BMW CODING success

PichaDis11 · 08-14-2013, 10:30 AM

Quote:

Originally Posted by hatton

Why in the function buttons there is no e92? Are we just supposed to select e90 as our chasis?

The E92 is based off the E90 platform.

hatton · 08-14-2013, 09:31 PM

Thanks for the previous reply.
On another note, just got my cable so I'm ready to begin set up. Have run into some problems with set up though as I am running a 64 bit Windows 8 system. If anyone has had any luck with setting up and successfully coding with Windows 8 please PM me as I don't want to brick my car. I'm following this tutorial specifically.

Ruhnie · 08-15-2013, 12:50 AM

Quote:

Originally Posted by hatton

Thanks for the previous reply.
On another note, just got my cable so I'm ready to begin set up. Have run into some problems with set up though as I am running a 64 bit Windows 8 system. If anyone has had any luck with setting up and successfully coding with Windows 8 please PM me as I don't want to brick my car. I'm following this tutorial specifically.

This tutorial is way better and works on a 64-bit OS. I got up and running in about an hour using it.

pweber · 08-15-2013, 02:26 AM

Quote:

Originally Posted by hatton

Thanks for the previous reply.
On another note, just got my cable so I'm ready to begin set up. Have run into some problems with set up though as I am running a 64 bit Windows 8 system. If anyone has had any luck with setting up and successfully coding with Windows 8 please PM me as I don't want to brick my car. I'm following this tutorial specifically.

Yes it does work with Windows 8 64 bit. I'm using it on my computer and everything is fine.

Let me know if you will have any questions.

i3illol · 08-15-2013, 02:57 AM

Hi guys I'm new here, thanks a lot for the brilliant informations, but I'm wondering where did the coding list go? Tried to open the link on the first page, but it says "Gadgets have been deprecated."?

GarlicBread · 08-15-2013, 08:12 AM

Quote:

Originally Posted by i3illol

Hi guys I'm new here, thanks a lot for the brilliant informations, but I'm wondering where did the coding list go? Tried to open the link on the first page, but it says "Gadgets have been deprecated."?

Send me your email in a PM I'll email it to you

Ruhnie · 08-15-2013, 10:24 AM

Quote:

Originally Posted by i3illol

Hi guys I'm new here, thanks a lot for the brilliant informations, but I'm wondering where did the coding list go? Tried to open the link on the first page, but it says "Gadgets have been deprecated."?

This link? It opens fine for me, so you may have some setting messed up in your google account.

i3illol · 08-16-2013, 01:38 AM

Quote:

Originally Posted by Ruhnie

This link? It opens fine for me, so you may have some setting messed up in your google account.

agh you are right lol it opens fine on my other computer with no google account logged in. Thanks

Ruhnie · 08-16-2013, 02:42 AM

Quote:

Originally Posted by i3illol

agh you are right lol it opens fine on my other computer with no google account logged in. Thanks

LOL so I just opened it (or tried to) on my home computer and get the same error...so something funky is going on

i3illol · 08-16-2013, 02:49 AM

Quote:

Originally Posted by GarlicBread

Send me your email in a PM I'll email it to you

Fanx GarlicBread! an offline version would be very useful!

i3illol@me.com

hatton · 08-16-2013, 03:49 PM

When i star expert tool and try to load a profile the only profile provided is Default?

TheM3Boy · 08-16-2013, 06:26 PM

Quote:

Originally Posted by hatton

When i star expert tool and try to load a profile the only profile provided is Default?

You need the profile files for NCS. They have to be copied to this location "NCSEXPER\PFL". You can get them from here:
http://www.e90post.com/forums/showpo...postcount=4476

hatton · 08-16-2013, 11:59 PM

Hey don't know if anyone found this yet but on thing with the NCS DIY PDF. For me (2008 335i e92), my module was actually "Kombi" instead of "cas" so watch out for that when you're trying to add the digital speedo.

rem0 · 08-17-2013, 07:04 PM

Latley i've been toying arround with coding, and thanks to this site i have successfully coded mine and my brother's car.
However, i've hit a wall now. When im trying to code my car to shortly display the cruise control speed, nothing happens.
This is how it goes:
- KOMBI module
- TEMPOMAT_SETZ_ANZ_DAUER changed from wert_01 to wert_02
Everything goes smooth, but when i use the cruise control nothing happen.
Spent several days searching google, found nothing.
All help is highly appreciated!

The car is an e 320d 2006 mod, just ask if you need any files.

u170who · 08-19-2013, 09:03 PM

If I don't have some of the options, can I add them? Also, does anyone know where I can go to learn about reading the bmw mechanical error codes? Thanks in advance, and thanks a lot for this thread, instructions and software.

muhanda1 · 08-20-2013, 05:06 PM

Is it possible to enable the horn at all times? Even when the engine is not running.

alexwhittemore · 08-20-2013, 05:33 PM

Quote:

Originally Posted by muhanda1

Is it possible to enable the horn at all times? Even when the engine is not running.

I'm quite confident when I say no, it is not, but I've also not explicitly tried. According to the wiring diagrams, the horn relay is supplied by Terminal 15, which is only active when the car is on. It's also sealed up inside the fuse box, so you couldn't (without MUCH ado and modding) wire the supply side to something else, like Terminal 30g (which, in general, will be on if you're in the car).

For what it's worth, the horn will work when the engine is not running, but the car does have to be 'on' (press the start/stop button without the brake pedal).

muhanda1 · 08-23-2013, 12:00 AM

Thanks Alex
Another car reversed on to mine at 2 occasions while mine was parked.
Horn did not work since the engine was not running.
Where could I find a wiring diagram for MY2010 E90 320d?
Thanks

alexwhittemore · 08-23-2013, 01:25 AM

Quote:

Originally Posted by muhanda1

Thanks Alex
Another car reversed on to mine at 2 occasions while mine was parked.
Horn did not work since the engine was not running.
Where could I find a wiring diagram for MY2010 E90 320d?
Thanks

Yeah, for my money I have no idea why they thought it was a good idea running the horns from T15. Even just for simple stuff, like you're picking someone up and need to get their attention in a parking lot. Terrible, terrible oversight.

As far as diagrams, you want WDS: http://www.bmw-planet.com/diagrams/release/en/

beaucz · 09-01-2013, 02:05 PM

Hi guys, I've been learning how to code for a little while now and I've successfully coded Mirrors with fob, Dension Gateway video with ipod, and all my lights (minus headlights) after installing leds but I ran into one problem that I can't seem to find an answer for after few days of searching. I have no errors in dash or nav but for some reason my brake lights still flickers like crazy at start like its still running the light test but only brake light. Any body have any idea Please let me know. would be greatly appreciated.

2007 e92 (2006 production)

coded so for for the brake lights in frm

KALTUEBERWACHUNG_BL_L
nicht_aktiv
KALTUEBERWACHUNG_BL_M_1
nicht_aktiv
KALTUEBERWACHUNG_BL_R
nicht_aktiv
WARMUEBERWACHUNG_BL_L
nicht_aktiv
WARMUEBERWACHUNG_BL_M_1
nicht_aktiv
WARMUEBERWACHUNG_BL_R
nicht_aktiv
CC_MELD_BFD_BL
nicht_aktiv
FEHLERMELDUNG_CC_BFD_L
nicht_aktiv
FEHLERMELDUNG_CC_BFD_R
nicht_aktiv

xelion · 09-02-2013, 05:22 AM

Dump your FSW_PSW.trc file here, we'll see

beats · 09-02-2013, 08:36 PM

hey guys, I have read the first 40 pages, and haven't found the answers yet in this thread, or any other from what I can tell...

So I apologize if this has been asked numerous times before, but I can't find the answer (yet).

Anyway, I have been able to connect with NCSExper, but got an error message of "Following feature is invalid for FA:$6NR", I have found info that leads me to believe my Daten files are outdated.

I have a 2011 M3 Coupe

I have downloaded SP-Daten E89 V48.1 (15.3GB file) and Ediabas 7.2

Will these files work for me? What exactly do I copy from this 15gb Daten file?

Help is greatly appreciated.

Cheers!

08-14-2013, 09:31 PM	#4644
hatton Private First Class 15 Rep 112 Posts Drives: 2008 335i Coupe Join Date: Jul 2013 Location: Zionsville IN/Ames IA iTrader: (0)	Thanks for the previous reply. On another note, just got my cable so I'm ready to begin set up. Have run into some problems with set up though as I am running a 64 bit Windows 8 system. If anyone has had any luck with setting up and successfully coding with Windows 8 please PM me as I don't want to brick my car. I'm following this tutorial specifically.
	Appreciate 0 Quote

08-15-2013, 02:57 AM	#4647
i3illol Rawrrr 19 Rep 122 Posts Drives: a blue car Join Date: Feb 2013 Location: Sydney, Australia iTrader: (0)	Hi guys I'm new here, thanks a lot for the brilliant informations, but I'm wondering where did the coding list go? Tried to open the link on the first page, but it says "Gadgets have been deprecated."?
	Appreciate 0 Quote

08-16-2013, 03:49 PM	#4653
hatton Private First Class 15 Rep 112 Posts Drives: 2008 335i Coupe Join Date: Jul 2013 Location: Zionsville IN/Ames IA iTrader: (0)	When i star expert tool and try to load a profile the only profile provided is Default?
	Appreciate 0 Quote

08-16-2013, 11:59 PM	#4655
hatton Private First Class 15 Rep 112 Posts Drives: 2008 335i Coupe Join Date: Jul 2013 Location: Zionsville IN/Ames IA iTrader: (0)	Hey don't know if anyone found this yet but on thing with the NCS DIY PDF. For me (2008 335i e92), my module was actually "Kombi" instead of "cas" so watch out for that when you're trying to add the digital speedo.
	Appreciate 0 Quote

08-17-2013, 07:04 PM	#4656
rem0 Registered 0 Rep 2 Posts Drives: Bmw e90 320d Join Date: Aug 2013 Location: Norway iTrader: (0)	Latley i've been toying arround with coding, and thanks to this site i have successfully coded mine and my brother's car. However, i've hit a wall now. When im trying to code my car to shortly display the cruise control speed, nothing happens. This is how it goes: - KOMBI module - TEMPOMAT_SETZ_ANZ_DAUER changed from wert_01 to wert_02 Everything goes smooth, but when i use the cruise control nothing happen. Spent several days searching google, found nothing. All help is highly appreciated! The car is an e 320d 2006 mod, just ask if you need any files.
	Appreciate 0 Quote

08-19-2013, 09:03 PM	#4657
u170who Private 5 Rep 62 Posts Drives: e90 330I Join Date: Aug 2012 Location: New York City iTrader: (0)	If I don't have some of the options, can I add them? Also, does anyone know where I can go to learn about reading the bmw mechanical error codes? Thanks in advance, and thanks a lot for this thread, instructions and software.
	Appreciate 0 Quote

08-20-2013, 05:06 PM	#4658
muhanda1 Enlisted Member 3 Rep 49 Posts Drives: 2010 320d E90 MY10 Join Date: Dec 2012 Location: Australia iTrader: (0)	Is it possible to enable the horn at all times? Even when the engine is not running.
	Appreciate 0 Quote

08-23-2013, 12:00 AM	#4660
muhanda1 Enlisted Member 3 Rep 49 Posts Drives: 2010 320d E90 MY10 Join Date: Dec 2012 Location: Australia iTrader: (0)	Thanks Alex Another car reversed on to mine at 2 occasions while mine was parked. Horn did not work since the engine was not running. Where could I find a wiring diagram for MY2010 E90 320d? Thanks
	Appreciate 0 Quote

09-01-2013, 02:05 PM	#4662
beaucz New Member 0 Rep 25 Posts Drives: 2007 335i E92 Join Date: Nov 2012 Location: Los Angeles iTrader: (0)	got a problem with led brake lights Hi guys, I've been learning how to code for a little while now and I've successfully coded Mirrors with fob, Dension Gateway video with ipod, and all my lights (minus headlights) after installing leds but I ran into one problem that I can't seem to find an answer for after few days of searching. I have no errors in dash or nav but for some reason my brake lights still flickers like crazy at start like its still running the light test but only brake light. Any body have any idea Please let me know. would be greatly appreciated. 2007 e92 (2006 production) coded so for for the brake lights in frm KALTUEBERWACHUNG_BL_L nicht_aktiv KALTUEBERWACHUNG_BL_M_1 nicht_aktiv KALTUEBERWACHUNG_BL_R nicht_aktiv WARMUEBERWACHUNG_BL_L nicht_aktiv WARMUEBERWACHUNG_BL_M_1 nicht_aktiv WARMUEBERWACHUNG_BL_R nicht_aktiv CC_MELD_BFD_BL nicht_aktiv FEHLERMELDUNG_CC_BFD_L nicht_aktiv FEHLERMELDUNG_CC_BFD_R nicht_aktiv
	Appreciate 0 Quote

09-02-2013, 05:22 AM	#4663
xelion Banned 4 Rep 81 Posts Drives: 320d Join Date: Aug 2013 Location: WA iTrader: (0)	Dump your FSW_PSW.trc file here, we'll see
	Appreciate 0 Quote

09-02-2013, 08:36 PM	#4664
beats Captain 241 Rep 605 Posts Drives: 2015 911 GTS Join Date: Jun 2013 Location: Toronto iTrader: (0)	hey guys, I have read the first 40 pages, and haven't found the answers yet in this thread, or any other from what I can tell... So I apologize if this has been asked numerous times before, but I can't find the answer (yet). Anyway, I have been able to connect with NCSExper, but got an error message of "Following feature is invalid for FA:$6NR", I have found info that leads me to believe my Daten files are outdated. I have a 2011 M3 Coupe I have downloaded SP-Daten E89 V48.1 (15.3GB file) and Ediabas 7.2 Will these files work for me? What exactly do I copy from this 15gb Daten file? Help is greatly appreciated. Cheers!
	Appreciate 0 Quote