BMW CODING success

johnblack33 · 12-22-2013, 07:26 AM

Thanks cryptomit! i'll give it a go

ksspacegray07 · 12-25-2013, 01:52 AM

ok I've been at this post for hours without trying to post for help,

I have a 2011 335is, Running 32 bit Windows XP

I have a K+DCAN INPA Compatible cable (opened it up and it has 8 pins)
I have downloaded all the original links from the OP (running INPA version 5.0.1, EDIABAS 6.4.7, and NCSEXPER 3.1.0)

when i run INPA both circles are black, but when i try to communicate with the airbag i get an error...heard you could still code so i went ahead and followed the diy and got to the vin part and got this error:

VIN is faulty
COAPI-2000: EDIABAS or SGBD error
IFH-0003: DATATRANSMISSION TO INTERFACE DISTRUBED

I changed the latency to 1 and still nothing

someone please help I've been at this for hours

BostonBeemah · 12-27-2013, 11:56 PM

is it just me or does the Neutrino file only show a select few things to code now and only list the commands for an 06??

jc_bmw · 12-27-2013, 11:56 PM

Quote:

Originally Posted by BostonBeemah

is it just me or does the Neutrino file only show a select few things to code now and only list the commands for an 06??

yes it has been like that for a while... not sure if it will get fixed.

BostonBeemah · 12-28-2013, 12:00 AM

Quote:

Originally Posted by jc_bmw

yes it has been like that for a while... not sure if it will get fixed.

damn that sucks.. just wanted to see if i was the only one...

thanks

nate5ks · 12-28-2013, 12:30 PM

Quote:

Originally Posted by ksspacegray07

ok I've been at this post for hours without trying to post for help,

I have a 2011 335is, Running 32 bit Windows XP

I have a K+DCAN INPA Compatible cable (opened it up and it has 8 pins)
I have downloaded all the original links from the OP (running INPA version 5.0.1, EDIABAS 6.4.7, and NCSEXPER 3.1.0)

when i run INPA both circles are black, but when i try to communicate with the airbag i get an error...heard you could still code so i went ahead and followed the diy and got to the vin part and got this error:

VIN is faulty
COAPI-2000: EDIABAS or SGBD error
IFH-0003: DATATRANSMISSION TO INTERFACE DISTRUBED

I changed the latency to 1 and still nothing

someone please help I've been at this for hours

You should be using bmw standard tools 2.12 for this car, the DATEN is probably way out of date.

jc_bmw · 12-28-2013, 12:52 PM

Quote:

Originally Posted by BostonBeemah

damn that sucks.. just wanted to see if i was the only one...

thanks

There is a spreadsheet floating around but not sure if anyone will update Neutrino file or someone can take over the admin of it?

BMPassion · 01-01-2014, 12:18 PM

Quote:

Originally Posted by Rotary Rasp

Oh geez, I just realized that I probably need to set my JB4 to map 0 before I can code....

What's JB4 ?

shawnsheridan · 01-01-2014, 04:48 PM

Quote:

Originally Posted by wafeltom

What's JB4 ?

JB4 = Juice Box 4, which is a Piggyback Tune from BMS :

http://www.burgertuning.com/

BMPassion · 01-02-2014, 05:14 PM

Ok. Thanks.
I'm asking because of error COAPI -2060 have another question. To pic up right coding I set production date #0907 before was #1205.
NCS use JBBF70.prg and i think that is for JBBF2.
In my car is JBBF (1) so should be JBBF87.prg
My headlight washers still don't work.
I'd like to code jbbf using expertmode but getting error COAPI-2060,
COAPI-2062
Is it possible? - ncs use wrong .prg file to coding because of production date ?
Edit.
The answer is Yes.
Got back to previous date and coded to default jbbf.
Headlight washers works now.

veg8 · 01-07-2014, 04:49 PM

Quote:

Originally Posted by jc_bmw

There is a spreadsheet floating around but not sure if anyone will update Neutrino file or someone can take over the admin of it?

Here's the old version, I've uploaded it to google docs.

https://docs.google.com/spreadsheet/...UE&usp=sharing

jc_bmw · 01-07-2014, 09:01 PM

Quote:

Originally Posted by veg8

Here's the old version, I've uploaded it to google docs.

https://docs.google.com/spreadsheet/...UE&usp=sharing

Thanks! But not sure if someone is going to keep maintaining it as we go along?

Chris_Rav · 01-09-2014, 05:30 PM

Can anyone tell me if there is a special cable that I need for my '11 N55 e92 LCI, every cable i see on amazon ebay and even onestop seems to say that it supports up to model year '08.

If anyone has a link for a cable that they know will work (hopefully for a good amount under $100) please send it to me!

xxxjecxxx · 01-09-2014, 09:15 PM

Quote:

Originally Posted by Chris_Rav

Can anyone tell me if there is a special cable that I need for my '11 N55 e92 LCI, every cable i see on amazon ebay and even onestop seems to say that it supports up to model year '08.

If anyone has a link for a cable that they know will work (hopefully for a good amount under $100) please send it to me!

http://www.one-stop-electronics.com/...&product_id=16

spencers · 01-12-2014, 08:21 PM

Woot. Coded the digital speedo and comfort window closing with fob. Also reset adaptations in INPA while I was at it.

If only I had the FRM2 for the welcome lights!

Next up is buying the alarm retrofit. Really wish I could code the clown-nose to blink in the meantime.

Chris_Rav · 01-13-2014, 07:10 PM

Quote:

Originally Posted by xxxjecxxx

http://www.one-stop-electronics.com/...&product_id=16

Was hoping for one under $100 , Not by $1 tho lol

Any other suggestions, I see a ton on amazon but they all have mixed reviews, seems like a hit or miss depending on the car.

alexwhittemore · 01-13-2014, 07:29 PM

Quote:

Originally Posted by Chris_Rav

Was hoping for one under $100 , Not by $1 tho lol

Any other suggestions, I see a ton on amazon but they all have mixed reviews, seems like a hit or miss depending on the car.

It's not a hit or miss depending on the car, it's a hit or miss depending on the cable. I bought one on ebay for $20 and it works perfectly. It's not that your mileage may vary, it's that your mileage will almost certainly vary.

Chris_Rav · 01-13-2014, 09:00 PM

Quote:

Originally Posted by alexwhittemore

It's not a hit or miss depending on the car, it's a hit or miss depending on the cable. I bought one on ebay for $20 and it works perfectly. It's not that your mileage may vary, it's that your mileage will almost certainly vary.

Do you have a link to that cable? Do you think it would work with my car?

Your saying that any cable "Should" work with my car. It's just that most cables that don't work are shit cables?

alexwhittemore · 01-13-2014, 09:24 PM

Quote:

Originally Posted by Chris_Rav

Do you have a link to that cable? Do you think it would work with my car?

Your saying that any cable "Should" work with my car. It's just that most cables that don't work are shit cables?

Sadly I don't (original listing long since ended). The problem is that design consistency from cable to cable is nonexistent. All theoretically work for the purpose stated, but whether their individual design plays nice with INPA and friends (which aren't really quality tested themselves, they aren't meant to be used outside of BMW engineering) is anyone's guess.

Chris_Rav · 01-14-2014, 01:08 PM

Quote:

Originally Posted by alexwhittemore

Sadly I don't (original listing long since ended). The problem is that design consistency from cable to cable is nonexistent. All theoretically work for the purpose stated, but whether their individual design plays nice with INPA and friends (which aren't really quality tested themselves, they aren't meant to be used outside of BMW engineering) is anyone's guess.

Ahh, thank you very much. I guess ill take a shot on an ebay cable and see what happens lol

mr_milo · 01-14-2014, 04:03 PM

Quote:

Originally Posted by Chris_Rav

Ahh, thank you very much. I guess ill take a shot on an ebay cable and see what happens lol

If I can get my second cable back from my brother, I'll have a know working cable for sale. He now has both my cables (since X-Mas) but if/when I can get it back it's going on sale. It's been modified with a jumper for both new & old BMWs and is known to work with a 2000 E46 and a 2011 E93.

Chris_Rav · 01-14-2014, 04:12 PM

Quote:

Originally Posted by mr_milo

If I can get my second cable back from my brother, I'll have a know working cable for sale. He now has both my cables (since X-Mas) but if/when I can get it back it's going on sale. It's been modified with a jumper for both new & old BMWs and is known to work with a 2000 E46 and a 2011 E93.

It would be awesome if you could PM me if you get that back

12-22-2013, 07:26 AM	#4753
johnblack33 Registered 0 Rep 2 Posts Drives: 2006 BMW 335i e90 Join Date: Sep 2013 Location: Melbourne, Australia iTrader: (0)	Thanks cryptomit! i'll give it a go
	Appreciate 0 Quote

12-25-2013, 01:52 AM	#4754
ksspacegray07 Captain 77 Rep 801 Posts Drives: 335is coupe Join Date: Nov 2009 Location: NY iTrader: (3)	ok I've been at this post for hours without trying to post for help, I have a 2011 335is, Running 32 bit Windows XP I have a K+DCAN INPA Compatible cable (opened it up and it has 8 pins) I have downloaded all the original links from the OP (running INPA version 5.0.1, EDIABAS 6.4.7, and NCSEXPER 3.1.0) when i run INPA both circles are black, but when i try to communicate with the airbag i get an error...heard you could still code so i went ahead and followed the diy and got to the vin part and got this error: VIN is faulty COAPI-2000: EDIABAS or SGBD error IFH-0003: DATATRANSMISSION TO INTERFACE DISTRUBED I changed the latency to 1 and still nothing someone please help I've been at this for hours
	Appreciate 0 Quote

12-27-2013, 11:56 PM	#4755
BostonBeemah Lieutenant 75 Rep 524 Posts Drives: AW 135i 6spd Join Date: Sep 2011 Location: Belmont, Ma iTrader: (4)	is it just me or does the Neutrino file only show a select few things to code now and only list the commands for an 06?? __________________ 2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i
	Appreciate 0 Quote

01-02-2014, 05:14 PM	#4762
BMPassion New Member 0 Rep 15 Posts Drives: E90 M47N2, F32 430d Join Date: Apr 2013 Location: Stoke on Trent iTrader: (0)	Ok. Thanks. I'm asking because of error COAPI -2060 have another question. To pic up right coding I set production date #0907 before was #1205. NCS use JBBF70.prg and i think that is for JBBF2. In my car is JBBF (1) so should be JBBF87.prg My headlight washers still don't work. I'd like to code jbbf using expertmode but getting error COAPI-2060, COAPI-2062 Is it possible? - ncs use wrong .prg file to coding because of production date ? Edit. The answer is Yes. Got back to previous date and coded to default jbbf. Headlight washers works now. Last edited by BMPassion; 01-03-2014 at 11:41 AM..
	Appreciate 0 Quote

01-09-2014, 05:30 PM	#4765
Chris_Rav Lieutenant 65 Rep 548 Posts Drives: 2011 e92 LCI 335i xdrive 6MT Join Date: Oct 2013 Location: NJ iTrader: (9)	Can anyone tell me if there is a special cable that I need for my '11 N55 e92 LCI, every cable i see on amazon ebay and even onestop seems to say that it supports up to model year '08. If anyone has a link for a cable that they know will work (hopefully for a good amount under $100) please send it to me!
	Appreciate 0 Quote

01-12-2014, 08:21 PM	#4767
spencers Captain 199 Rep 649 Posts Drives: Sthrizzle Join Date: Oct 2005 Location: A iTrader: (6)	Woot. Coded the digital speedo and comfort window closing with fob. Also reset adaptations in INPA while I was at it. If only I had the FRM2 for the welcome lights! Next up is buying the alarm retrofit. Really wish I could code the clown-nose to blink in the meantime.
	Appreciate 0 Quote