All COBB Tuning AccessPORT Flash for N54 335i Discussion Here

benzy89 · 07-20-2012, 02:29 PM

6MTE92 · 07-20-2012, 02:32 PM

Quote:

Originally Posted by rader1

What he's referring to is the amount of e85 required for the car to run the aggressive map to it's potential. He's correct there. If we were talking ATR and an e85 map then you would be correct.

Actually hes wrong, some of us are running 50:50 E85 using ATR as well

rader1 · 07-20-2012, 02:55 PM

Quote:

Originally Posted by 6MTE92

Actually hes wrong, some of us are running 50:50 E85 using ATR as well

WHAT!? Do tell!!! How are your STFTs? The most I've seen is just north of about a 30% mix before the trims Max out

jetbill · 07-20-2012, 03:52 PM

Quote:

Originally Posted by ErvGotti

Are you going WOT? Also you need to add timing to your logs nothing is showing up on your attachment.

TPS is at 80, so i yes.
Timing shows 1,2,3,4,5,6 corrections col and cyl 1 actual.

Jeef · 07-20-2012, 04:32 PM

Cars been throwing codes P2AA2 P3100 P2A9F. Need some help thanks.

dfv2 · 07-20-2012, 05:19 PM

Quote:

Originally Posted by Jeef

Cars been throwing codes P2AA2 P3100 P2A9F. Need some help thanks.

I searched and found some probable solutions, paypal me $5 and I'll tell you

vanos..?

sparkyblue · 07-20-2012, 05:39 PM

Quote:

Originally Posted by rader1

Log it!

Quote:

Originally Posted by 6MTE92

You need to log LTFT's and STFT's to make sure you aren't maxing them at (34%).

I've never used the data log feature in the Cobb AP before, what are the variables that I should log?

I never bothered with data logging because my car has been running smoothly for the past year on the OTS Sport Stage 1 maps.

But now, all the buzz about the amazing properties of mixing E85 got me to want to give Aggressive a shot (as I do not have access to 93 here in Cali).

rader1 · 07-20-2012, 05:57 PM

Quote:

Originally Posted by sparkyblue

I've never used the data log feature in the Cobb AP before, what are the variables that I should log?

I never bothered with data logging because my car has been running smoothly for the past year on the OTS Sport Stage 1 maps.

But now, all the buzz about the amazing properties of mixing E85 got me to want to give Aggressive a shot (as I do not have access to 93 here in Cali).

http://www.e90post.com/forums/showthread.php?t=696472

Use the default logging channels and be sure to have STFT and LTFT marked as logging channels.

ErvGotti · 07-20-2012, 06:31 PM

Quote:

Originally Posted by jetbill

TPS is at 80, so i yes.
Timing shows 1,2,3,4,5,6 corrections col and cyl 1 actual.

Sorry I wasn't used to the format you have it in. The car seems to be running fine to me. It's definitley hot where your at and I believe thats why your only seeing 2 max degrees of timing where I'm sure agressive should be around 4, but no timing drops which is good.

Deemo · 07-20-2012, 08:02 PM

So pretty much if I want any real gains with e85 I need to stick with procede or jb4, until Cobb comes out with dedicated e85 maps?

Carl Morris · 07-20-2012, 08:16 PM

Quote:

Originally Posted by Deemo

So pretty much if I want any real gains with e85 I need to stick with procede or jb4, until Cobb comes out with dedicated e85 maps?

ATR

6MTE92 · 07-20-2012, 08:48 PM

Quote:

Originally Posted by Deemo

So pretty much if I want any real gains with e85 I need to stick with procede or jb4, until Cobb comes out with dedicated e85 maps?

You can run E85 & 91 or 93 octane blends just like PROcede and JB4, you just have to get tuned for it by paying for a protune, an etune or by making your own map using ATR.

6MTE92 · 07-20-2012, 09:09 PM

Quote:

Originally Posted by rader1

Quote:

Originally Posted by 6MTE92

Actually hes wrong, some of us are running 50:50 E85 using ATR as well

WHAT!? Do tell!!! How are your STFTs? The most I've seen is just north of about a 30% mix before the trims Max out

I'm waiting to empty this tank and I'll get some logs of 50:50. Meth helps to reduce fuel trims 👏

Jeef · 07-20-2012, 09:39 PM

Quote:

Originally Posted by dfv2

I searched and found some probable solutions, paypal me $5 and I'll tell you

vanos..?

no thanks anyone else?

rader1 · 07-20-2012, 10:34 PM

Quote:

Originally Posted by 6MTE92

I'm waiting to empty this tank and I'll get some logs of 50:50. Meth helps to reduce fuel trims 👏

Ahh, I completely over looked the HFS-4 in your sig. Meth just may have to be our saving grace until Cobb releases those fuel scaler tables. I'm contemplating a 50/50 93-e85 dyno tune....

sparkyblue · 07-20-2012, 10:46 PM

Quote:

Originally Posted by rader1

http://www.e90post.com/forums/showthread.php?t=696472

Use the default logging channels and be sure to have STFT and LTFT marked as logging channels.

I have logged a few 2nd and 3rd gear pulls. What do I look for in terms of numbers?

rader1 · 07-20-2012, 10:55 PM

You want the fuel trims to be well below 34%(Max fueling.) Most people(including me) want to see low 20s.

Save a copy of the csv as a txt and then post it up as an attachment and I'll go through the log with you.

6MTE92 · 07-20-2012, 11:16 PM

Quote:

Originally Posted by rader1

Quote:

Originally Posted by 6MTE92

I'm waiting to empty this tank and I'll get some logs of 50:50. Meth helps to reduce fuel trims ð

Ahh, I completely over looked the HFS-4 in your sig. Meth just may have to be our saving grace until Cobb releases those fuel scaler tables. I'm contemplating a 50/50 93-e85 dyno tune....

You should be fine but expect run a fairly high concentration of meth - like 80/20.

Danny_K · 07-21-2012, 09:56 PM

Would love anyones thoughts on this log. Timing is being pulled on one cylinder. Ill check the basics, new plug and swap the coil.

I will relog to verify the one cylinder is the culpret.

Anyone see anything else odd?

...and i will turn on the fuel trims for next log. Anything else i should do?

sparkyblue · 07-22-2012, 12:56 AM

Quote:

Originally Posted by rader1

You want the fuel trims to be well below 34%(Max fueling.) Most people(including me) want to see low 20s.

Save a copy of the csv as a txt and then post it up as an attachment and I'll go through the log with you.

Sweet! This is a a pull done in about 60 Degree temps, traction control completely disabled, 75% CALI 91 OCT Shell & 25% E85 Chevron.

Map has been installed for a day, with a handful (5-10) WOT pulls done, so adaptations should be set.

I started logging at a stop light, and did a 2nd & 3rd gear pull.

Would you please check if I'm running safely with this map & mixture.

rader1 · 07-22-2012, 08:50 AM

Quote:

Originally Posted by Danny_K

Would love anyones thoughts on this log. Timing is being pulled on one cylinder. Ill check the basics, new plug and swap the coil.

I will relog to verify the one cylinder is the culpret.

Anyone see anything else odd?

...and i will turn on the fuel trims for next log. Anything else i should do?

Sounds like you know what's going on

Aside from the timing corrections in no.4 everything else looks good.

Jake@MOTIV · 07-22-2012, 08:52 AM

Timing corrections don't necessarily mean you have too aggressive of a map. If you are seeing multiple cylinders getting corrections together then its what we look for but little random corrections are typically just noise. The sensors here are too sensitive and you should learn to weed through the "noise" and find the actual events.

07-20-2012, 02:29 PM	#5809
benzy89 Banned 83 Rep 2,396 Posts Drives: '08 E90 335i Join Date: Jan 2012 Location: Northern NJ iTrader: (3) Garage List 2008 BMW 335i [7.50]
	Appreciate 0 Quote

07-20-2012, 04:32 PM	#5813
Jeef Lieutenant Colonel 396 Rep 1,943 Posts Drives: AW E92 335i Join Date: Nov 2008 Location: San Diego, CA iTrader: (6)	Cars been throwing codes P2AA2 P3100 P2A9F. Need some help thanks.
	Appreciate 0 Quote

07-20-2012, 08:02 PM	#5818
Deemo Second Lieutenant 7 Rep 297 Posts Drives: 07 E90 335i Join Date: May 2012 Location: Plano, Texas iTrader: (1)	So pretty much if I want any real gains with e85 I need to stick with procede or jb4, until Cobb comes out with dedicated e85 maps? __________________ 07 E90 335i 6AT
	Appreciate 0 Quote

07-20-2012, 10:55 PM	#5825
rader1 Banned 71 Rep 2,197 Posts Drives: Cobb Stage 2+ 135i Join Date: Apr 2011 Location: Roanoke, VA iTrader: (0)	You want the fuel trims to be well below 34%(Max fueling.) Most people(including me) want to see low 20s. Save a copy of the csv as a txt and then post it up as an attachment and I'll go through the log with you.
	Appreciate 0 Quote

07-22-2012, 08:52 AM	#5830
Jake@MOTIV Captain 87 Rep 949 Posts Drives: 135i, 335i Join Date: Dec 2009 Location: MD & NC iTrader: (7)	Timing corrections don't necessarily mean you have too aggressive of a map. If you are seeing multiple cylinders getting corrections together then its what we look for but little random corrections are typically just noise. The sensors here are too sensitive and you should learn to weed through the "noise" and find the actual events.
	Appreciate 0 Quote