[Clammy]

Well... I'm having no luck. Following the NCS_DIY.pdf I can get as far as getting the initial FSW_PSW.TRC file created, and the VIN and FA show up in NCS Expert, but that's it. After that I have a number of what appear to be error messages that come up. Can't say for sure, because I don't understand German... I think they're communication errors, so I'm guessing the cable I bought isn't working for me...

[pweber84]

Originally Posted by Clammy

Well... I'm having no luck. Following the NCS_DIY.pdf I can get as far as getting the initial FSW_PSW.TRC file created, and the VIN and FA show up in NCS Expert, but that's it. After that I have a number of what appear to be error messages that come up. Can't say for sure, because I don't understand German... I think they're communication errors, so I'm guessing the cable I bought isn't working for me...

Write this error here.

[Cuticuti]

******84 ,

I just got cable today, when i follow the step #22, i do not see the "Expertmode". Options are: "Default, EXPERT MAN, Revtor's NCS Expert Profile, and Expertenmodus".

When i set the setp #9, I don't see the receive and transmit buffers, it only has USB transfer size = 16 as the smallest option.

Do i miss anything?

[muhanda1]

could i have the DIY pdf pl.

[Najt]

here you go:

http://www76.zippyshare.com/v/87164756/file.html

[Cuticuti]

Hi ******84,

First, I like to thank you for your help to flash my TCU with Alpina B3.

I have another question regarding the DIY to code the famous digital speed. When I start NCS EXPERT starting on step 19, I select Expertenmodus on step 22 > step 24 with pw = repxet, I never see the step 25 gui, therefore, I never pass step 25.

Do you know what’s wrong?

[pweber84]

Originally Posted by Cuticuti

Hi ******84,

First, I like to thank you for your help to flash my TCU with Alpina B3.

I have another question regarding the DIY to code the famous digital speed. When I start NCS EXPERT starting on step 19, I select Expertenmodus on step 22 > step 24 with pw = repxet, I never see the step 25 gui, therefore, I never pass step 25.

Do you know what’s wrong?

I don't even know what DIY you follow with.
In version 4.01 you have to load profile (EXPERT MAN), not edit. Pofiles are in link I've shared you.

[Najt]

Originally Posted by Cuticuti

Do you know what’s wrong?

I think the password is wrong. If you're using NCSExpert 4.0.1 .
If you are using the attached ncsexpert from junior the passwort is repxet.

[Najt]

Hi, I've tried to get rid of the SOS call system failure warning. I've tried to removed the $639 from VO, but , there is none.

And when I've tried to read TCUM and to change the attribute E_CALL_HARDKEY_FITTED to nicht_aktiv , I get error:

Error in CABD! Look at CABI.ERR and ERROR.LOG!
COAPI-2020: no answer from ECU
IFH-0009: NO RESPONSE FROM CONTROLUNIT.

so why there is still the bmw assist failure warning, when there is no $639 code? It seems that the ecu is dead. Since I cant even add the +TELD attribute to VO.

any good idea? except change the fu_king ecu?

//EDIT: problem solved

[uber]

Hi, could someone send me the link to the DIY / Program files? Thanks so much.

[Najt]

have you tried link of #4518 ... its about three comment over your question.

[Cuticuti]

Originally Posted by ******84

I don't even know what DIY you follow with.
In version 4.01 you have to load profile (EXPERT MAN), not edit. Pofiles are in link I've shared you.

Hi

Yes, i sucessfully coded the famous digital speed now. I did not have to create a profile since it was created by ******84. Again, thank you ******84 and this forum to help me to get started.

I am still trying to program the adaptive headlight module without success. I replaced the new AHL module (bought from dealer) and coded per instruction (step A&B) in http://www.e90post.com/forums/showthread.php?t=735874
The replacement AHL module still does not work.

[pweber84]

Originally Posted by Cuticuti

Hi

Yes, i sucessfully coded the famous digital speed now. I did not have to create a profile since it was created by ******84. Again, thank you ******84 and this forum to help me to get started.

I am still trying to program the adaptive headlight module without success. I replaced the new AHL module (bought from dealer) and coded per instruction (step A&B) in http://www.e90post.com/forums/showthread.php?t=735874
The replacement AHL module still does not work.

It should be very easy to recode, I mean very very easy

[uber]

Originally Posted by Najt

have you tried link of #4518 ... its about three comment over your question.

Hi I saw that post, but wasn't aware it was the program. I thought it was just a link to the DIY.

edit: It is just a link to the DIY.

[Najt]

ouch sorry, I havent seeen you need also the files. here you go:

http://www31.zippyshare.com/v/29064924/file.html

[Najt]

Hi guys. sorry for OT. Which diag can tell me also the date of the error? Inpa only says miliage.

[muhanda1]

Finally my cable arrived from one stop electronics. It took only 2 months.
Firstly appreciate your invaluable input to the forum members like me.

I was trying to code BC_DIGITAL_V as shown in the DIY pdf.
I do not get to select Expertmode in step 22. Instead I get 2 lines of FSW PSW MAN (see attached doc). When I tried for the first time Expertmode was there.
Then I choose the second line of FSW PSW MAN in step 22 assuming it is the Expertmode. It allowed me to go all the way up to step 60. Then when I open the FSW PSW.TRC file it does not look like what's in step 65. There is no BC_DIGITAL_V. Please see attached FSW PSW.TRC text file. What have I done wrong. Help much appreciated.

[pweber84]

Originally Posted by muhanda1

Finally my cable arrived from one stop electronics. It took only 2 months.
Firstly appreciate your invaluable input to the forum members like me.

I was trying to code BC_DIGITAL_V as shown in the DIY pdf.
I do not get to select Expertmode in step 22. Instead I get 2 lines of FSW PSW MAN (see attached doc). When I tried for the first time Expertmode was there.
Then I choose the second line of FSW PSW MAN in step 22 assuming it is the Expertmode. It allowed me to go all the way up to step 60. Then when I open the FSW PSW.TRC file it does not look like what's in step 65. There is no BC_DIGITAL_V. Please see attached FSW PSW.TRC text file. What have I done wrong. Help much appreciated.

Did you read out your KOMBI module?
You have to use profile with MAN file manipulation. Which version of NCS exper do you use? Email me I will share you already made profile EXPERT MAN.

[Najt]

is it normal that i have in some ecu more than one option???
eg. MASK:

AMBANDS
aktiv
FILTER_FZG_BLOCK_1
e87_hifi
e90_hifi
e70_hifi
pl2_hifi
e93_hifi
e92_hifi
FILTER_FZG_BLOCK_2
e87_hifi
e90_hifi
e70_hifi


ONLINE_DISABLE_CONTENT
content_enable
ONLINE_DISABLE_VMAX
disable_us
disable_aus
standard
GALLON_VAL
uk
MP3
aktiv
AMBAND_KW
aktiv

[pweber84]

Originally Posted by Najt

is it normal that i have in some ecu more than one option???
eg. MASK:

AMBANDS
aktiv
FILTER_FZG_BLOCK_1
e87_hifi
e90_hifi
e70_hifi
pl2_hifi
e93_hifi
e92_hifi
FILTER_FZG_BLOCK_2
e87_hifi
e90_hifi
e70_hifi


ONLINE_DISABLE_CONTENT
content_enable
ONLINE_DISABLE_VMAX
disable_us
disable_aus
standard
GALLON_VAL
uk
MP3
aktiv
AMBAND_KW
aktiv

You mean different models? It is absolutely normal.

[Najt]

not only model... I think that also in KOMBI or CAS, there is somehing like:

Getriebe gange
6-gange
8-gange

but i have only 6 speed manual

[muhanda1]

Originally Posted by ******84

Did you read out your KOMBI module?
You have to use profile with MAN file manipulation. Which version of NCS exper do you use? Email me I will share you already made profile EXPERT MAN.

I am using V3.1.0 NCSexper. I read only from CAS module. Where can I download the V4 NCSexper? Thanks