Considering Supersprint Exhaust....

Gardus · 03-08-2013, 02:21 AM

Quote:

Originally Posted by FormerRotor

Will the DPF removal (down pipe) work on the us spec rides?

Thanks!

Only if you can tune the ECU to remove all the DPF-related stuff.
The US spec is different from the EU spec as said here on the forum.

FormerRotor · 03-08-2013, 05:16 AM

Quote:

Originally Posted by Gardus

Only if you can tune the ECU to remove all the DPF-related stuff.
The US spec is different from the EU spec as said here on the forum.

Indeed, but the pipe will fit properly?

Thanks!

Gardus · 03-08-2013, 05:17 AM

Send me a PM with your chassis number, I'll check.

FormerRotor · 03-08-2013, 05:28 AM

Quote:

Originally Posted by Gardus

Send me a PM with your chassis number, I'll check.

Don't know if I have it handy. It's a 2011 e90 335d (us)

Gardus · 03-08-2013, 05:47 AM

US Spec 335d E90 LC1
DPF: 18 30 8 512 290 OR 18 30 7 808 655
Entry pipe ring 18 20 7 793 677
Exit pipe gasket 18 30 7 812 171

EU Spec E90 LC1 335d
DPF: 18 30 8 508 523
Entry pipe ring 18 20 7 793 677
Exit pipe ring 18 30 7 793 766 (inside diameter 76mm)

It will need some considerable effort to fit our downpipe.
The USA spec 335d has a two holes flange while the EU spec has a simple pipe.
You will be missing a lot of the sensor bungs...

Puerto Rican 335d · 03-08-2013, 05:57 AM

GARDUS if you can pull this one out Im in for a buy at a reasonable price though!! Sheit I wish I was in Civateveccia eating the Potato Pizza with some BIRRA!!!

Gardus · 03-08-2013, 06:35 AM

Here's what we can do:

Ask the company who is going to do the ECU tune which sensors must be plugged in and which ones can be detatched.
If the ones that fit on our downpipe are enough it'll be possible to fit it.
Basically you need to know if they can make your car work as a EU spec 335d on the electronic side.

To solve the flange/pipe difference issue the only solution that comes to my mind is that you buy the front and centre pipes too.
You can purchase from Evolve, ask them a quote.

The parts you will need are:
046011 downpipe:
http://www.supersprint.com/en/prod-c...th_filter.aspx
980242 front pipes
http://www.supersprint.com/en/prod-c...nt_pipe_y.aspx
980213
http://www.supersprint.com/en/prod-c...pipes_kit.aspx

You can fit them with the stock rear mufflers OR buy our racing mufflers too, with dual 90mm (046144 + 046124) or four exits (046106 + 046136).

Puerto Rican 335d · 03-08-2013, 06:42 AM

GARDUS our system is way diferent than yours our ECU are ENCRYPTED!!

Gardus · 03-08-2013, 10:11 AM

Maybe some tuning company will come up and fix this.
I guess the only alternative would be to buy a EU spec ECU, program it to the specific car and then remap it..I don't know if it's feasible, I work at exhaust systems!!

Puerto Rican 335d · 03-08-2013, 10:20 AM

good idea but once it runs thru BMWoA dealers it will be noticed unfortunately

Gardus · 03-08-2013, 10:33 AM

I'm always speaking in terms of warrany expired (or not caring about it).

Puerto Rican 335d · 03-08-2013, 10:36 AM

LOL we forgot about that ok amigo

doh · 04-05-2013, 01:47 PM

someone have the Supersprint "Race" version for the 335i ?

experience, maybe a sound video

thx

frackje · 04-06-2013, 05:45 AM

Quote:

Originally Posted by doh

someone have the Supersprint "Race" version for the 335i ?

experience, maybe a sound video

thx

Better go for the Performance exhaust for a 335i, best sound you'll ever find.

I'm going for a 2,5" custom exhaust for my 335D. Hope to get some last gains in power.

doh · 04-06-2013, 12:50 PM

dont like the performance exhaust.. sounds like a tractor, not like an BMW 6 rows cylinder.. no offense

i had a supersprint Racing leightweight @ E46 M3.. it was just amazing..

Paul@Evolve · 04-08-2013, 05:19 AM

We have this one - none of just the Racing system on its own though:

Puerto Rican 335d · 04-08-2013, 07:06 AM

Paul on a "D" please not a GASSER!! Gracias!!

Paul@Evolve · 04-08-2013, 07:14 AM

Quote:

Originally Posted by doh

someone have the Supersprint "Race" version for the 335i ?

experience, maybe a sound video

thx

Quote:

Originally Posted by Puerto Rican 335d

Paul on a "D" please not a GASSER!! Gracias!!

It was in response to above

Unfortunately don't have one for the big D.

Puerto Rican 335d · 04-08-2013, 07:20 AM

no problemo but try to see if you guys can come up with soemthing for us!!

czar0328 · 02-25-2017, 05:58 PM

i never really post just kind of browse around and try to gather as much knowledge and i know this is a super old post but im in the markey for the down pipe now just got my wagner FMIC in yesterday and im looking between the wagner and supersprint but im not able to find a post of different people comparing them if there is one and im just not looking good enough MY APOLOGIES!!!

please correct me if im wrong

FMIC / catless down pipe / ecu coding for the DPF

then flash ECU

?!?!?

Torqu3 · 02-25-2017, 06:47 PM

Quote:

Originally Posted by czar0328

i never really post just kind of browse around and try to gather as much knowledge and i know this is a super old post but im in the markey for the down pipe now just got my wagner FMIC in yesterday and im looking between the wagner and supersprint but im not able to find a post of different people comparing them if there is one and im just not looking good enough MY APOLOGIES!!!

please correct me if im wrong

FMIC / catless down pipe / ecu coding for the DPF

then flash ECU

?!?!?

Everyone here tends to use the same brands for everything. Supersprint isn't a common one. Wagner makes a good FMIC, and I know many use it. There are a few other options. As for downpipes, there are many. AARodriguez carries one, and there is one other option i believe. Whenever you get tuned, tell them you have removed the DPF and they should code it out, no need to "code" the ECU, then flash it. Hit up the people at Bimmer Performance Center, or AARodriguez and they'll tell you everything you could want to know. Also, if you're removing the DPF, you need to remove the SCR too.

EDIT: AND READ THE STICKIES. There are 2 or 3 different threads discussing tuning and upgrade options. We worked hard to pick the best threads for stickies.

Gardus · 02-26-2017, 12:25 PM

Quote:

Originally Posted by czar0328

i never really post just kind of browse around and try to gather as much knowledge and i know this is a super old post but im in the markey for the down pipe now just got my wagner FMIC in yesterday and im looking between the wagner and supersprint but im not able to find a post of different people comparing them if there is one and im just not looking good enough MY APOLOGIES!!!

please correct me if im wrong

FMIC / catless down pipe / ecu coding for the DPF

then flash ECU

?!?!?

Hi there... wow quite an old thread.. in the mean time I no longer work at Supersprint but I still deal with them as a dealer (in Italy).

If you go back to the previous posts, it was said that the 335d US-Spec and the EU-Spec are quite different. Check cssnms post, 1st page.
The shape of the downpipe and front section (which includes SCR / ADblue injection) are different.. If you can have the ECU tuned so you just make the lambda sensor or mayb just the 1st pressure work, you can fit a full EU-Spec system, as the centre and rear bracket are the same.

In the case of Supersprint you can fit:

046011
980242
980213
046024
046044
http://www.supersprint.com/ww-it/bmw...86-hp-06-.aspx

It would be even better to have the rear section unsilenced, straight pipes.

I found this, JR Autotuning can provide the DPF-delete tuning and "Unobtanium welding" the US-Spec DPF-delete downpipe and SCR-delete front pipe.
I think the 2nd company can probably provide also the rear silencers in pipe-only version, for the best sound, just ask them.
http://www.fixmyvw.com/bmw-335d-down...5-unobtainium/
http://www.fixmyvw.com/delete-bmw-33...e-unobtainium/
http://www.fixmyvw.com/bmw-335d-ecu-...g-performance/
You can probably save money contacting the two companies directly instead of going through fixmyvw
https://www.facebook.com/JR-Auto-Per...0761793294453/
http://higherarcing.org/

03-08-2013, 05:17 AM	#47
Gardus Private 3 Rep 84 Posts Drives: Megane RS 250 Cup Join Date: Jun 2011 Location: Mantova/Brescia, Italy iTrader: (0)	Send me a PM with your chassis number, I'll check.
	Appreciate 0 Quote

03-08-2013, 05:47 AM	#49
Gardus Private 3 Rep 84 Posts Drives: Megane RS 250 Cup Join Date: Jun 2011 Location: Mantova/Brescia, Italy iTrader: (0)	US Spec 335d E90 LC1 DPF: 18 30 8 512 290 OR 18 30 7 808 655 Entry pipe ring 18 20 7 793 677 Exit pipe gasket 18 30 7 812 171 EU Spec E90 LC1 335d DPF: 18 30 8 508 523 Entry pipe ring 18 20 7 793 677 Exit pipe ring 18 30 7 793 766 (inside diameter 76mm) It will need some considerable effort to fit our downpipe. The USA spec 335d has a two holes flange while the EU spec has a simple pipe. You will be missing a lot of the sensor bungs...
	Appreciate 0 Quote

03-08-2013, 05:57 AM	#50
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	GARDUS if you can pull this one out Im in for a buy at a reasonable price though!! Sheit I wish I was in Civateveccia eating the Potato Pizza with some BIRRA!!! __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

03-08-2013, 06:35 AM	#51
Gardus Private 3 Rep 84 Posts Drives: Megane RS 250 Cup Join Date: Jun 2011 Location: Mantova/Brescia, Italy iTrader: (0)	Here's what we can do: Ask the company who is going to do the ECU tune which sensors must be plugged in and which ones can be detatched. If the ones that fit on our downpipe are enough it'll be possible to fit it. Basically you need to know if they can make your car work as a EU spec 335d on the electronic side. To solve the flange/pipe difference issue the only solution that comes to my mind is that you buy the front and centre pipes too. You can purchase from Evolve, ask them a quote. The parts you will need are: 046011 downpipe: http://www.supersprint.com/en/prod-c...th_filter.aspx 980242 front pipes http://www.supersprint.com/en/prod-c...nt_pipe_y.aspx 980213 http://www.supersprint.com/en/prod-c...pipes_kit.aspx You can fit them with the stock rear mufflers OR buy our racing mufflers too, with dual 90mm (046144 + 046124) or four exits (046106 + 046136).
	Appreciate 0 Quote

03-08-2013, 06:42 AM	#52
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	GARDUS our system is way diferent than yours our ECU are ENCRYPTED!! __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

03-08-2013, 10:11 AM	#53
Gardus Private 3 Rep 84 Posts Drives: Megane RS 250 Cup Join Date: Jun 2011 Location: Mantova/Brescia, Italy iTrader: (0)	Maybe some tuning company will come up and fix this. I guess the only alternative would be to buy a EU spec ECU, program it to the specific car and then remap it..I don't know if it's feasible, I work at exhaust systems!!
	Appreciate 0 Quote

03-08-2013, 10:20 AM	#54
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	good idea but once it runs thru BMWoA dealers it will be noticed unfortunately __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

03-08-2013, 10:33 AM	#55
Gardus Private 3 Rep 84 Posts Drives: Megane RS 250 Cup Join Date: Jun 2011 Location: Mantova/Brescia, Italy iTrader: (0)	I'm always speaking in terms of warrany expired (or not caring about it).
	Appreciate 0 Quote

03-08-2013, 10:36 AM	#56
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	LOL we forgot about that ok amigo __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

04-05-2013, 01:47 PM	#57
doh New Member 0 Rep 5 Posts Drives: E46 M3 Join Date: Apr 2013 Location: Germany iTrader: (0)	someone have the Supersprint "Race" version for the 335i ? experience, maybe a sound video thx
	Appreciate 0 Quote

04-06-2013, 12:50 PM	#59
doh New Member 0 Rep 5 Posts Drives: E46 M3 Join Date: Apr 2013 Location: Germany iTrader: (0)	dont like the performance exhaust.. sounds like a tractor, not like an BMW 6 rows cylinder.. no offense i had a supersprint Racing leightweight @ E46 M3.. it was just amazing..
	Appreciate 0 Quote

04-08-2013, 05:19 AM	#60
Paul@Evolve Private First Class 74 Rep 176 Posts Drives: BMWs Join Date: Feb 2013 Location: Bedfordshire iTrader: (0)	We have this one - none of just the Racing system on its own though:
	Appreciate 0 Quote

04-08-2013, 07:06 AM	#61
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	Paul on a "D" please not a GASSER!! Gracias!! __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

04-08-2013, 07:20 AM	#63
Puerto Rican 335d Brigadier General 231 Rep 3,488 Posts Drives: Montego Blue 335d Join Date: Jun 2011 Location: Puerto Rico(Dominican Republic 03/2017) iTrader: (0)	no problemo but try to see if you guys can come up with soemthing for us!! __________________ RENNtech Flash(Lenny Wu)/WAGNER IC Enkei Rajin 18"/Execuhitch Hitch/Koni FSD Soft Ride Bike Rack/Brava Synthetic Motor Oil(Made in Puerto Rico)/Meth(in the works)/CBU done w Andrew EGR Race Pipe (whoa! what an animal it is now)
	Appreciate 0 Quote

02-25-2017, 05:58 PM	#64
czar0328 New Member 0 Rep 5 Posts Drives: 2011 335d Join Date: Dec 2014 Location: SOUTH FLORIDA iTrader: (0)	wow so much head ache i never really post just kind of browse around and try to gather as much knowledge and i know this is a super old post but im in the markey for the down pipe now just got my wagner FMIC in yesterday and im looking between the wagner and supersprint but im not able to find a post of different people comparing them if there is one and im just not looking good enough MY APOLOGIES!!! please correct me if im wrong FMIC / catless down pipe / ecu coding for the DPF then flash ECU ?!?!?
	Appreciate 0 Quote