BMW CODING success

xelion · 10-06-2013, 01:45 PM

Hatton, Switch light set to AUTO?

hatton · 10-06-2013, 02:35 PM

Quote:

Originally Posted by xelion

Hatton, Switch light set to AUTO?

My switch is always set to Auto. Doesn't seem to be the problem.

xelion · 10-06-2013, 02:58 PM

Quote:

Originally Posted by hatton

My switch is always set to Auto. Doesn't seem to be the problem.

Do you have iDrive?

If not you should set this up in your dash using BC stalk, there is a option to set welcome lights.

vassil_bk · 10-07-2013, 11:04 AM

Hi all,

Does any one know which are the options that control the angel eyes brightness?

Thank you,
Vassil

jc_bmw · 10-07-2013, 11:28 AM

Quote:

Originally Posted by vassil_bk

Hi all,

Does any one know which are the options that control the angel eyes brightness?

Thank you,
Vassil

PWM_SL_1_FKT_SL_TFL
change the value to wert_09

10-07-2013, 09:42 PM

Hmm...not sure why I'm having such a hard time with this. I can't even get the two black dots to light up yet

Followed the install instructions to a T (using Windows 7 64-bit with an ebay/shipped from USA cable). I also went over this thread countless times and tried a few fixes but still nothing:
http://www.e90post.com/forums/showthread.php?t=480261

No errors appear until I start trying to enter the E90, etc. modules. I'm gonna give the install a go on my old Windows XP laptop and see if I get the same results...

vassil_bk · 10-08-2013, 07:05 AM

Quote:

Originally Posted by jc_bmw

PWM_SL_1_FKT_SL_TFL
change the value to wert_09

Hmm, I don't have this one... I guess I am with FRM2.

I search the whole .TRC file of the FRM module and I guess these are the only options that might be related to my question:
PWM_ANSTEUERUNG_SL_V
PWM_ANSTEUERUNG_SL_V_FL
PWM_ANSTEUERUNG_SL_V_AL
SL_V_PARKL_FKT
SL_V_PO_RL_FKT
SL_VERZOEGERUNG

I am not sure what the vert_0X values mean for each one of these...

xelion · 10-08-2013, 07:52 AM

Quote:

Originally Posted by vassil_bk

Hmm, I don't have this one... I guess I am with FRM2.

I search the whole .TRC file of the FRM module and I guess these are the only options that might be related to my question:
PWM_ANSTEUERUNG_SL_V
PWM_ANSTEUERUNG_SL_V_FL
PWM_ANSTEUERUNG_SL_V_AL
SL_V_PARKL_FKT
SL_V_PO_RL_FKT
SL_VERZOEGERUNG

I am not sure what the vert_0X values mean for each one of these...

You need to use NCSdummy and Nettodat coding.

vassil_bk · 10-08-2013, 09:23 AM

Quote:

Originally Posted by xelion

You need to use NCSdummy and Nettodat coding.

I already used it. Here is what NCS Dummy says about these options:
PWM_ANSTEUERUNG_SL_V - PULSE-WIDTH MODULATION (PWM) CONTROL OF FRONT STANDING LIGHTS
PWM_ANSTEUERUNG_SL_V_FL - PULSE-WIDTH MODULATION (PWM) CONTROL OF FRONT PARKING/POSITION LIGHTS / LOW BEAM ANGEL EYES (DEPENDS ON CHASSIS) WITH HIGH BEAMS ON
PWM_ANSTEUERUNG_SL_V_AL - PULSE-WIDTH MODULATION (PWM) CONTROL OF FRONT PARKING/POSITION LIGHTS / LOW BEAM ANGEL EYES (DEPENDS ON CHASSIS) WITH LOW BEAMS ON
SL_V_PARKL_FKT - OUTPUT FRONT STANDING LIGHTS AS PARKING LIGHTS
SL_V_PO_RL_FKT - OUTPUT FRONT STANDING LIGHTS AS POSITION/TAIL LIGHTS
SL_VERZOEGERUNG

I just don't know to what voltage the wert_0X values correspond. I don't want to burn something while trying things I am not sure of...

AviatorBimmer · 10-11-2013, 02:21 AM

Quick question...

Can NCSExpert be used with the Bavarian Technic Scan Tool cable (Enthusiast Edition)?

MAKKNOWLES330I · 10-12-2013, 05:26 AM

I NEED SOME HELP. I RECENTLY PURCHASED A 2006 BMW 330i WITH 45K MILES. THE VEHICLE IS IN MINT CONDITION. GOT A GREAT DEAL ON IT. I ABSOLUTLY LOVE THIS CAR. I PAYED AND HAD THE CORRECTFILEDOWLOADED ON MY LAPTOP TO CODE THE EXTRA FAETURES AVAILIBLE ON MY CAR. I HAVE WINDOWS 8 ON MY LAPTOP, AND I CANT SEEM TO GET THIS SOFTWARE TO WORK. IM STUCK AT THE POINT WHERE IAM SUPPOSED TO BE ALLOWING THE FIFO PORT TO ACCEPT THE SERIEL NUMBER. THERE IS NO WHERE ON MY COMPUTER WHERE YOU CAN CHANGE THE PORT SETTINGS. IVE BEEN SEARCHIN THESE THREADS, AND GOOGLE FOR DAYS AND CANT FIND ANYTHING. SOMEONE PLEASE HELP. OR BETTER YET IF ANYONE IN IN THE LAS VEGAS AREA AND WANTS TO MAKE SOME $$$ AND CAN COME CODE MY CAR LET ME KNOW.. DESPERATE FOR SOME ASSITANCE

MAKKNOWLES330I · 10-12-2013, 05:40 AM

I Just Paid For All These Coding Files. But I Canr Get It Ti Wirk With Windows 8. Anyone Who Needs All The Files I Can Foward Then To You.

MountainStone · 10-12-2013, 03:55 PM

Quote:

Originally Posted by MAKKNOWLES330I

I NEED SOME HELP. I RECENTLY PURCHASED A 2006 BMW 330i WITH 45K MILES. THE VEHICLE IS IN MINT CONDITION. GOT A GREAT DEAL ON IT. I ABSOLUTLY LOVE THIS CAR. I PAYED AND HAD THE CORRECTFILEDOWLOADED ON MY LAPTOP TO CODE THE EXTRA FAETURES AVAILIBLE ON MY CAR. I HAVE WINDOWS 8 ON MY LAPTOP, AND I CANT SEEM TO GET THIS SOFTWARE TO WORK. IM STUCK AT THE POINT WHERE IAM SUPPOSED TO BE ALLOWING THE FIFO PORT TO ACCEPT THE SERIEL NUMBER. THERE IS NO WHERE ON MY COMPUTER WHERE YOU CAN CHANGE THE PORT SETTINGS. IVE BEEN SEARCHIN THESE THREADS, AND GOOGLE FOR DAYS AND CANT FIND ANYTHING. SOMEONE PLEASE HELP. OR BETTER YET IF ANYONE IN IN THE LAS VEGAS AREA AND WANTS TO MAKE SOME $$$ AND CAN COME CODE MY CAR LET ME KNOW.. DESPERATE FOR SOME ASSITANCE

Check the facebook group 'vegasbimmers.' There's a coder coming into town next week to do a few cars.

PichaDis11 · 10-12-2013, 09:56 PM

Quote:

Originally Posted by FCobra94

Hmm...not sure why I'm having such a hard time with this. I can't even get the two black dots to light up yet

Followed the install instructions to a T (using Windows 7 64-bit with an ebay/shipped from USA cable). I also went over this thread countless times and tried a few fixes but still nothing:
http://www.e90post.com/forums/showthread.php?t=480261

No errors appear until I start trying to enter the E90, etc. modules. I'm gonna give the install a go on my old Windows XP laptop and see if I get the same results...

See the thread titled "Video Coding Setup" Should help you out

PichaDis11 · 10-12-2013, 10:08 PM

Quote:

Originally Posted by MAKKNOWLES330I

I Just Paid For All These Coding Files. But I Canr Get It Ti Wirk With Windows 8. Anyone Who Needs All The Files I Can Foward Then To You.

See the thread titled "Video Guide- BMW Coding Setup" The OP used windows 8 for the tutorial also. Should be spot on for you as well.

vassil_bk · 10-16-2013, 04:24 AM

Currently when I pull the stalk to splash some washer fluid on the windshield the wipers make 5 cleaning cycles. I want to change it to 3 for instance. Is there an option for this or this is hard-coded to 5 and can not be changed?

dlbrooks18 · 10-23-2013, 11:05 PM

What is the code to keep rear parking lights on + taillights when headlights are on? Thanks.

WhiteFury · 10-24-2013, 02:50 AM

If i buy this cable does that mean all i need to do is download the BAV tech tool software to use as a scanner?

xelion · 10-24-2013, 03:49 AM

Quote:

Originally Posted by WhiteFury

If i buy this cable does that mean all i need to do is download the BAV tech tool software to use as a scanner?

Which cable? You can buy K+DCAN and download Standard tools 2.12, then you will have everything you need.

AviatorBimmer · 10-24-2013, 06:26 AM

Quote:

Originally Posted by xelion

Quote:

Originally Posted by WhiteFury

If i buy this cable does that mean all i need to do is download the BAV tech tool software to use as a scanner?

Which cable? You can buy K+DCAN and download Standard tools 2.12, then you will have everything you need.

Does Standard Tools work with the BT Scan cable from Bavarian Tech?

xelion · 10-25-2013, 07:20 AM

Quote:

Originally Posted by AviatorBimmer

Does Standard Tools work with the BT Scan cable from Bavarian Tech?

No, it doesn't I think. Just buy K-dcan from ebay or onestopelectronic and install Standard Tools 2.12.

Najt · 10-26-2013, 02:15 PM

I wanted turn off my tail ligths during auto mode with DRL. I have coded:

VERHALTEN_DRL_TFL
tfl_s
DRL_TFL_MIT_RL_BL
nicht_aktiv
DRL_TFL_MIT_RL_BL_1
nicht_aktiv
DRL_TFL_MIT_RL_BL_2
nicht_aktiv

and I got error in iDrive after start... that rear lights are off...something like that..it was really annoying so i reverted that back.

shall I change it to
VERHALTEN_DRL_TFL
drl_s

??

10-06-2013, 01:45 PM	#4687
xelion Banned 4 Rep 81 Posts Drives: 320d Join Date: Aug 2013 Location: WA iTrader: (0)	Hatton, Switch light set to AUTO?
	Appreciate 0 Quote

10-07-2013, 11:04 AM	#4690
vassil_bk Banned 0 Rep 6 Posts Drives: Man Join Date: Aug 2013 Location: Bulgaria iTrader: (0)	Hi all, Does any one know which are the options that control the angel eyes brightness? Thank you, Vassil
	Appreciate 0 Quote

10-07-2013, 09:42 PM	#4692
FCobra94 Guest 0 Rep n/a Posts Drives:	Hmm...not sure why I'm having such a hard time with this. I can't even get the two black dots to light up yet Followed the install instructions to a T (using Windows 7 64-bit with an ebay/shipped from USA cable). I also went over this thread countless times and tried a few fixes but still nothing: http://www.e90post.com/forums/showthread.php?t=480261 No errors appear until I start trying to enter the E90, etc. modules. I'm gonna give the install a go on my old Windows XP laptop and see if I get the same results...
	Appreciate 0 Quote

10-11-2013, 02:21 AM	#4696
AviatorBimmer Banned 28 Rep 551 Posts Drives: 2007 BMW 335i E92 Join Date: Jan 2013 Location: Virginia iTrader: (4)	Quick question... Can NCSExpert be used with the Bavarian Technic Scan Tool cable (Enthusiast Edition)?
	Appreciate 0 Quote

10-12-2013, 05:26 AM	#4697
MAKKNOWLES330I Registered 0 Rep 3 Posts Drives: 2006 330i N52 A22 E90 Join Date: Oct 2013 Location: LAS VEGAS, NEVADA iTrader: (0)	E90 Diy Coding W/windows 8 I NEED SOME HELP. I RECENTLY PURCHASED A 2006 BMW 330i WITH 45K MILES. THE VEHICLE IS IN MINT CONDITION. GOT A GREAT DEAL ON IT. I ABSOLUTLY LOVE THIS CAR. I PAYED AND HAD THE CORRECTFILEDOWLOADED ON MY LAPTOP TO CODE THE EXTRA FAETURES AVAILIBLE ON MY CAR. I HAVE WINDOWS 8 ON MY LAPTOP, AND I CANT SEEM TO GET THIS SOFTWARE TO WORK. IM STUCK AT THE POINT WHERE IAM SUPPOSED TO BE ALLOWING THE FIFO PORT TO ACCEPT THE SERIEL NUMBER. THERE IS NO WHERE ON MY COMPUTER WHERE YOU CAN CHANGE THE PORT SETTINGS. IVE BEEN SEARCHIN THESE THREADS, AND GOOGLE FOR DAYS AND CANT FIND ANYTHING. SOMEONE PLEASE HELP. OR BETTER YET IF ANYONE IN IN THE LAS VEGAS AREA AND WANTS TO MAKE SOME $$$ AND CAN COME CODE MY CAR LET ME KNOW.. DESPERATE FOR SOME ASSITANCE
	Appreciate 0 Quote

10-12-2013, 05:40 AM	#4698
MAKKNOWLES330I Registered 0 Rep 3 Posts Drives: 2006 330i N52 A22 E90 Join Date: Oct 2013 Location: LAS VEGAS, NEVADA iTrader: (0)	Free Coding Link And Software I Just Paid For All These Coding Files. But I Canr Get It Ti Wirk With Windows 8. Anyone Who Needs All The Files I Can Foward Then To You.
	Appreciate 0 Quote

10-16-2013, 04:24 AM	#4702
vassil_bk Banned 0 Rep 6 Posts Drives: Man Join Date: Aug 2013 Location: Bulgaria iTrader: (0)	Currently when I pull the stalk to splash some washer fluid on the windshield the wipers make 5 cleaning cycles. I want to change it to 3 for instance. Is there an option for this or this is hard-coded to 5 and can not be changed?
	Appreciate 0 Quote

10-23-2013, 11:05 PM	#4703
dlbrooks18 Brigadier General 164 Rep 3,735 Posts Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles iTrader: (2)	What is the code to keep rear parking lights on + taillights when headlights are on? Thanks. __________________ 2008 E90 335
	Appreciate 0 Quote

10-24-2013, 02:50 AM	#4704
WhiteFury Boooost! 71 Rep 793 Posts Drives: 335i Join Date: Sep 2013 Location: NJ iTrader: (0) Garage List 2016 Dodge Charger ... [0.00] 2011 BMW 335i [4.80]	If i buy this cable does that mean all i need to do is download the BAV tech tool software to use as a scanner? __________________ JB4 Stage 2 \| Injen CAI \| BMW PE \| AR Catless DP \| Alpina TCU Flash \| Eibach Pro Kit \| Custom TCKline Koni's \| 19" M359 Wheels \| DWS Tires
	Appreciate 0 Quote

10-26-2013, 02:15 PM	#4708
Najt Second Lieutenant 5 Rep 262 Posts Drives: e92 325D 2008 Join Date: Jan 2010 Location: Europe iTrader: (0)	I wanted turn off my tail ligths during auto mode with DRL. I have coded: VERHALTEN_DRL_TFL tfl_s DRL_TFL_MIT_RL_BL nicht_aktiv DRL_TFL_MIT_RL_BL_1 nicht_aktiv DRL_TFL_MIT_RL_BL_2 nicht_aktiv and I got error in iDrive after start... that rear lights are off...something like that..it was really annoying so i reverted that back. shall I change it to VERHALTEN_DRL_TFL drl_s ??
	Appreciate 0 Quote