM..
	Appreciate 0 Quote

09-03-2017, 11:18 AM	#421
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	got a mate doing it whos pretty good at upholstery. __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

09-04-2017, 08:24 AM	#422
Socket Lieutenant General 4682 Rep 11,956 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	I put up a DIY that walks you through swapping out the headliner when you need it. Advance search Socket DIY
	Appreciate 0 Quote

09-04-2017, 09:41 AM	#423
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	I already got it all out was fairly straight forward, except the getting it out of the car part, cheers, still gotta get round to the moon roof though __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

09-05-2017, 07:46 PM	#424
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	m3 cable guide ,had to undo original wiring harness and re-do __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

09-06-2017, 01:17 AM	#425
BSG335 Driving in the slow lane 32 Rep 210 Posts Drives: E92 N54 Join Date: Aug 2017 Location: Sydney iTrader: (0)	Looks great! Obv that's with the M3 cowling... was that a costly or difficult mod? How are you finding it after changing the cowling? That the same as in Socket 's right?
	Appreciate 0 Quote

09-06-2017, 01:07 PM	#426
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	costly somewhat difficult not really, way worth it but, engines easier to work with always a plus with these things lol. Just bought NBT EVO ID6 and sold my CCC HU for $600 winning. next injectors for sharp mani and aic6 controller from dat335 Attached Images __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

11-05-2017, 01:29 AM	#428
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	Havent updated this in quite a while.. been flat out. ^ nbt evo id6 installed.... wire management is the hardest to do that and bimmer retrofits dumb instructions. ^ m5 i done for a job rocking the new pc runs everything through icom so quick. Also got a custom charge pipe made, my manifold on with ls7 injectors... will post more pictures this afternoon __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

01-31-2019, 05:25 AM	#433
Aus335iguy Colonel 656 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Haven't seen MMM335 around for a while now.... : __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

01-11-2022, 06:07 AM	#434
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	Im back got a new set of upgraded twins going on, its been decomissioned for a while stuck in Tweed Heads, lost the key blew the turbos... will update this topic and fix all the pics soon __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

01-12-2022, 03:06 AM	#436
Brule Brigadier General 840 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	I remember this thread. A shiny precision turbo was going on it.
	Appreciate 0 Quote

01-17-2022, 04:23 AM	#437
Aus335iguy Colonel 656 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Oh hells yeah! Welcome back MMM335 __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

01-20-2022, 05:27 AM	#438
Socket Lieutenant General 4682 Rep 11,956 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	and hes gone .............. lol
	Appreciate 0 Quote