[lordbmw]

I installed a BMS/CPE charge pipe since my stock one committed suicide.

Also changed spark plugs while I was at it.

Here are pics of the deceased, RIP:

[SHEEDI]

Did, 2 step paint correction and applied Gtechniq CSL and Exo v3, I still have to apply 2nd coat of Exo v3, stay tuned

[Dan Bilzerian]

Originally Posted by GottWhat

Placed a deposit on the replacement...

Those seats look like they have no lateral support...

[GottWhat]

Originally Posted by Dan Bilzerian

Those seats look like they have no lateral support...

They do

[tcphoto]

Washed it and ordered a brake fluid flush kit.

[GoRomeo]

Replaced my starter. It lasted 12 yrs not too shabby... DYI'd

[Kismail1]

Not Today but over two weekends.

Slight paint correction
Washed
Clayed
compound Meguiars M105
Polish Meguars M205
Mothers synthetic wax
all done with Griots buffer and country lake pads

took 10 hours , wasnt even perfect " black paint"

Installed PE SOUNDS MEEEANN!! love the burble that comes when you let off the Gas

Oil Change
Mann Filter
Castol 5w-40

[Alxdim]

Nothing much. Just tinted my windows and put on new wheels that I bought

[NiNeTyOne]

Originally Posted by SHEEDI

Did, 2 step paint correction and applied Gtechniq CSL and Exo v3, I still have to apply 2nd coat of Exo v3, stay tuned

Serum light is incredible. Not for the beginner, but it does an amazing job. Car looks awesome!

[NiNeTyOne]

Put in a new 3 stage IM with Dan Bilzerian's much appreciated help. Always makes the job go quick with an extra pair of hands around.

Going to see Haas tomorrow to get the 330 tune flashed. Good times.

[Si335d]

I changed out my air filter and checked power steering fluid level. I've ordered some pentison chf 11s for the car, as it has active steering the reservoir was low, I think it will use ever so slightly more than average.

[tlow98]

Originally Posted by NiNeTyOne

Put in a new 3 stage IM with Dan Bilzerian's much appreciated help. Always makes the job go quick with an extra pair of hands around.

Going to see Haas tomorrow to get the 330 tune flashed. Good times.

You're living my e91 wet dream. Enjoy!

[NiNeTyOne]

Put the 330 map on the e91, some good improvement there. Looking forward to some more tweaks to this tune in the near future. Thanks Haas!

[Welcome to NBA Jam]

Did some parts warranty stuff. The mechanic liked my car apparently

[F22_Raptor]

Did some touch up paint for a dent. I used rusto Titanium Silver, looks better I suppose.

[SHEEDI]

finally finished 2 step correction, applied Gtechniq CSL and Exo v3 2 coats each

[spencers]

Leatherique treatment on the seats. Refinished headlamps and sealed with "Wipe New"

[Welcome to NBA Jam]

I seriously need to do leatherique this summer.

[Si335d]

Siphoned my old power steering fluid and refilled using pentison chf 11s. The steering does feel slightly lighter and smoother although I haven't driven it for very long.

[Si335d]

Originally Posted by spencers

Leatherique treatment on the seats. Refinished headlamps and sealed with "Wipe New"

What's your opinion on leatherique and would you recommend it? I currently use Autoglym leather cleaner and Autoglym leather conditioner. I'm looking for a slightly stronger cleaning product for my leather seats.

[N52UNED]

3-Stage Intake Manifold install. BPC tune in a few days.

[spencers]

Originally Posted by Si335d

What's your opinion on leatherique and would you recommend it? I currently use Autoglym leather cleaner and Autoglym leather conditioner. I'm looking for a slightly stronger cleaning product for my leather seats.

It's been years since I used Leatherique on one of my previous BMWs (which actually had vinyl seats). So my only real impression is on the E90. The seats went from shiny to matte. But don't expect the product to cover up scratches or creases in the leather. It also won't makes leather bumpy again if it's all flattened out. It simply feels a little more supple and looks matte again. Hope it stays that way for some time because I broke quite a sweat!

Having the oil conditioner step first allows it to get into the leather and work the contaminants out. Just add heat!