[cryptomit]

Originally Posted by Opo

Just tried this, unfortunately the errors are still present - any other ideas?

Updated file attached...

Try what mrtanz said.

[ramez75]

Originally Posted by cryptomit

Only to NFRM and CAS - these 2 modules store all VOs.
Then recode them to default.

Ramez75 - do you have a profiles for NCSexpert?

Thank you, what do you mean recode them to default?

I installed INPA, EDIABAS, and NCSExpert on my Windows 8 from a friend of mine using the Oracle Virtual Machine.

When I opened NCSExpert there was an EXpermode profile. I never coded before to that extent. I just did simple coding like adding the "V" to the dash board and folding the mirrors using the keyfob simple stuff.

I am trying to find literature on how to code the rear sunblind

Thank you

RB

[cryptomit]

Ok, I can share profiles for you - you should also install native version on your Windows 8.

[ramez75]

Originally Posted by cryptomit

Ok, I can share profiles for you - you should also install native version on your Windows 8.

cryptomit. Thank you

What is native version? Where do I get that from and what does it do.

Also in your previous post what did you mean by "recode them to default"?

[cryptomit]

I meant that you don't need stupid Virtual Machine to make it run on Windows 7/8 32 and 64 bit.

I sent you a Dropbox link.

I also write how to recode module to reset it and bring to default settings. You need to use EXPERTMODUS to do it, the profiles are included there.

[ramez75]

Originally Posted by cryptomit

I meant that you don't need stupid Virtual Machine to make it run on Windows 7/8 32 and 64 bit.

I sent you a Dropbox link.

I also write how to recode module to reset it and bring to default settings. You need to use EXPERTMODUS to do it, the profiles are included there.

When I reset and bring to default setting will I lose all my coding. Like folding mirror, Opening windows, sunroof using FOB key, "V" in the dash board, etc

Thanks

Ramez

[dbworld4k]

Okay so I pulled up the FSW_PSW.TRC from my KOMBI and BC_DIGITAL_V is not there. Do I simply add it to the bottom along with ACTIV and then save it as a MAN file (does it need to be saved as both TRC and MAN?) and then upload it to the car?

edit: Nevermind... SUCCESS!

[cryptomit]

Originally Posted by ramez75

When I reset and bring to default setting will I lose all my coding. Like folding mirror, Opening windows, sunroof using FOB key, "V" in the dash board, etc

Thanks

Ramez

You will loose folding mirrors only.

[Longun]

Originally Posted by Javy

It actually is possible.

If you have an automatic, the Alpina B3 flash will enable this feature.

I've been looking into this. I can't seem to find anyone who's done it to a 330d. Most seem to be later cars with 335i or 335d.

Are you aware of any early E90's with this done?

[JOHNNY-5]

for those who bought from one stop electronics, how long before you got your cable? I didn't notice when I ordered that it was coming from Hong Kong.

[Carnzen]

is there a condensed version of this thread somewhere, with the current software/cable links? I really don't want to have to sift through 100+ pages.

Buying an E90 this month, and want to be able to have some fun with the coding.

[adeljobran718]

How long do you guys think it will take a first timer to do?

[nn612]

I have just ordered a cable where can i download the software the links on the first post on dead!?

[polaris_tr]

Hello;

I have 2006 E90 320i.My friend has same and his car has automatic door lock.When the car is moveing the doors is locking automatically.So may I active this function.If I can may somebody tell me how can I do this.

Thanks for your help...

[cryptomit]

Originally Posted by polaris_tr

Hello;

I have 2006 E90 320i.My friend has same and his car has automatic door lock.When the car is moveing the doors is locking automatically.So may I active this function.If I can may somebody tell me how can I do this.

Thanks for your help...

Sure you can, if you don't have iDrive then you should search for it in your dash using BC stalk. There are few options and one of them is lock after moving off.

[polaris_tr]

Originally Posted by cryptomit

Sure you can, if you don't have iDrive then you should search for it in your dash using BC stalk. There are few options and one of them is lock after moving off.

I checked but there isn't any option from bc stalk menu.I think that this function not active.I find this code other topic :
--------------------------------------------------------------------
They are all in CAS.
VERRIEGELN_XKM/H_SENDER_1
VERRIEGELN_XKM/H_SENDER_2
VERRIEGELN_XKM/H_SENDER_3
VERRIEGELN_XKM/H_SENDER_4

Change all options to activ

The second option determins the speed that the doors auto lock
The option name is:
VERRIEGELUNGSSCHWELLE

options are from wert_01 to wert_06
I used wert_03 which locks at around 10km/h

[mizta insane]

someone mind sharing with me the program file and PDF, the links are head thanks.

[EliseRR]

can someone please let me know where I can download NCS Expert?

[titangodgamer12]

excuse me, but where can i download the files? The links are broken!

[ashmostro]

Just tried running the INPAload airbag test, and after I clicked on airbag, I got this message:



Both Battery and Ignition are lit, per the NCS DIY instructions...

[polaris_tr]

Hello;

My car is 2006 E90.All inpa cable is od 3/2007 for E90.I cant find for 2006.So whic cable I have to use for my car?Anybody can help me please...

Thanks...

[dbworld4k]

I setup my software to work with E89 files for my E92.

What's the procedure for being able to read/code other chassis too (ie. E39/E46/E60)? Do I just copy the IPO files from the downloaded SPDaten folder into \NCSExper\SGDAT\E39 + Daten files into \NCSEXPER\DATEN\E39 + PRG files into \EDIABAS\Ecu\E39 or is there something more to this?