|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
MHD "take a look at my log" thread
|
|
04-14-2024, 07:34 AM | #5941 | |
New Member
0
Rep 19
Posts |
Quote:
Question: should i change it to 91oct stage 2 for now? |
|
Appreciate
0
|
04-14-2024, 10:45 AM | #5942 |
Private First Class
48
Rep 113
Posts |
to be nonest i don' think octane is the problem, it's fuel supply related,problem should be here even with stock tune.
Try 91 if you want but personnaly i will not run my motor with such fuel problem especially @high load. Find the problem first then enjoy mhd tune. |
Appreciate
0
|
04-16-2024, 12:42 PM | #5943 |
New Member
0
Rep 19
Posts |
Please help me guys im at a lost
So i listened to you guys and tried V10 Stage 2 93 OCT, and things got worse, i even got a superknock DME code on cylinder 2, guys could someone take a look at this log and let me know where I have went wrong, it was a gear 4 pull to 6.4k rpm then I upshifted to 5th and continue for 2 seconds.
current mods: decatted stock downpipes, mperf exhaust non decatted, evolution race CP, forge FMIC, BMS DCI. Additionally: Yes i do know LPFP is gonna go out soon i have a shadow code for it question i have is could this possibly be the cause of such bad logs? Or is the fuel octane that I use just not up to par? or could it be a coil pack issue? this super knock code really scared the shyt out of me and i went to stage 1+ after seeing this can anyone please advise? ps. Car has not had a decarbon yet (will go in for it soon) , spark plugs have just been changed one step colder. https://datazap.me/u/iaynewong123/ge...3-94-98-100-84 Last edited by E92335ISG; 04-16-2024 at 12:48 PM.. |
Appreciate
0
|
04-16-2024, 12:47 PM | #5944 | |
New Member
0
Rep 19
Posts |
Quote:
|
|
Appreciate
0
|
04-17-2024, 12:32 PM | #5946 | |
Private First Class
48
Rep 113
Posts |
Quote:
thats's strange, your log looks pretty good exept timing correction.... Boost,HPFP, STFT,LTFT,WGDC,MAF are good on this log. LPFP a bit too low @high rpm but ok @ low rpm and you have timing correction@low rpm too.... your car is a DCT car right? Ask just in case you made a bad gearbox choice in MHD app... |
|
Appreciate
0
|
04-17-2024, 12:35 PM | #5947 | |
New Member
0
Rep 19
Posts |
Quote:
And yes its dct chosen in mhd , log below! Please advice! 91oct gear 4 stage 1+ |
|
Appreciate
0
|
04-17-2024, 12:38 PM | #5948 |
New Member
0
Rep 19
Posts |
Hey man , i just needed to find a tune that the car is able to handle for now , as the previous owner cloned the ecu i essantially cant go back to stock , and my workshop is very busy this week earliest appointment they can give me is next week so i had to do this
|
Appreciate
0
|
04-17-2024, 12:43 PM | #5949 |
Private First Class
48
Rep 113
Posts |
yes I saw it and it is a good log.
One thing stay in my mind is your first third log in 3th gear wher HPHP pressure fall to 700psi @High rpm, that was strange but no problem on your last logs. |
Appreciate
0
|
04-17-2024, 12:49 PM | #5950 | |
New Member
0
Rep 19
Posts |
Quote:
Could also be the fact that i have burbles enabled , walnut blast hasnt been done and in my country its really hot and humid 24/7 so iat may not be ideal compared go you guys countries , which all stacked against me when i ran a more aggresive tune But once again just wanna thank you so much for advising me on the logs , really gave me a better idea as to what i should try to get the car to not be at danger levels before i can get the stuff changed next week |
|
Appreciate
0
|
04-17-2024, 04:32 PM | #5952 |
New Member
5
Rep 6
Posts |
New n54 owner in need of some help.
I recently bought a manual e92 335i (n54) which has catless DP's and a stage 2 map (custom map). The car smokes when coming to a stop so thought I would try and run some logs to see how the turbos are performing. I flashed MHD and put on the stage 0 map with a few options (burble, launch control etc). I've logged a 3rd gear wot pull from 2k rpm: https://datazap.me/u/ashaw87/log-171...og=0&data=3-20 Shortly after I got an eml on the dash and reduced power, so I did a short pull: https://datazap.me/u/ashaw87/log-171...og=0&data=3-20 and read the codes (attached). From what I can see the boost is exceeding the target, is that whatbis throwing the codes? If I turn the car off and on again it runs as normal. Prior to flashing MHD the car would often be down on power after a hard pull but never gave an eml on the dash. Thoughts? |
Appreciate
0
|
04-18-2024, 05:34 AM | #5953 |
Captain
354
Rep 609
Posts |
^check/replace your boost solenoids
once you see low fuel pressure, STOP driving and fix asap but not my car and my ring lands Last edited by 335i54n; 04-18-2024 at 05:41 AM.. |
Appreciate
0
|
04-18-2024, 06:47 AM | #5954 |
Private
5
Rep 72
Posts
Drives: 335i n54
Join Date: Jan 2023
Location: Germany Hamburg
|
What u guys think is the log ok? i think my bank 1 injectors are gone, they need to long to reach 234..
https://datazap.me/u/lucan54/new-spa...og=0&data=3-21 |
Appreciate
0
|
04-18-2024, 08:23 AM | #5956 |
Private
5
Rep 72
Posts
Drives: 335i n54
Join Date: Jan 2023
Location: Germany Hamburg
|
ok ty, but when my car warm is and i start it up again it feels like small misfires for the first 10-15sec.. i think leaky injectors
|
Appreciate
0
|
04-18-2024, 03:39 PM | #5958 |
Private
5
Rep 72
Posts
Drives: 335i n54
Join Date: Jan 2023
Location: Germany Hamburg
|
|
Appreciate
0
|
04-18-2024, 04:31 PM | #5959 |
New Member
5
Rep 6
Posts |
|
Appreciate
0
|
04-18-2024, 04:37 PM | #5960 |
Lieutenant
212
Rep 531
Posts |
In this guide. I dont see fuel pressure issues so no idea what log he was looking at.
Last edited by eastsidaz; 04-18-2024 at 04:42 PM.. |
04-18-2024, 07:55 PM | #5961 | |
Captain
354
Rep 609
Posts |
^fuel note was for e92 guy
Quote:
|
|
Appreciate
1
eastsidaz212.00 |
04-19-2024, 04:49 AM | #5962 |
Private
5
Rep 72
Posts
Drives: 335i n54
Join Date: Jan 2023
Location: Germany Hamburg
|
|
Appreciate
0
|
Bookmarks |
|
|