Supercharger stuff (MILVs+AA+BPC)

Noir · 08-24-2018, 09:07 AM

Quote:

Originally Posted by Biginboca

Seattlesquash make sure you delete that mesh grill piece that gave Noir all those issues.

I would love for one of you SC guys to post some 0-80 videos, or a time slip. Really would like to know how it puts the power down!

I think a 3.73 final drive swap would complement the SC nicely. Are you guys tired of hearing me champion the diff swap yet? Lol

Believe me boss man, I NEED a fancy diff in my life. Saving pennies again for one from diffsonline

YES Seattlesquash
PLEASE PLEASE PLEASE take out that mesh.
Now, I was told it was meant for MAF sensors (I have an IAT from a euro airbox, so I didnt need to cut anything.) but I dont know if you're supposes to cut into the wires to essentialy, for lack of a better explanation, make a "IAT" sensor. I would confirm this for sure!

Seattlesquash · 08-24-2018, 10:23 AM

Quote:

Originally Posted by Biginboca

Seattlesquash make sure you delete that mesh grill piece that gave Noir all those issues.

I would love for one of you SC guys to post some 0-80 videos, or a time slip. Really would like to know how it puts the power down!

I think a 3.73 final drive swap would complement the SC nicely. Are you guys tired of hearing me champion the diff swap yet? Lol

From everything I've seen so far I believe full n/a mods + 3.73 diff swap > supercharger (at its current level of development).

But a 3.73 diff swap with SC would be the cats meow I think! That should be a low 13's quarter mile set up and make a sweet/reliable daily

Did you pull a supertrooper "meow" in there

I will post up some info, and perhaps a dyno, and don't you worry contacted ESS about that part a while back and I have both options sent so I can run MAF and Alfa, but only MAF for a day a year so not worrying about turbulent air flow!

Boom!

hassmaschine · 08-24-2018, 10:32 AM

you shouldn't need to cut any wires for the MAF-delete, even if you don't have a euro IAT. the tune just ignores the MAF signal.

Noir · 08-24-2018, 10:46 AM

Quote:

Originally Posted by hassmaschine

you shouldn't need to cut any wires for the MAF-delete, even if you don't have a euro IAT. the tune just ignores the MAF signal.

thanks for clarifying!
I definitely forgot

Seattlesquash · 08-24-2018, 01:50 PM

Another picture of all parts included! Very well packaged and parts look very high quality!

CobraMarty · 08-24-2018, 04:17 PM

Is there a close up and part number on the injectors?

Seattlesquash · 08-24-2018, 07:21 PM

Quote:

Originally Posted by CobraMarty

Is there a close up and part number on the injectors?

Here, works?

CobraMarty · 08-24-2018, 07:58 PM

Perfect, thanks.

M3 injectors, about $25 each.

Echoninety · 08-24-2018, 08:36 PM

I want to do this but money doesn't grow on trees and my kids do keep growing. I need a new job to try this kit out.

Noir · 08-24-2018, 11:14 PM

Quote:

Originally Posted by CobraMarty

Perfect, thanks.

M3 injectors, about $25 each.

When are you going to get around to yours?

Seattlesquash · 08-25-2018, 02:48 AM

Quote:

Originally Posted by Noir

Quote:

Originally Posted by CobraMarty

Perfect, thanks.

M3 injectors, about $25 each.

When are you going to get around to yours?

Probably in a week or so, had back surgery about a 2 weeks ago and need another week. Trust me, otherwise I be all over it! How do you like your setup now once you had it for a while?

Kubricks · 08-25-2018, 03:55 AM

Quote:

Originally Posted by Noir

Thanks man!!

Here we go.
The car runs fine, noise level similar to other videos of Vortech.
You can't hear it in the cabin anyway.

Noir · 08-25-2018, 10:11 AM

Quote:

Originally Posted by Kubricks

Here we go.
The car runs fine, noise level similar to other videos of Vortech.
You can't hear it in the cabin anyway.

DUDE

I am so relieved!
Thank you tenfold!
*wipes the sweat from the brow*

I know youre a 1er, but whatsup with that bonnet?!

Noir · 08-25-2018, 10:22 AM

Quote:

Originally Posted by Seattlesquash

Probably in a week or so, had back surgery about a 2 weeks ago and need another week. Trust me, otherwise I be all over it! How do you like your setup now once you had it for a while?

Damn, dude! Hope all is well.
Well, take it easy! It is FUN! I can pass the weenies out here who don't want to let me get over.

i.e. this well endowed man in a chevy/gmc pickup with ease after he wanted to speed match me... Flipped the hazards on so he knows who daddy is.

I'm sure the rest of the guys w/ 6M/T have noticed (at least it is this way in my experience...) The climb from like 45 and up is butter, even more apparent now! I have to be uber careful about whose around me hahaha. No b.s. Im up to 55 in 2nd gear in a damn good time! (Sorry Biginboca, I am trying to find an area to be ballsy in. 80 and up is reckless driving here in VA, already got the wrist slapped once! D: I will see about getting to a strip to see what I can do, although it'll be challenging for me to represent an accurate time, as I have been nothing but a spectator when I go to the strip...)

And you, CobraMarty, when are you gettin' it done? What else do you need?

Edit:
Torgus as soon as someone buys my complete NA intake setup, I'll have enuff play moniez to look into some meth. I guess no one wants a nice setup for the low..

Kubricks · 08-25-2018, 10:26 AM

Quote:

Originally Posted by Noir

DUDE

I am so relieved!
Thank you tenfold!
*wipes the sweat from the brow*

I know youre a 1er, but whatsup with that bonnet?!

No problem!

It's a revozport carbon bonnet.

Noir · 08-25-2018, 10:48 AM

Duuuuuude that is SO CLEAN O_O"""

Torgus · 08-25-2018, 01:17 PM

That is a cool looking hood! How is the fitment?

Kubricks · 08-26-2018, 01:54 AM

Quote:

Originally Posted by Noir

Duuuuuude that is SO CLEAN O_O"""

Thank man.

Not as clean now due to unmatching F/R wheels. Need something wider at the rear after supercharged so I just got a pair of ZE30 that's available which can fit 255s. They are super light.

Quote:

Originally Posted by Torgus

That is a cool looking hood! How is the fitment?

I'd say 8/10 as is now. The side fits perfectly but the front have some leveling issue, not very serious but still.
With aerocatch installed I guess 9.5/10.

Noir · 08-26-2018, 07:00 AM

AND ITS A HATCH?!?
Damn, son!

BTW check out my range!
I'm sure it'll be a little less w/ all the stop n go traffic... This is after a 7 mile trip home from nearest e85 pump and a 14 mile trip to work (why am I here today?

)

Noir · 08-26-2018, 11:23 AM

Kubricks

Am I too paranoid, my guy?

Cdutch513 · 08-26-2018, 06:52 PM

Quote:

Originally Posted by Noir

Kubricks

Am I too paranoid, my guy?

Yes haha. I just let mine sit for 10 minutes while I clean my wheels and it's good

Kubricks · 08-26-2018, 07:36 PM

Quote:

Originally Posted by Noir

Kubricks

Am I too paranoid, my guy?

I'd do exactly the same lol.

08-24-2018, 10:32 AM	#487
hassmaschine Major General 3990 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	you shouldn't need to cut any wires for the MAF-delete, even if you don't have a euro IAT. the tune just ignores the MAF signal.
	Appreciate 0 Quote

08-24-2018, 01:50 PM	#489
Seattlesquash Car Enthusiast 1021 Rep 1,352 Posts Drives: E92 328i 2007 SC Join Date: Nov 2011 Location: WA iTrader: (0) Garage List 2007 E92 328i ESS V ... [10.00] 2007 B7 RS4 AMD SC ... [10.00]	Another picture of all parts included! Very well packaged and parts look very high quality! Attached Images __________________ E92 328i\|6MT\|ESS SC VT-1 (G.2)\|3 stage\|22 RPD SC/Meth tune\|AA Headers\|Snow Performance Meth Injection\|Rotiform KPS\|R139\|PS4S 275.245.19\|M3 front\|M3 side skirts\|MTEC rear\|Akrapovic C tips\|Koni Sport (Yellow)\|Eibach PS\|Hotchkis SB\|C high-kick spoiler\|C mirror Covers\|C trim\|LCI tails\|M3 Control arms\|M3 MS\|Black E trim\|Black kidney's\|Full LED Conv\|BMW F30 370/345 BBK\|ECS SS\|ECS Strut Tower Brace\|034 Engine-Trans-Rear Mounts
	Appreciate 0 Quote

08-24-2018, 04:17 PM	#490
CobraMarty Major 633 Rep 1,402 Posts Drives: 2007 328xi e90 + e92 Join Date: Sep 2010 Location: BimmerMILVs.com iTrader: (7)	Is there a close up and part number on the injectors?
	Appreciate 0 Quote

08-24-2018, 07:58 PM	#492
CobraMarty Major 633 Rep 1,402 Posts Drives: 2007 328xi e90 + e92 Join Date: Sep 2010 Location: BimmerMILVs.com iTrader: (7)	Perfect, thanks. M3 injectors, about $25 each.
	Appreciate 3 Phyrexia510.50 Seattlesquash1021.00 Noir893.00 Quote

08-24-2018, 08:36 PM	#493
Echoninety First Lieutenant 87 Rep 327 Posts Drives: 2006 330i e90 Sport 6mt Join Date: Jul 2016 Location: DMV iTrader: (0)	I want to do this but money doesn't grow on trees and my kids do keep growing. I need a new job to try this kit out. __________________ 2020 M340i Dravit Grey RWD \| 2006 330i Sparkling Graphite Metallic
	Appreciate 0 Quote

08-25-2018, 10:48 AM	#500
Noir Major 893 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	Duuuuuude that is SO CLEAN O_O""" __________________ See you, space cowboy. *Supercharged*
	Appreciate 1 Echoninety87.00 Quote

08-25-2018, 01:17 PM	#501
Torgus Slow. 3812 Rep 7,162 Posts Drives: N54 6466 100% E85 + Meth Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	That is a cool looking hood! How is the fitment?
	Appreciate 0 Quote

08-26-2018, 07:00 AM	#503
Noir Major 893 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	AND ITS A HATCH?!? Damn, son! BTW check out my range! I'm sure it'll be a little less w/ all the stop n go traffic... This is after a 7 mile trip home from nearest e85 pump and a 14 mile trip to work (why am I here today? ) Attached Images __________________ See you, space cowboy. *Supercharged*
	Appreciate 1 Seattlesquash1021.00 Quote

08-26-2018, 11:23 AM	#504
Noir Major 893 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	Kubricks Am I too paranoid, my guy? Attached Images __________________ See you, space cowboy. *Supercharged*
	Appreciate 0 Quote