DIY: 328i 3-stage intake manifold conversion

fleetfoot · 04-20-2017, 02:43 PM

I believe the stock 328i manifold part number is 11617559524

According to Turner Motorsport: E90 330i N52B30H0 intake manifold (new), 11617559523

I've done the swap myself, and I promise the two parts are very different. Check out this comparison picture:

KnudsonM3 · 04-20-2017, 04:19 PM

http://www.realoem.com/bmw/enUS/show...diagId=11_3756

N51 manifolds have the same part number.

Terraphantm · 04-20-2017, 04:48 PM

You didn't specify N51 until that last post...

fleetfoot · 04-20-2017, 04:55 PM

Yeah if you have an N51 engine, then that's a completely different story. This thread is centered around N52 engines.

The website you referenced (realoem.com) doesn't make it abundantly clear which engine it's showing you. From the URL I see "USA-08-2007-E90-BMW-328" which would have to be N52, since the N51 wasn't sold in the USA. If this is an N52 diagram, then in this case realoem appears to be inaccurate. These well-known BMW parts sites all list the part number for the stock E92 328i N52B30 intake manifold as 11617559524

https://parts.bmwofsouthatlanta.com/...617559524.html

https://www.fcpeuro.com/products/bmw...ld-11617559524

https://www.turnermotorsport.com/p-3...uine-bmw-part/

Terraphantm · 04-20-2017, 06:10 PM

N51 was sold in the US. It's the SULEV 128/328i, which does come with a 3-stage.

fleetfoot · 04-20-2017, 06:59 PM

Quote:

Originally Posted by Terraphantm

N51 was sold in the US. It's the SULEV 128/328i, which does come with a 3-stage.

Ahhh I was thinking of the N53

KnudsonM3 · 04-21-2017, 12:41 AM

Quote:

Originally Posted by Terraphantm

You didn't specify N51 until that last post...

You're right. I mentioned the 330 and 328 manifolds had the same part numbers and didn't convey that.

Apologies for the miscommunication.

Blueeyesredpanda · 05-22-2017, 12:58 AM

Can you update the pics please

fleetfoot · 05-22-2017, 05:45 AM

Quote:

Originally Posted by Blueeyesredpanda

Can you update the pics please

The pelican parts DIY has excellent pictures.

triax37 · 05-31-2017, 11:24 AM

Q: there is an N51 engine being sold locally. Is it crazy to try to grab the parts from that motor, then install on my 92k N52? Good time to replace lots of gaskets, anyway...

BTW - I am a relative novice on motor repairs. I have only replaced belts and pulleys. But I am always up for a good challenge!

luckyJ · 10-12-2017, 12:34 PM

I just purchased a used 3stage manifold from a 2007 330i. I have a 2012 328 with single stage. I noticed there is a single CCV outlet on the 330i intake while mine has a dual CCV outlet. Is it still possible to use the single CCV mani on my car? Do I need to change anything to make the conversion work? Thank you

hassmaschine · 10-12-2017, 01:00 PM

Quote:

Originally Posted by triax37

Q: there is an N51 engine being sold locally. Is it crazy to try to grab the parts from that motor, then install on my 92k N52? Good time to replace lots of gaskets, anyway...

BTW - I am a relative novice on motor repairs. I have only replaced belts and pulleys. But I am always up for a good challenge!

not at all. It really wasn't that bad to swap out - the worst part was dealing with the CCV, but on your engine it's inside the valve cover so it should be easier. I would still expect to replace all of the plastic hoses that go to the manifold, as they are likely to break.

Jonas.Steffen · 04-24-2018, 04:50 PM

Quote:

Originally Posted by luckyJ

I just purchased a used 3stage manifold from a 2007 330i. I have a 2012 328 with single stage. I noticed there is a single CCV outlet on the 330i intake while mine has a dual CCV outlet. Is it still possible to use the single CCV mani on my car? Do I need to change anything to make the conversion work? Thank you

Im hoping to do this upgrade on my 2012 e92 328i too, did you find any solution to this? I feel like I will likely run into the same thing...

luckyJ · 04-24-2018, 10:54 PM

Quote:

Originally Posted by Jonas.Steffen

Quote:

Originally Posted by luckyJ

I just purchased a used 3stage manifold from a 2007 330i. I have a 2012 328 with single stage. I noticed there is a single CCV outlet on the 330i intake while mine has a dual CCV outlet. Is it still possible to use the single CCV mani on my car? Do I need to change anything to make the conversion work? Thank you

Im hoping to do this upgrade on my 2012 e92 328i too, did you find any solution to this? I feel like I will likely run into the same thing...

Just buy a rubber plug at Home Depot and fit shut one of the Y shaped CCV hoses coming from the valve cover. Or u can source a 3 SIM that has dual ports

Indyeah · 05-22-2018, 07:13 PM

Im a little confused on the wiring for this upgrade. If the old manifold doesn't have DISA valves then where does the wiring come from when you swap in the 3 stage one?

hassmaschine · 05-22-2018, 07:54 PM

The wires are already there. The plugs are just capped off.

Jagaer · 06-01-2018, 06:55 AM

Since I just suffered from the PCV Heater failure (https://www.e90post.com/forums/showp...&postcount=302 ), and the recall isn't issued in Canada, I figured I might as well swap over to a 3IM at the same time.

Picked up the 3IM on eBay from a California N51 for $200 USD ($260 CAD) + $60 CAD Shipping and Duties.

I followed the PelicanParts guide , but ran into a few issues, so thought extra pics and info might help out others.

First issue I ran into was getting the wiring box off from under the Throttle Body. I ended up removing the Throttle Body to get a better look at the wiring box.

The Metal "slides" were rusted, and even when the tabs were pushed down, the box wouldn't come off. I ended up needing to spray a bit of Liquid Wrench on the slides to help remove the rust and allow the box to come off.

This is about as far as you can pull the manifold before you need to remove the other cables/hoses.

Behold all the space!. This is a good time to do your OFHG if you haven't done it. Much easier to get at the OFHG bolts with the manifold out of the way.

Single vs Three-Stage Intake

On reinstall, I forgot to plug in the Pre-Cat O2 Sensors. Remember to plug *everything* in.

One benefit of the N52 over the N54...look at how clean those intake valves are after 150k kms

Done (Have a beer)

vilord · 06-01-2018, 08:47 AM

Congrats! Also yikes on the PCV heater short!

bluewater328 · 08-20-2018, 03:22 PM

For those of you who have done the 3-stage conversion, would a failure of some part (ie new DISA) of this be ODB code-readable or logical? Or if something hiccups with the engine, I'm guessing and this could be a logical guess? Or will it just (probably) pull a single code about "A" DISA failure?

hassmaschine · 08-20-2018, 04:23 PM

there are codes for individual DISA flaps. That tells you if the DISA solenoid is working, but it doesn't tell you if the flap is broken etc.

bluewater328 · 08-20-2018, 05:17 PM

Quote:

Originally Posted by hassmaschine

there are codes for individual DISA flaps. That tells you if the DISA solenoid is working, but it doesn't tell you if the flap is broken etc.

So with the addition of the new DISA module, this would show up individually (automatically)? OR is that only after a ECU reprogram?

hassmaschine · 08-20-2018, 05:43 PM

Only after a reprogram - but beware. Some tuners don't necessarily enable those codes, so they would never trigger.

04-20-2017, 02:43 PM	#45
fleetfoot Second Lieutenant 198 Rep 289 Posts Drives: 2017 M2, 2013 E92 328i Join Date: Apr 2013 Location: Atlanta,GA iTrader: (1)	I believe the stock 328i manifold part number is 11617559524 According to Turner Motorsport: E90 330i N52B30H0 intake manifold (new), 11617559523 I've done the swap myself, and I promise the two parts are very different. Check out this comparison picture: __________________ 2017 F87 M2: MGM, 6MT, AA Tune, Eibach Pro-Kit, Fabspeed Catted Downpipe, Evolution Racewerks FMIC+Chargepipe, Autosolutions SSK, CDV Delete, Vorshlag Plates, PFC-08 pads, Apex EC-7 18x9.5" 2013 E92 328i M-Sport: BSM, 6MT, 3IM+AA Tune, BMW PE, M3 control arms, Bilstein B12 Pro-Kit, BMW SSK, CDV Delete, Apex EC-7 18x9"
	Appreciate 0 Quote

04-20-2017, 04:19 PM	#46
KnudsonM3 MAGA 39 Rep 159 Posts Drives: 99 M3, F15, F30 Join Date: Jul 2015 Location: PNW iTrader: (0)	http://www.realoem.com/bmw/enUS/show...diagId=11_3756 N51 manifolds have the same part number. Last edited by KnudsonM3; 04-23-2017 at 03:58 PM..
	Appreciate 0 Quote

04-20-2017, 04:48 PM	#47
Terraphantm Captain 253 Rep 775 Posts Drives: E46 M3 Coupe Join Date: Apr 2009 Location: N/A iTrader: (1)	You didn't specify N51 until that last post...
	Appreciate 0 Quote

04-20-2017, 04:55 PM	#48
fleetfoot Second Lieutenant 198 Rep 289 Posts Drives: 2017 M2, 2013 E92 328i Join Date: Apr 2013 Location: Atlanta,GA iTrader: (1)	Yeah if you have an N51 engine, then that's a completely different story. This thread is centered around N52 engines. The website you referenced (realoem.com) doesn't make it abundantly clear which engine it's showing you. From the URL I see "USA-08-2007-E90-BMW-328" which would have to be N52, since the N51 wasn't sold in the USA. If this is an N52 diagram, then in this case realoem appears to be inaccurate. These well-known BMW parts sites all list the part number for the stock E92 328i N52B30 intake manifold as 11617559524 https://parts.bmwofsouthatlanta.com/...617559524.html https://www.fcpeuro.com/products/bmw...ld-11617559524 https://www.turnermotorsport.com/p-3...uine-bmw-part/ __________________ 2017 F87 M2: MGM, 6MT, AA Tune, Eibach Pro-Kit, Fabspeed Catted Downpipe, Evolution Racewerks FMIC+Chargepipe, Autosolutions SSK, CDV Delete, Vorshlag Plates, PFC-08 pads, Apex EC-7 18x9.5" 2013 E92 328i M-Sport: BSM, 6MT, 3IM+AA Tune, BMW PE, M3 control arms, Bilstein B12 Pro-Kit, BMW SSK, CDV Delete, Apex EC-7 18x9" Last edited by fleetfoot; 04-20-2017 at 05:06 PM..
	Appreciate 0 Quote

04-20-2017, 06:10 PM	#49
Terraphantm Captain 253 Rep 775 Posts Drives: E46 M3 Coupe Join Date: Apr 2009 Location: N/A iTrader: (1)	N51 was sold in the US. It's the SULEV 128/328i, which does come with a 3-stage.
	Appreciate 0 Quote

05-22-2017, 12:58 AM	#52
Blueeyesredpanda Major 412 Rep 1,425 Posts Drives: E90 / F30 Join Date: Sep 2016 Location: Canada iTrader: (-2)	Can you update the pics please __________________ 3IM . Okada Plasma Direct . Euro Ram Intake . AA header (Pending) . PE . 2nd Cat Delete . F30 340mm 6 pot . EBC Yellow Stuff . StopTech SS Brake Line . BMW Performance CF Strut Bar. 219M . PSS
	Appreciate 0 Quote

05-31-2017, 11:24 AM	#54
triax37 First Lieutenant 142 Rep 328 Posts Drives: 2017 F31, 2014 F15, 2002 M3 Join Date: Oct 2016 Location: Denver, CO iTrader: (1)	Q: there is an N51 engine being sold locally. Is it crazy to try to grab the parts from that motor, then install on my 92k N52? Good time to replace lots of gaskets, anyway... BTW - I am a relative novice on motor repairs. I have only replaced belts and pulleys. But I am always up for a good challenge!
	Appreciate 0 Quote

10-12-2017, 12:34 PM	#55
luckyJ Private First Class 53 Rep 172 Posts Drives: Porsche 993 Join Date: Apr 2016 Location: SoCal iTrader: (2)	I just purchased a used 3stage manifold from a 2007 330i. I have a 2012 328 with single stage. I noticed there is a single CCV outlet on the 330i intake while mine has a dual CCV outlet. Is it still possible to use the single CCV mani on my car? Do I need to change anything to make the conversion work? Thank you __________________ 2014 F30 328i N26 2012 e91 Mtech 1997 993 Targa...sold 1991 964 C4....sold
	Appreciate 0 Quote

05-22-2018, 07:13 PM	#59
Indyeah First Lieutenant 143 Rep 375 Posts Drives: E92 328i 6MT SGM Join Date: Jun 2016 Location: Phoenix AZ iTrader: (0)	Im a little confused on the wiring for this upgrade. If the old manifold doesn't have DISA valves then where does the wiring come from when you swap in the 3 stage one?
	Appreciate 0 Quote

05-22-2018, 07:54 PM	#60
hassmaschine Major General 3985 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	The wires are already there. The plugs are just capped off.
	Appreciate 1 Indyeah142.50 Quote

06-01-2018, 06:55 AM	#61
Jagaer Private First Class 463 Rep 170 Posts Drives: 2011 E91 328xi 6MT Join Date: Aug 2017 Location: Kingston, Ont iTrader: (0)	Since I just suffered from the PCV Heater failure (https://www.e90post.com/forums/showp...&postcount=302 ), and the recall isn't issued in Canada, I figured I might as well swap over to a 3IM at the same time. Picked up the 3IM on eBay from a California N51 for $200 USD ($260 CAD) + $60 CAD Shipping and Duties. I followed the PelicanParts guide , but ran into a few issues, so thought extra pics and info might help out others. First issue I ran into was getting the wiring box off from under the Throttle Body. I ended up removing the Throttle Body to get a better look at the wiring box. The Metal "slides" were rusted, and even when the tabs were pushed down, the box wouldn't come off. I ended up needing to spray a bit of Liquid Wrench on the slides to help remove the rust and allow the box to come off. This is about as far as you can pull the manifold before you need to remove the other cables/hoses. Behold all the space!. This is a good time to do your OFHG if you haven't done it. Much easier to get at the OFHG bolts with the manifold out of the way. Single vs Three-Stage Intake On reinstall, I forgot to plug in the Pre-Cat O2 Sensors. Remember to plug everything in. One benefit of the N52 over the N54...look at how clean those intake valves are after 150k kms Done (Have a beer) Last edited by Jagaer; 06-01-2018 at 07:05 AM..
	Appreciate 0 Quote

06-01-2018, 08:47 AM	#62
vilord Major 497 Rep 1,316 Posts Drives: E91, Tundra, TT, SV650 Join Date: Apr 2013 Location: boston iTrader: (1) Garage List 2019 Tundra TRD SR5 [0.00] 2002 Audi TT Roadster [0.00] 2009 BMW 328i Wagon [0.00]	Congrats! Also yikes on the PCV heater short!
	Appreciate 0 Quote

08-20-2018, 03:22 PM	#63
bluewater328 Colonel 640 Rep 2,098 Posts Drives: 2011 bluewater 328i LCI sedan Join Date: Aug 2010 Location: Hawaii iTrader: (0)	For those of you who have done the 3-stage conversion, would a failure of some part (ie new DISA) of this be ODB code-readable or logical? Or if something hiccups with the engine, I'm guessing and this could be a logical guess? Or will it just (probably) pull a single code about "A" DISA failure?
	Appreciate 0 Quote

08-20-2018, 04:23 PM	#64
hassmaschine Major General 3985 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	there are codes for individual DISA flaps. That tells you if the DISA solenoid is working, but it doesn't tell you if the flap is broken etc.
	Appreciate 0 Quote

08-20-2018, 05:43 PM	#66
hassmaschine Major General 3985 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	Only after a reprogram - but beware. Some tuners don't necessarily enable those codes, so they would never trigger.
	Appreciate 1 bluewater328640.00 Quote