[prfraczek]

Hello,
Could someone have a look at my FSW code, please?
FSW

When i turn DRL ON (iDrive) then DRL got 10.87V but when add beam then voltage drops to 3.7
Is any way to setup this to drop to 0V (or to proper 13.7V?)
also need to cancel the errors.
I'm trying to swap H8 bulb with HID Xenon but when is dark this HID will be to bright with beam lights. Also when valtage drops to 3.7V then relays are clicking. TA

this is what I thought to change but not sure:
KALTUEBERWACHUNG_SL_V_L -> nicht_aktiv
KALTUEBERWACHUNG_SL_V_R -> nicht_aktiv

WARMUEBERWACHUNG_SL_V_L -> nicht_aktiv
WARMUEBERWACHUNG_SL_V_R -> nicht_aktiv

FEHLERMELDUNG_CC_SL_V_L -> nicht_aktiv
FEHLERMELDUNG_CC_SL_V_R -> nicht_aktiv

PWM_ANSTEUERUNG_SL_V_AL -> wert_02
PWM_ANSTEUERUNG_SL_V_FL -> wert_02

[pepsih]

i don't want to make a new thread but anyone know what is the stock voltage for Angel Eyes,and which line is it in frm2
as i remember i only messed up with(and the voltage is currently set at
Pwm_sl_v DRL Wert_2 = (2D,0C) = 13,7V
Pwm_sl_v_bei_aktiven_al Wert_2 = (2D,0C) = 13,7V
Pwm_sl_v_bei_aktiven_fl Wert_2 = (2D,0C) = 13,7V

PWM_RL_BL_1_FKT_SL F4 09 --> [11,2V]
PWM_RL_BL_1_FKT_PARKL 00V
.
the AE keep burning...
actually not the led but a component is burning.

[Dominic_M]

That feels great.. Thank you all for your hard work here. i was able to code my first change into my car.
I did the LCI retrofit to my 08 E90 this past weekend.
I order my cable a week prior..
After doing some reading here and a DIY instructions I was able to get my code clear for the LCI warning...

Thank you all..

Now i need to code my alarm. I have had it installed for over two months now..
I am kind of sceptical as i have to add a new module or somthing.. I am not sure.. I have to keeeeep reading....

thanks again.

[maxiller]

Originally Posted by AW128i

Have you tried this? Could prove interesting! I believe the current X5 uses the fog lights as cornering lights.

325'11 - doesn't work

[georgelb]

Originally Posted by Mick64

Thanks again for your help. I have updated my SP-Daten files with version 49 from the link that you sent me. Everything works fine apart from I am unable to read 6 of the modules. CID, EKP, EPS, MCIC, TCUM, ZBE. The only one I am really disappointed about is the MCIC module, as I was hoping to enable the automatic day/night mode for the SatNav. Do you think that it is possible that I require an even later version of the SP-Daten files?

Were you able to resolve this? I'm having the same problem, but with different modules (Kombi, NFRM) and am using the 49.7 Daten files. I did have my car updated earlier this month to get the most recent DME programing prior to a pro-tune.

[edwinm3]

Originally Posted by Dominic_M

That feels great.. Thank you all for your hard work here. i was able to code my first change into my car.
I did the LCI retrofit to my 08 E90 this past weekend.
I order my cable a week prior..
After doing some reading here and a DIY instructions I was able to get my code clear for the LCI warning...

Thank you all..

Now i need to code my alarm. I have had it installed for over two months now..
I am kind of sceptical as i have to add a new module or somthing.. I am not sure.. I have to keeeeep reading....

thanks again.

Dominic car looks great, coding is pretty easy, I'm so sorry I didnt get back to you, I've been crazy busy

[edwinm3]

Originally Posted by wepio

I followed the method courtesy of the BMW Coding forum, under the Wiki tab. It was straight forward and really easy. All it requires is NCS Dummy and Expert.

^This

[Dominic_M]

Folding mirrors are the bomb!!!

[Dominic_M]

Originally Posted by edwinm3

Dominic car looks great, coding is pretty easy, I'm so sorry I didnt get back to you, I've been crazy busy

Hey man,
It's cool... I figure it out after reading all kinds of stuff here...
I just finished the alarm, folding mirrors, fob windows close and wipers finish cycle...

[Wastegate]

Originally Posted by toni8284

And when I did the car when edit profile under NCS. typed in the password, it has some green images, 6 are green and 1 is grey (ZCSUT).

Do you know why ZCSUT is not green? Anyone had the same issue?

I have the same issue. I don't know what happened: at first it was green.

Did you find a solution?


I have also another problem. KOMFORTOEFFNUNG_FB is set to aktive in CAS module but I cannot open windows with key. Why?

[pweber]

Originally Posted by Wastegate

I have the same issue. I don't know what happened: at first it was green.

Did you find a solution?


I have also another problem. KOMFORTOEFFNUNG_FB is set to aktive in CAS module but I cannot open windows with key. Why?

Try this KOMFORTSCHLIESSUNG_FB

[Wastegate]

Originally Posted by ******

Try this KOMFORTSCHLIESSUNG_FB

It is set to aktiv too.
For me are factory settings. I only read CAS module and both KOMFORTOEFFNUNG_FB and KOMFORTSCHLIESSUNG_FB are set to aktiv.

[Mick64]

Originally Posted by georgelb

Were you able to resolve this? I'm having the same problem, but with different modules (Kombi, NFRM) and am using the 49.7 Daten files. I did have my car updated earlier this month to get the most recent DME programing prior to a pro-tune.

No I'm afraid not. I suspect the Daten files are out of date, but I am unable to confirm this. Still hoping someone posts a solution. If you have any luck, please post here. Thanks.

[Wastegate]

Originally Posted by yucki68

You can check your i-level with Tool32.

Load E60.prg et and execute JOB: I_STUFE_LESEN

Then, post a snapshot of the result here and then i can say you what daten you need.

I have an empty jobs list. Why?

[pepsih]

Is the alpina TCU flash work on all n54? (135,335,535) ??? of course the once built after 03/07
how about the n55?

[pweber]

Originally Posted by pepsih

Is the alpina TCU flash work on all n54? (135,335,535) ??? of course the once built after 03/07
how about the n55?

Alpina TCU flash works with N54 and N55, X1, X3 35i, 135,335 but not with 535 - there is a different transmission.

[pepsih]

Originally Posted by ******

Alpina TCU flash works with N54 and N55, X1, X3 35i, 135,335 but not with 535 - there is a different transmission.

thanks a lot for the info

[TheM3Boy]

Recently I bought the onestopelectronics cable. Aside of the fact that it took forever to arrive from China I had no issues with the order. The package contained the cable and an adapter (the black box on the picture). Does anyone know what is the adapter for?



Also I got the Standard tools 212 and installed them on a windows 7 machine but when I open the INPA tool I don't see the model numbers on the bottom as shown in the tutorials. The two black dots indicate successful connection but it kind of ends there. Any clues?

[PichaDis11]

Originally Posted by TheM3Boy

Recently I bought the onestopelectronics cable. Aside of the fact that it took forever to arrive from China I had no issues with the order. The package contained the cable and an adapter (the black box on the picture). Does anyone know what is the adapter for?



Also I got the Standard tools 212 and installed them on a windows 7 machine but when I open the INPA tool I don't see the model numbers on the bottom as shown in the tutorials. The two black dots indicate successful connection but it kind of ends there. Any clues?

You are missing files in INPA/sgdat folder. I am no expert but that is what seems to happen everytime that folder is empty. Should have about 600 or so files.

[pweber]

I sent you PM, TheM3Boy.

[TheM3Boy]

Just got it. I will try it today and let you know.
Thanks a lot ******!

[TheM3Boy]

I was able to select the chasis now but I still cannot read any data from the vehicle. I get an error message like this: