DP Fix for sale

z3Ro · 01-14-2022, 05:45 PM

any updates on the n55 unit?

taz2ko0 · 01-17-2022, 02:01 PM

Quote:

Originally Posted by z3Ro

any updates on the n55 unit?

Sorry nothing yet

!LEFTCOAST! · 01-21-2022, 03:39 PM

PM sent

taz2ko0 · 01-21-2022, 05:47 PM

Quote:

Originally Posted by !LEFTCOAST!

PM sent

Replied

taz2ko0 · 02-04-2022, 11:24 AM

Bump

DS3IAM · 02-08-2022, 03:39 PM

worked for my car back two years

I am just wondering if this will work for a check engine light for E90 NA? My GF car has a cat error message. Has anyone tried using a DP fix for NA car? I am assuming it should work too?

taz2ko0 · 02-08-2022, 03:46 PM

Quote:

Originally Posted by DS3IAM

worked for my car back two years

I am just wondering if this will work for a check engine light for E90 NA? My GF car has a cat error message. Has anyone tried using a DP fix for NA car? I am assuming it should work too?

I have never tried but it could as Long as you got the right pins but there is no guarantee due to the voltages.

taz2ko0 · 02-22-2022, 07:11 AM

Bump

taz2ko0 · 03-02-2022, 03:11 PM

Bump

taz2ko0 · 03-12-2022, 10:32 AM

Bump

sosiiick · 03-15-2022, 04:30 PM

I have a single turbo 335is. I plugged in the stock boost solenoids, flashed to stg0 with stock cat checked and installed your dp fix, both rear 02 are plugged back in. Every monitor has passed (cat, evap, 02 heater) except 02 sensors within the first 50 miles. I did the drive cycle and put about 200 miles on my car and the 02 is still not passing. Im not getting any 02 codes. DP fix was at ~500 ohms for the first 100 miles then I set it back some to about ~450 ohms and redrove the rest of the miles. Am I doing something wrong?

taz2ko0 · 03-15-2022, 06:11 PM

Quote:

Originally Posted by sosiiick

I have a single turbo 335is. I plugged in the stock boost solenoids, flashed to stg0 with stock cat checked and installed your dp fix, both rear 02 are plugged back in. Every monitor has passed (cat, evap, 02 heater) except 02 sensors within the first 50 miles. I did the drive cycle and put about 200 miles on my car and the 02 is still not passing. Im not getting any 02 codes. DP fix was at ~500 ohms for the first 100 miles then I set it back some to about ~450 ohms and redrove the rest of the miles. Am I doing something wrong?

Make sure you not only clear codes but reset your adaptions. If that does not work I would try setting it to the 4 o'clock position and see what you get. Keep me posted on your results.

sosiiick · 03-15-2022, 11:45 PM

Quote:

Originally Posted by taz2ko0

Make sure you not only clear codes but reset your adaptions. If that does not work I would try setting it to the 4 o'clock position and see what you get. Keep me posted on your results.

ok thanks ill reset them and redrive it

taz2ko0 · 03-21-2022, 07:55 PM

Bump

LA_BOOSTED · 04-02-2022, 06:38 PM

How well does this work with Catless VRSF Dps in CA -- 2007 N54 335i -- on MHD Stg2+ E50. Flash back to stock? Put in all 91? What's process? I wanna grab one of these from you

taz2ko0 · 04-04-2022, 04:09 PM

Quote:

Originally Posted by LA_BOOSTED

How well does this work with Catless VRSF Dps in CA -- 2007 N54 335i -- on MHD Stg2+ E50. Flash back to stock? Put in all 91? What's process? I wanna grab one of these from you

Pm'ed

sosiiick · 04-08-2022, 10:12 AM

Quote:

Originally Posted by taz2ko0

Make sure you not only clear codes but reset your adaptions. If that does not work I would try setting it to the 4 o'clock position and see what you get. Keep me posted on your results.

I got new rear 02s also. I reset the adaptations. I drove it 100 miles on 6 oclock. no codes everything passed but 02 not ready. I drove it 60 miles on 4 oclock position. no codes everything passed but 02 not ready still. Any ideas?

I went in rechecked the install with the instructions. Everything looks to be wired correct.

taz2ko0 · 04-08-2022, 01:32 PM

Quote:

Originally Posted by sosiiick

Quote:

Originally Posted by taz2ko0

Make sure you not only clear codes but reset your adaptions. If that does not work I would try setting it to the 4 o'clock position and see what you get. Keep me posted on your results.

I got new rear 02s also. I reset the adaptations. I drove it 100 miles on 6 oclock. no codes everything passed but 02 not ready. I drove it 60 miles on 4 oclock position. no codes everything passed but 02 not ready still. Any ideas?

I went in rechecked the install with the instructions. Everything looks to be wired correct.

I would try the extreme either 7 or 3 o'clock positions to see if a code pops up if nothing happens I would switch the male black pin from position 19 to position 20 or vise versa. Reset codes and adaptions. Perform the drive cycle again. Let me know how it goes.

taz2ko0 · 04-20-2022, 11:46 AM

Bump

taz2ko0 · 04-29-2022, 08:02 AM

Happy Friday bump

taz2ko0 · 05-11-2022, 05:59 AM

Bump

taz2ko0 · 05-23-2022, 03:05 PM

Bumps

01-14-2022, 05:45 PM	#441
z3Ro Private First Class 30 Rep 130 Posts Drives: 2011 E90 335XI M-Sport Join Date: Mar 2017 Location: Bay Area iTrader: (0)	any updates on the n55 unit?
	Appreciate 0 Quote

01-21-2022, 03:39 PM	#443
!LEFTCOAST! Captain 186 Rep 884 Posts Drives: E92-SG-335i Join Date: Jan 2012 Location: SO.CAL 91750 iTrader: (21)	PM sent
	Appreciate 0 Quote

02-04-2022, 11:24 AM	#445
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

02-08-2022, 03:39 PM	#446
DS3IAM Lieutenant 201 Rep 552 Posts Drives: E90 335 XI Join Date: Jun 2016 Location: NJ iTrader: (7)	worked for my car back two years I am just wondering if this will work for a check engine light for E90 NA? My GF car has a cat error message. Has anyone tried using a DP fix for NA car? I am assuming it should work too? __________________ 2009 335i xDrive 6MT // Black Sapphire / Cold Weather / M Sport / PDC / Premium Package / Aerodynamic Kit / Anthracite headliner / Keyless Entry / AR Design Catless Downpipe / Style 313 19" Wheels/ OEM Euro Taillights / LUX H8 160
	Appreciate 0 Quote

02-22-2022, 07:11 AM	#448
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

03-02-2022, 03:11 PM	#449
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

03-12-2022, 10:32 AM	#450
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

03-15-2022, 04:30 PM	#451
sosiiick Registered 0 Rep 3 Posts Drives: 335is Join Date: Mar 2022 Location: USA iTrader: (0)	I have a single turbo 335is. I plugged in the stock boost solenoids, flashed to stg0 with stock cat checked and installed your dp fix, both rear 02 are plugged back in. Every monitor has passed (cat, evap, 02 heater) except 02 sensors within the first 50 miles. I did the drive cycle and put about 200 miles on my car and the 02 is still not passing. Im not getting any 02 codes. DP fix was at ~500 ohms for the first 100 miles then I set it back some to about ~450 ohms and redrove the rest of the miles. Am I doing something wrong?
	Appreciate 0 Quote

03-21-2022, 07:55 PM	#454
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

04-02-2022, 06:38 PM	#455
LA_BOOSTED Private First Class 3 Rep 100 Posts Drives: 07 E92 335i Join Date: Mar 2008 Location: Los Angeles iTrader: (0) Garage List 2007 BMW 335i [0.00]	How well does this work with Catless VRSF Dps in CA -- 2007 N54 335i -- on MHD Stg2+ E50. Flash back to stock? Put in all 91? What's process? I wanna grab one of these from you
	Appreciate 0 Quote

04-20-2022, 11:46 AM	#459
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

04-29-2022, 08:02 AM	#460
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Happy Friday bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

05-11-2022, 05:59 AM	#461
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bump __________________ Bigger is always better! M4
	Appreciate 0 Quote

05-23-2022, 03:05 PM	#462
taz2ko0 Aw sh!t 120 Rep 1,029 Posts Drives: M4 Join Date: Jan 2009 Location: Naples, FL iTrader: (4)	Bumps __________________ Bigger is always better! M4
	Appreciate 0 Quote