Brex White Angel Eyes Bulb for e90

poldim · 02-13-2006, 11:46 PM

Quote:

Originally Posted by yujini

As strange it may seem, this is the brex e90 kit.
Looks different than the e60 kit.

Wow, thats a very interesting design.
Do the E90 angel eye bulbs just point up?
Anyone have any pictures of this mount - bulb connection area?

yujini · 02-21-2006, 11:06 AM

Quote:

Originally Posted by poldim

Wow, thats a very interesting design.
Do the E90 angel eye bulbs just point up?
Anyone have any pictures of this mount - bulb connection area?

The bulbs don't point up, but it shoots it to the fiber cable or whatever cable it is, and the light follows the cable to the angel eyes.

Anyways, I just got more pictures of the ring and the people who installed them say it's bright but the pics don't show it.

poldim · 02-22-2006, 02:40 AM

Doesnt look bad. I'll look into it when I get my HID's, hopefully do some recon for a DIY LED write up...

yujini · 02-22-2006, 04:29 AM

yeah, I'm waiting on my 6000K D1S bulbs and when those come I'll be installing these

JamieA · 02-22-2006, 08:40 AM

Lurverly....

poldim · 02-22-2006, 10:49 AM

Some research has found these:

http://shop.store.yahoo.com/ledsupply/io.html

These are 8 bucks on the site and available in 35 and 70 degree light output angles.

Current problem is looks like these guys get pretty hot.

Quote:

http://www.techbits.com.au/webshop/c...ategory_id=283
The Io Moon LED Light Module consists of a printed circuit board, containing the Nichia Jupiter™ LED, bonded to an aluminum plate using a proprietry thermal management technique.

The Io Moon LED Light Module is 1.00" square and has two mounting holes for standard #4 screws. Electrical isolation allows the Io Moon to be mounted directly to a heat-sink surface.

The Io will operate safely in free air (all surfaces exposed to air) at the recommended operating current of 350mA. For operation at higher currents, the module should be attached to additional heat sinking.

The Io Moon is available in cool and warm white, and with primary optics producing 35° and 70° beam widths.

The Moon board above uses the Jupiter LED used in this flashlight:
http://www.j2ledflashlight.com/Auror...iaJupiter.html

Looks pretty powerful.

longtran · 02-22-2006, 11:13 AM

Quote:

Originally Posted by poldim

Some research has found these:

http://shop.store.yahoo.com/ledsupply/io.html

These are 8 bucks on the site and available in 35 and 70 degree light output angles.

Current problem is looks like these guys get pretty hot.

The Moon board above uses the Jupiter LED used in this flashlight:
http://www.j2ledflashlight.com/Auror...iaJupiter.html

Looks pretty powerful.

what does that led chip? do ??

poldim · 02-22-2006, 11:50 AM

Its not a chip, its just a mount. If you look at the quoted part, you'll see it mentions as a 1" x 1" base for the LED.

yujini · 02-27-2006, 08:53 AM

another update on the Brex white ring.

Additional pics of the white ring (most e60 brex/piaa angel eye kits are dark, and the manufacturers exaggerate the pics as being bright, but for e90 there's quite a lot of pics online which proves them to be as bright as OEM)

this time with 6200K PIAA lights. these things cost 70k yen! that's like almost 700 bux. crazy stuff.

G8Btech · 02-27-2006, 09:26 AM

can't help notice the front apron ... but are those the oem cf apron painted in white?

joony79 · 02-27-2006, 10:27 AM

This post is getting really interesting for me because I want the BREX white angeleyes AND the front lip spoiler on the picture above. Lemme know yujini~ ^^ 좋은 thread 감사합니다 ^^

Ed_330i · 02-27-2006, 11:10 AM

thats hott

yujini · 02-27-2006, 05:58 PM

Quote:

Originally Posted by G8Btech

can't help notice the front apron ... but are those the oem cf apron painted in white?

Those are ARQRAY front lips.

younghov85 · 02-27-2006, 06:10 PM

I am not sure if someone already asked this but it you have the non-xenon headlights, can you purchase the whole xenon headlights from this website? If so how much

G8Btech · 02-27-2006, 08:02 PM

Quote:

Originally Posted by yujini

Those are ARQRAY front lips.

Do you have the site for those front lips?

nine4surfah · 02-27-2006, 10:42 PM

I know this is off topic....sory to hi-jack the thread momentarily

Quote:

Originally Posted by G8Btech

Do you have the site for those front lips?

Hey pare! here's a link....arqray. Click on the "aero" link then click on "products for e90" and you'll see the pics. They look very similar to BMW's carbon fiber splitters.

both images are arqray lips.

OEM Carbon fiber lip

yujini · 02-27-2006, 11:44 PM

Quote:

Originally Posted by younghov85

I am not sure if someone already asked this but it you have the non-xenon headlights, can you purchase the whole xenon headlights from this website? If so how much

You can't purchase the whole xenon headlights from the website,
but I know you can purchase them on ebay shipped from europe for about 1500 bux.

The Arqray front lip look very different than the OEM CF lips in person.
IMO i prefer the arqray.

8krline · 02-28-2006, 02:53 AM

how do you order those angel eyes over here from NA? is there a dealer over here..

poldim · 03-01-2006, 06:41 PM

Quote:

Originally Posted by poldim

Some research has found these:

http://shop.store.yahoo.com/ledsupply/io.html

These are 8 bucks on the site and available in 35 and 70 degree light output angles.

Current problem is looks like these guys get pretty hot.

The Moon board above uses the Jupiter LED used in this flashlight:
http://www.j2ledflashlight.com/Auror...iaJupiter.html

Looks pretty powerful.

Anyone know a lot about electronics to confirm / deny any of my previous thoughts?

yujini · 03-03-2006, 02:29 AM

I just received the brex white ring kit and OSRAM 6000k D1S bulbs.
It sucks that I can't just install them right away.

brex white ring + OSRAM 6000k D1S bulbs = $550 (shipping, import tax and all). Crazy stuff, but I really wanted to do it.

Yesterday when i was at a restaurant the vallet parking guy parked my car on the road for a moment and another car hit my car. Now I need to replace my bumper and the left light got broken, so I have to wait almost a week to get them replaced.

My Kerscher bumper kit (bumper, HID, carbon spoiler) is coming next week as well, so if I only needed to replace my bumper, I wouldn't have cared at all. But now I have to wait a damn week since the service center doesn't have any xenon lights in stock.

I might just install the white ring and OSRAM bulbs just to see how it looks like. I'll keep you guys posted.

poldim · 03-03-2006, 09:48 PM

Quote:

Originally Posted by yujini

I just received the brex white ring kit and OSRAM 6000k D1S bulbs.
It sucks that I can't just install them right away.

brex white ring + OSRAM 6000k D1S bulbs = $550 (shipping, import tax and all). Crazy stuff, but I really wanted to do it.

Yesterday when i was at a restaurant the vallet parking guy parked my car on the road for a moment and another car hit my car. Now I need to replace my bumper and the left light got broken, so I have to wait almost a week to get them replaced.

My Kerscher bumper kit (bumper, HID, carbon spoiler) is coming next week as well, so if I only needed to replace my bumper, I wouldn't have cared at all. But now I have to wait a damn week since the service center doesn't have any xenon lights in stock.

I might just install the white ring and OSRAM bulbs just to see how it looks like. I'll keep you guys posted.

How bad is your Xenon messed up?
Can you get it from the shop and send it to me?

I want to see if I can come up with a less expensive alternative to the Brex kit.

yujini · 03-04-2006, 09:12 AM

Quote:

Originally Posted by poldim

How bad is your Xenon messed up?
Can you get it from the shop and send it to me?

I want to see if I can come up with a less expensive alternative to the Brex kit.

sending it meaning sending you a brex kit?

02-22-2006, 02:40 AM	#47
poldim Vroom Vrrooooom 309 Rep 3,146 Posts Drives: 330i Join Date: Oct 2005 Location: Bay Area, CA iTrader: (2) Garage List 2006 330i Sedan [0.00] 2003 GSX-R 600 [0.00]	Doesnt look bad. I'll look into it when I get my HID's, hopefully do some recon for a DIY LED write up... __________________ -Dmitriy 06' BMW 330i & 03' Suzuki GSX-R600 SG \| Beige Dakota \| Poplar \|\| iDrive w/MP3 \| PP \| SP \| CWP \| PDC \| Comfort \| Shades \|\| 40% Tint \| Black Line Tail Lights \| Hardwired V1
	Appreciate 0 Quote

02-22-2006, 04:29 AM	#48
yujini First Lieutenant 57 Rep 326 Posts Drives: G05 X5 30d, Boxster GTS (981) Join Date: Sep 2005 Location: Seoul, Korea / Cupertino, CA iTrader: (0) Garage List 2015 Porsche Boxste ... [0.00] 2019 BMW G05 X5 30d [0.00]	yeah, I'm waiting on my 6000K D1S bulbs and when those come I'll be installing these
	Appreciate 0 Quote

02-22-2006, 08:40 AM	#49
JamieA Colonel 93 Rep 2,168 Posts Drives: G01 X3 M40i Join Date: Sep 2005 Location: Adelaide, Australia iTrader: (0)	Lurverly.... __________________ '05 E90 325i \| '06 E90 325i \| '08 E90 325i LCI \| '13 F30 328i M-Sport \| '14 F10 535d M-Sport Current: '19 G01 X3 M40i
	Appreciate 0 Quote

02-22-2006, 11:50 AM	#52
poldim Vroom Vrrooooom 309 Rep 3,146 Posts Drives: 330i Join Date: Oct 2005 Location: Bay Area, CA iTrader: (2) Garage List 2006 330i Sedan [0.00] 2003 GSX-R 600 [0.00]	Its not a chip, its just a mount. If you look at the quoted part, you'll see it mentions as a 1" x 1" base for the LED. __________________ -Dmitriy 06' BMW 330i & 03' Suzuki GSX-R600 SG \| Beige Dakota \| Poplar \|\| iDrive w/MP3 \| PP \| SP \| CWP \| PDC \| Comfort \| Shades \|\| 40% Tint \| Black Line Tail Lights \| Hardwired V1
	Appreciate 0 Quote

02-27-2006, 08:53 AM	#53
yujini First Lieutenant 57 Rep 326 Posts Drives: G05 X5 30d, Boxster GTS (981) Join Date: Sep 2005 Location: Seoul, Korea / Cupertino, CA iTrader: (0) Garage List 2015 Porsche Boxste ... [0.00] 2019 BMW G05 X5 30d [0.00]	another update on the Brex white ring. Additional pics of the white ring (most e60 brex/piaa angel eye kits are dark, and the manufacturers exaggerate the pics as being bright, but for e90 there's quite a lot of pics online which proves them to be as bright as OEM) this time with 6200K PIAA lights. these things cost 70k yen! that's like almost 700 bux. crazy stuff.
	Appreciate 0 Quote

02-27-2006, 09:26 AM	#54
G8Btech Lieutenant 23 Rep 498 Posts Drives: E90 325i Join Date: Feb 2006 Location: Metro Manila iTrader: (0) Garage List 2006 E90 320i Execu ... [0.00] 2006 E90 320i Execu ... [0.00]	can't help notice the front apron ... but are those the oem cf apron painted in white? Attached Images
	Appreciate 0 Quote

02-27-2006, 10:27 AM	#55
joony79 mOOnarchy 22 Rep 329 Posts Drives: 330i SG Join Date: Oct 2005 Location: NJ Newport iTrader: (0) Garage List 2006 330I [0.00]	This post is getting really interesting for me because I want the BREX white angeleyes AND the front lip spoiler on the picture above. Lemme know yujini~ ^^ 좋은 thread 감사합니다 ^^
	Appreciate 0 Quote

02-27-2006, 06:10 PM	#58
younghov85 Captain 68 Rep 889 Posts Drives: 2006 E90 black 325 Join Date: Aug 2005 Location: Lanham, Maryland iTrader: (0)	I am not sure if someone already asked this but it you have the non-xenon headlights, can you purchase the whole xenon headlights from this website? If so how much
	Appreciate 0 Quote

02-28-2006, 02:53 AM	#62
8krline Second Lieutenant 21 Rep 277 Posts Drives: e90 330i metallic black Join Date: Feb 2006 Location: canada iTrader: (7)	how do you order those angel eyes over here from NA? is there a dealer over here..
	Appreciate 0 Quote

03-03-2006, 02:29 AM	#64
yujini First Lieutenant 57 Rep 326 Posts Drives: G05 X5 30d, Boxster GTS (981) Join Date: Sep 2005 Location: Seoul, Korea / Cupertino, CA iTrader: (0) Garage List 2015 Porsche Boxste ... [0.00] 2019 BMW G05 X5 30d [0.00]	I just received the brex white ring kit and OSRAM 6000k D1S bulbs. It sucks that I can't just install them right away. brex white ring + OSRAM 6000k D1S bulbs = $550 (shipping, import tax and all). Crazy stuff, but I really wanted to do it. Yesterday when i was at a restaurant the vallet parking guy parked my car on the road for a moment and another car hit my car. Now I need to replace my bumper and the left light got broken, so I have to wait almost a week to get them replaced. My Kerscher bumper kit (bumper, HID, carbon spoiler) is coming next week as well, so if I only needed to replace my bumper, I wouldn't have cared at all. But now I have to wait a damn week since the service center doesn't have any xenon lights in stock. I might just install the white ring and OSRAM bulbs just to see how it looks like. I'll keep you guys posted.
	Appreciate 0 Quote