[Pseudo Nim]

Originally Posted by VNeBLOB42

If you are WOT on OTS, you should hit max boost (mid range) around 4k and it tapers down ~11 psi to redline. That how my boosts read anyway (AT). Depending on Sport or Aggressive your average peak numbers will vary.
S1 Sport +-14 ~ 11
S1 Agg +-15 ~ 11
S1+ Agg +-18 ~ 11

4K makes sense, now that I think back to it.

[shaginwagon13]

I was wondering if there was a USB adapter that I could buy that would plug into the COBB V2B cable allowing me to bridge my laptop and my car? Basically I wanted to connect my laptop to my car and wanted to use the COBB cable. Is this possible?

[RimasRS]

Originally Posted by shaginwagon13

I was wondering if there was a USB adapter that I could buy that would plug into the COBB V2B cable allowing me to bridge my laptop and my car? Basically I wanted to connect my laptop to my car and wanted to use the COBB cable. Is this possible?

It will not work. Just buy cheap D-can from ebay. And don't mess with Cobb cable.

[RimasRS]

Does anybody know how to properly measure time 0-60 using Cobb ap I've tried several times so when I'm accelerating hard from zero stop it shows nothing just symbols "-" when I'm accelerate slowly it shows the real time.

Any advice?

[shaginwagon13]

Originally Posted by RimasRS

It will not work. Just buy cheap D-can from ebay. And don't mess with Cobb cable.

Ok thanks for the help.

[VNeBLOB42]

Originally Posted by RimasRS

Does anybody know how to properly measure time 0-60 using Cobb ap I've tried several times so when I'm accelerating hard from zero stop it shows nothing just symbols "-" when I'm accelerate slowly it shows the real time.

Any advice?

Well, if you don't completely stop before you go, it doesn't work. Once you hit performance/ 0-60 then it will say stop the vehicle before moving. Or if you are already stopped you should be fine. And concourse pull through 60 and let the COBB read your results, no need to stop the COBB.

But I am sure that's not the problem? Have you updated the firmware recently? Was told the latest update a few days ago was a glitch. If so go back to the previous version and try again

Also, I am not sure, but maybe metric to standard could be an issue?

[RimasRS]

Originally Posted by VNeBLOB42

Well, if you don't completely stop before you go, it doesn't work. Once you hit performance/ 0-60 then it will say stop the vehicle before moving. Or if you are already stopped you should be fine. And concourse pull through 60 and let the COBB read your results, no need to stop the COBB.

But I am sure that's not the problem? Have you updated the firmware recently? Was told the latest update a few days ago was a glitch. If so go back to the previous version and try again

Also, I am not sure, but maybe metric to standard could be an issue?

Thanks for your response...

Well I tried different firmware already. And yes I was stopped at 0. The only time when it worked was when I reached the speed in normal driving not going WOT.
Did you tried that feature did it worked? What is your ROM?

[marv85]

Originally Posted by RimasRS

Thanks for your response...

Well I tried different firmware already. And yes I was stopped at 0. The only time when it worked was when I reached the speed in normal driving not going WOT.
Did you tried that feature did it worked? What is your ROM?

Stupid question, but are you sure you got to 60. Sometimes people stop when they read 60 on the speedometer. The speedometer is not very accurate and reads high. trying going to higher speed and see if that helps.

[RimasRS]

Originally Posted by marv85

Stupid question, but are you sure you got to 60. Sometimes people stop when they read 60 on the speedometer. The speedometer is not very accurate and reads high. trying going to higher speed and see if that helps.

Yeah actually first few pulls I thought that this can cause the problem but later I've tried going much higher than 60 but still I get not numbers but symbols like this "-" where have to be seconds.

But did you tried and did this work to you.
I never saw that somebody would post video or photos of 0-60 time. Maybe it doesn't work at all?

[marv85]

Originally Posted by RimasRS

Yeah actually first few pulls I thought that this can cause the problem but later I've tried going much higher than 60 but still I get not numbers but symbols like this "-" where have to be seconds.

But did you tried and did this work to you.
I never saw that somebody would post video or photos of 0-60 time. Maybe it doesn't work at all?

I tried this a long time ago (may be a year and half or 2 years ago). It worked fine at the time. I used it to compare stage0 and stage1.

A lot happened since, did you try asking COBB about this?

I'll try out if I get the chance today as well

[Zeph]

Well, been "gone" for a while but just did some more upgrades to the car recently and I just now downloaded all of the 402 maps (to include E30 and race). I have 100 octane pump available but I know race says 100+ and I would have a hard time actually getting a full tank of just 100 octane. I do think there is an E85 pump around here somewhere too. It looks like the E30 map might more power than the 100 octane race map? It would definitely be cheaper to blend E85 with 93 octane but I didn't know our fuel system would be able to handle it? I am FBO and completely catless. I guess, should I run the E30 map and just try to run about 1/2 E85 with 1/2 93 or should I get 100 octane and add some E85 to it and run the race map?

I know I could get a custom tune later, but I want to try something today I may go dyno this week as well to see what kinds of improvements everything makes. My new wheels are about 10 lbs. lighter than stock (and still 18's). My last dyno on aggressive + FMIC (302) was 387 rwhp and 423 rwtq on the stock wheels.

Zeph

[marv85]

Originally Posted by Zeph

Well, been "gone" for a while but just did some more upgrades to the car recently and I just now downloaded all of the 402 maps (to include E30 and race). I have 100 octane pump available but I know race says 100+ and I would have a hard time actually getting a full tank of just 100 octane. I do think there is an E85 pump around here somewhere too. It looks like the E30 map might more power than the 100 octane race map? It would definitely be cheaper to blend E85 with 93 octane but I didn't know our fuel system would be able to handle it? I am FBO and completely catless. I guess, should I run the E30 map and just try to run about 1/2 E85 with 1/2 93 or should I get 100 octane and add some E85 to it and run the race map?

I know I could get a custom tune later, but I want to try something today I may go dyno this week as well to see what kinds of improvements everything makes. My new wheels are about 10 lbs. lighter than stock (and still 18's). My last dyno on aggressive + FMIC (302) was 387 rwhp and 423 rwtq on the stock wheels.

Zeph

in terms of power, the race and E30 maps should be the same.

I find it easier to blend since I have E85 available and is cheaper then race gas.

You need 30% ethanol content, so do the math and fill your tank accordingly. Make sure not to have less then 30%... Log once you load the map to make sure all is good.

[unic66]

I was wondering as to why we have so many people selling their used Cobb APs?I have nothing against Cobb and most reviews I've read are positive about their tunes!

[VNeBLOB42]

Originally Posted by RimasRS

Yeah actually first few pulls I thought that this can cause the problem but later I've tried going much higher than 60 but still I get not numbers but symbols like this "-" where have to be seconds.

But did you tried and did this work to you.
I never saw that somebody would post video or photos of 0-60 time. Maybe it doesn't work at all?

I did it not too long ago. I'll try and remember tonight and give it a try.

ROM I8AOS

Also, I can't data log with "Boost" as the on-screen option. LOL.. All others work just fine.

[VNeBLOB42]

Originally Posted by marv85

in terms of power, the race and E30 maps should be the same.

I find it easier to blend since I have E85 available and is cheaper then race gas.

You need 30% ethanol content, so do the math and fill your tank accordingly. Make sure not to have less then 30%... Log once you load the map to make sure all is good.

+1, though i have never tried 100+ or E30 MAPs

Originally Posted by Zeph

Well, been "gone" for a while but just did some more upgrades to the car recently and I just now downloaded all of the 402 maps (to include E30 and race). I have 100 octane pump available but I know race says 100+ and I would have a hard time actually getting a full tank of just 100 octane. I do think there is an E85 pump around here somewhere too. It looks like the E30 map might more power than the 100 octane race map? It would definitely be cheaper to blend E85 with 93 octane but I didn't know our fuel system would be able to handle it? I am FBO and completely catless. I guess, should I run the E30 map and just try to run about 1/2 E85 with 1/2 93 or should I get 100 octane and add some E85 to it and run the race map?

I know I could get a custom tune later, but I want to try something today I may go dyno this week as well to see what kinds of improvements everything makes. My new wheels are about 10 lbs. lighter than stock (and still 18's). My last dyno on aggressive + FMIC (302) was 387 rwhp and 423 rwtq on the stock wheels.

Zeph

Yeah, you should love the E30 MAPs. Without an ethanol sensor, it is tough knowing exactly what the % is. Based upon E85 being 85% Ethanol and 91/93 USA Octance being 10% Ethanol, you should put about 4.5 gallons of E85 pump and 11.5 gallons of 93 or 91 (full tank). Use this calculator

http://www.intercepteft.com/calc.html

Remember, USA octane is RON+MON/2 = USA Octane, thus E85 is more like 96 USA Octane and of course 91 or 93 is 91 or 93 USA Octane.

Make sure you log some good 3rd gear pulls and see how your car responds to the E30 MAPs.

Originally Posted by unic66

I was wondering as to why we have so many people selling their used Cobb APs?I have nothing against Cobb and most reviews I've read are positive about their tunes!

Not sure about this. where are you seeing this?

[COBB Tuning]

Originally Posted by VNeBLOB42

I did it not too long ago. I'll try and remember tonight and give it a try.

ROM I8AOS

Also, I can't data log with "Boost" as the on-screen option. LOL.. All others work just fine.

@VNeBLOB42 I believe this was an issue with having too many monitors selected for datalogging. Try reverting to the default monitors or removing some monitors from your list. If that doesn't take care of it, give our techs a call and we'll get you sorted.

-Josh

[VNeBLOB42]

Originally Posted by COBB Tuning

@VNeBLOB42 I believe this was an issue with having too many monitors selected for datalogging. Try reverting to the default monitors or removing some monitors from your list. If that doesn't take care of it, give our techs a call and we'll get you sorted.

-Josh

thanks Josh,

Yes, sorry for the incomplete statement. This issue is only when the data logs are full, when only using Boost as the on screen option. As for getting past that, is there plans to fix? I believe Chris (krim) on the COBB Forums was going to get back to me but i haven't heard anything. Its really no big deal, I use CAT's now.

[COBB Tuning]

Originally Posted by VNeBLOB42

thanks Josh,

Yes, sorry for the incomplete statement. This issue is only when the data logs are full, when only using Boost as the on screen option. As for getting past that, is there plans to fix? I believe Chris (krim) on the COBB Forums was going to get back to me but i haven't heard anything. Its really no big deal, I use CAT's now.

No worries. I believe it was passed off to the software guys, but I'll check tomorrow. Krim has been travelling for shows and doing some work at one of our other locations, so he's been staying busy lol. I'll check up on it.

-Josh

[VNeBLOB42]

Originally Posted by COBB Tuning

No worries. I believe it was passed off to the software guys, but I'll check tomorrow. Krim has been travelling for shows and doing some work at one of our other locations, so he's been staying busy lol. I'll check up on it.

-Josh

10-4

thanks!

[unic66]

Originally Posted by unic66

I was wondering as to why we have so many people selling their used Cobb APs?I have nothing against Cobb and most reviews I've read are positive about their tunes!

Any feedback on this?

[skinrock]

Originally Posted by unic66

Any feedback on this?

Doesn't seem like it's particularly higher than normal...people buy and sell tunes all the time. I personally switched to Procede because I'm getting the Vishnu/FFTEC single turbo installed. That doesn't mean I didn't like my COBB, I just wanted a HP monster.

[marv85]

Originally Posted by unic66

Any feedback on this?

As skinrock said, people are always selling and buying. Some might be selling their car and moving on, others changing tunes etc...

In all cases, the amounts you see getting sold used is nothing compared to the amount being bought new. Its' perfectly normal