[CashedUpBogan]

Originally Posted by Joeyy

Why are you going from 19s to 17s? :P

To fit drag radials

[Brule]

Originally Posted by titium

cool. there was a reason why i chose Megan can't exactly remember why i think it was cause they where the only ones which had no reported issues of cluncking even after many miles (they are heaver from memory then the RE arms but that didn't bother me).

when i spoke to harold he said the order to do the arms in terms of most to least improvement should be guide rods, toe arms, camber link, upper arms. I didnt bother with the camber link (need m3 shocks) or upper arms.

I am just starting to look at upgrades for suspension and will have a loook at the guide rods .

Hp autosport are currently out of rogue Transmission mounts

[Brule]

Looking at apex wheels on group buy and they are going to cost $1780au delivered.
17x8.5 front and 17x9.5 rears.

[Brule]

Might stick with the m sport style 17s

[miro67]

There are quite a few sets of 17 inch wheels on eBay including a few msport. Didn't look at location.

[Brule]

On it, thanks

[Brule]

Rogue still havnt emailed me back about buying toe arms and transmission mounts.

Bought subframe bushings of ebay a week ago but got a email today saying.....

sorry dear customer

we currently have some issue with our supplier for the items which we can't sell it right now.

we decided do you full refund first and contact with you when we solve the problem with them.

Thanks

[Brule]

I think rogue is out of bussiness.

Tried 2 of there emails and one is not used anymore I keep getting post mail fail and there phone number does not work.

[Socket]

Would be careful sending money mate sounds like they may be going OOB???

[Brule]

I can't send money. I want too.
Got my whiteline diff bushings to install.
re ordered whiteline sub frame bushings through mrt performance in Australia

[titium]

Originally Posted by Brule

I think rogue is out of bussiness.

Tried 2 of there emails and one is not used anymore I keep getting post mail fail and there phone number does not work.

says hpa have trans mounts in stock on their website for e82. email hpa and ask but I'm 99.9% sure all bmw MT trans mounts are the same (the e46 m3 mounts fit both the e8x and e9x).

[titium]

http://www.hard-race.com.au/index.ph...product_id=898

found these the other day might interest you they are local and as far as i know they are identical to the megan racing ones i have installed (just rebranded).

had the megans for about 8 months and about 10k km of street driving, no noises or clunks working flawlessly.

[Brule]

Rogue phone works.
User error

[Brule]

Originally Posted by titium

http://www.hard-race.com.au/index.ph...product_id=898

found these the other day might interest you they are local and as far as i know they are identical to the megan racing ones i have installed (just rebranded).

had the megans for about 8 months and about 10k km of street driving, no noises or clunks working flawlessly.

There a bit different to Megan racing if you look on the shaft of both of them.

I will probably go with Megan now as rogue are hard to contact.
But I really want them mounts as everyone loves them

[Brule]

I have a few new parts on the way. Should have them all installed bar the evos before gazzanats.July 2-3

Sorted out the trans mounts with rogue. It took a long time for them to respond but the mounts are on there way.

Red line mt90.75-90

Sub frame bushings from whiteline

Diff bushings from whiteline

Kwv3 hanging to put these in.

Msport 17s

Hoosier 2 rear 275 40 17s

In a few weeks I'm pulling stealths out after gazzanats and putting in evos.

[Brule]

Looking a buying pi and camber plates next week.

[DR-JEKL]

Jeez you'll be doing F1 pitstop times for turbo replacements with all the practice you'll have by now!!!

Definitely one of the most serious setups on this forum!!

[Socket]

why new turbos bro

[Brule]

Planned to get evos before I got stealths.

Just the next step up I guess.

They have large outlet plumbing so should be on par with US car power.

[Brule]

VTT has logs of a hpfp running 3800psi flatline across rpm range on 25psi on e85.

No meth, PI just DI.

Not sure what he's current setup is got but if PI is not needed anymore that's good for everyone.

I might hold off on PI

[Brule]

Doing some maintenance.

Oil change
Transmission oil change
Diff bushing install
New tyres

[Brule]

Just got some cheapo 19s for gazzanats, $330 delivered.

Cant wait for the other stuff