[Jose_JN]

Originally Posted by mike1973

I have a e91 build 2007/02 and would like to do this retrofit as well, I have a profesional HU but I don't have USB nor Bluetooth so if I understand you correctly all I have to do is purchase a HU form built 2010 onwards with USB and Bluetooth and code the kombi and rad2 with $633, $6nn and $6fl, correct?

That would be so sweet if it were that simple Hoping to hear from you

Yes, that is all.
But you have a mistake, it is &663 not $633.

You have also to buy the mic, the usb plug and the wires for that. (It cost aroun 100€~140€ at your dealer: plug, mic and wiring.)

Regards!

[mike1973]

Originally Posted by Jose_JN

Yes, that is all.
But you have a mistake, it is &663 not $633.

You have also to buy the mic, the usb plug and the wires for that. (It cost aroun 100€~140€ at your dealer: plug, mic and wiring.)

Regards!

Thanks again.

Will the voice commands be active using the steering wheel controls? Do I have to activate anything else besides the coding of the RAD2 to enable the steering wheel functions for telephone?

[Jose_JN]

Voice command will work without doing anything else

But they could be in other languaje.

Regards.

[KiX1911]

What if I only want the newer dong? Do I still need to buy the USB/bluetooth adapters HU?

I have a 2007 professional HU right now with the crappy dong

Brad

[Jose_JN]

Originally Posted by Killerx

What if I only want the newer dong? Do I still need to buy the USB/bluetooth adapters HU?

I have a 2007 professional HU right now with the crappy dong

Brad

I Brad,

You need a head unit from 09/2007 or newer if you want the new dong...
If your hu is older than this date, you cannot enable it

Which is the date of the HU? (it is written at the sticker)

Regards!

[VMRWheels]

Very cool that you made videos as well! Great work!

[2002]

Jose,

So, what do I need to add USB to my 2009 328i with Pro Audio Head Unit? It now has an AUX In in the console. All I want is to add the USB flash drive reader capability - no mic or Bluetooth for a phone.

Looks like I need to buy these part numbers:

84109237653 USB-Aux Socket
61119129360 Coaxial fakra wire for USB

Do I need to code the radio? If I do, what OBD unit, and what software for Win7?

Thanks for any help!

[woodpecka]

Thank you for all the info.

I have an E91 2006 and want the Bluetooth, USB and the new gong. I didn't want to install the complex MULF or TCU modules as they are too complicated and expensives to install. Also, my old CD73 radio display has lost some pixels so it's time for a radio swap!

I have ordered a new HU on EBAY, USB cable, socket and Y cable. The radio is coming with a compatible micro so I will see if I need a genuine BMW or not.

Cheers!

[Jose_JN]

Originally Posted by 2002

Jose,

So, what do I need to add USB to my 2009 328i with Pro Audio Head Unit? It now has an AUX In in the console. All I want is to add the USB flash drive reader capability - no mic or Bluetooth for a phone.

Looks like I need to buy these part numbers:

84109237653 USB-Aux Socket
61119129360 Coaxial fakra wire for USB

Do I need to code the radio? If I do, what OBD unit, and what software for Win7?

Thanks for any help!

You better should to remove it before buying the parts and see if there is a white empty connector behind it and a Bluetooth logo on the top of the HU.

I think your hu is not USB capable... better check it.

If you are lucky, order only the parts you said (buy the mic and the wires for it too... more features, better car )

Regards!

[woodpecka]

I got the radio...everything works fine exepting the Voice Command. The sound is too loud and in German. I tried to lower the sound when it speek but no impact.

I can't code the radio 2URAD (read / write) with NCS...anybody found a way with Tool32 or anything else?

[woodpecka]

I tried to add $6nn, $6fl, $644, $620 to the VO,
FA_Write the CAS and FRM,
Process CAR / Code CAR (2 times)
SG_Reset or coding the 2URAD

I always get this error:


I don't think I have a 2MULF but as I see it in my ECUs, I tried to reset / code it also....didn't work.

Anyone found a way to reset the 2URAD so I can get the English Voice Control and reducing the sound level. (The gong and voice control are too loud, still at -5)


This is the error log:

ERROR! Modul: CDH.C, Proc: CDHCheckIdent, LineNr: 03, ErrorNr: 2041
COAPI-2041: wrong ecu coding index
A_E65MMI: CODIERINDEX = 34h
RAD2.C03: CODIERINDEX = 03

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2041
SG_CODIEREN

ERROR! Modul: LFCDHDIA.CPP (A_E65DR.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_E65DR

>> ERROR! Modul: LFCDHDIA.CPP (A_E65DR.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
SYS-0005: OBJECT FILE NOT FOUND

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
SG_CODIEREN

Update: Looks like that "COAPI-2041: wrong ecu coding index" mean that I have to update my DATEN file in NCS. I will try this and let you know.

Update 2: I fixed the read/write issue by updating my DATEN files. I did a reset of the radio and now the sound level is perfect. But, I lost the USB and BT no matter if I have the $663, $6FL, $644 and $6nn in my VO.

[2002]

Jose,

Thanks for the tip. No USB on back of the radio. I'll have to settle for just AUX in.

Regards

[4EST]

Originally Posted by Jose_JN

Other e9x and e8x:
61138377072 x1 -> 3 pins Connector
61130005197 x4 -> Female Pin
61138384550 x1 -> 12 pins Female Connector
61138387206 x1 -> Connector housing
84316938762 x1 -> mic
84106936148 x1 -> Mic housing
61119129360 x1 -> Coaxial fakra wire for USB
84109237653 x1 -> USB/Aux Socket

Hello
I just ordered a radio unit with bluetooth and it will be sent with a microphone, here is the picture:


Now I imagine I don't have to get all the part list above, I imagine I should remove the mic and some connectors from the list
Can you tell me which one to remove?

Thanks

[woodpecka]

Guys, I have been able to re-active the BT by changing the MAN file manually. I don't understand why my VO doesn't do the job.

Now I have the BT and USB2 but miss the USB and Voice Command. Anybody can send me his 2RAD or 2URAD MAN file?

Cheers

[QUiKSR20]

Hey guys, I have read this whole thread and searched for a bunch of threads but still unsure.. If I have an 08 w/OEM HiFi.. I have bluetooth and sirius radio + the 10 speaker setup.

I want to add usb/ipod connectivity.

Is there anything else I need besides :

CODING
2010+ head unit w/bluetooth & usb built in
USB Plug + wire to connect to head unit?

Is that all I need or will that even work?

Thanks,
Daryl

[4EST]

you need HU with Sirius, and maybe fiber optic?

[woodpecka]

Originally Posted by 4EST

Hello
I just ordered a radio unit with bluetooth and it will be sent with a microphone, here is the picture:

Now I imagine I don't have to get all the part list above, I imagine I should remove the mic and some connectors from the list
Can you tell me which one to remove?

Thanks

I just ordered the same kit on ebay but the microphone bag was empty. Looks like someone took it out.
I opened a dispute on paypal and expect to get a new one. I will see.

[4EST]

hopefully it won't come out of my bag

[woodpecka]

Originally Posted by 4EST

hopefully it won't come out of my bag

Let me know how it goes. All option were on the radio but I had to reset it to my car sound level. I lost everything but managed to bring back the USB with the $6fl VO but not the BT with $6nn. I wonder as this radio is recent, if another VO code exist to add the BT.

By playing with the MAN file, I brought back the BT but as I don't have my microphone, I can't confirm that all is working properly. If you have the same issue than me, I can give you my file.

[4EST]

what was the problem with the sound? do you have a hifi sound?
Did you reset 2RAD?

BTW, I noticed they upped the price quite a bit after my purchase, by 100 USD. Only for the FO model

[woodpecka]

Originally Posted by 4EST

what was the problem with the sound? do you have a hifi sound?
Did you reset 2RAD?

BTW, I noticed they upped the price quite a bit after my purchase, by 100 USD. Only for the FO model

The sound was set for a normal business non-hifi. Our hifi needs a lower output so the sound was too loud. After the reset, all the sound setup is perfect.

It would be very nice if you can read and copy the default setup before doing a reset..I would like to know what were the values.

Yes I bought the same and notice the cost increaee on his last item...it's crazy!

Btw our radio is the new 2urad, not 2rad.

[Jose_JN]

Originally Posted by 4EST

Hello
I just ordered a radio unit with bluetooth and it will be sent with a microphone, here is the picture:


Now I imagine I don't have to get all the part list above, I imagine I should remove the mic and some connectors from the list
Can you tell me which one to remove?

Thanks

Bluetooth:
Depending on the production date of your car, you could need (or not):
61138384550 x1 -> 12 pins Female Connector
61138387206 x1 -> Connector housing
But they only cost a few bucks.


For USB you still need:
61119129360 x1 -> Coaxial fakra wire for USB
84109237653 x1 -> USB/Aux Socket
This cost around 80 bucks

Regards.