[ansonmark]

Originally Posted by 335inYEG

Link is dead, can you pm me or post an active one please and thank you!

Yes please, would be very much appreciated!

[///3dkn]

Link is dead.. need new link! thank you

[lnxguy]

Originally Posted by Jewel's335i

im running into a problem.. when I try to select the NFS default folder EC-APPS that I downloaded, bmw coding tools program says its an invalid NFC folder??? what do I do??? this is the last step I need for this to work and ive tried downloading it 3 different times and selecting it and the same error message comes up. any help???

Create SGDAT and DATA folders under NFS and you won't get those errors anymore.

[Drifter2090]

Link is dead can someone please post an updated one! thanks!

[DJMOJO]

Bumping for new link too... Long shot at this point i guess but still worth bumping

[GQBlue]

Bump to read later

[Tim603]

Original Link can be found on WildCatCrazy's post here

http://www.e90post.com/forums/showthread.php?t=1204192

[Tim603]

Just successfully coded for my first time, this guide and the link to the other peoples guides worked perfect. Thanks man!

[JustDriveIt]

Originally Posted by DJMOJO

Bumping for new link too... Long shot at this point i guess but still worth bumping

Everything should be up to date and working now. Here is Wildcatcrazy's post with the mediafire link (it has been edited and updated in original post as well).

http://www.e90post.com/forums/showthread.php?t=1204192

[Rlequerica]

Good evening:
May I please receive a private message if anybody has any objection for me to write a question and include pictures here?

I have a 328i E90 N52 2009 and need help.
Thank you.
By the way how could I downsize my picture size in iPhone?

[Beemer721]

Is there any guy can code my 2010 328i coupe?
I called one and tried to delete my amber light and roll up window with the key fob but failed. Please help. I live in San Gabriel valley.

[blau iii]

I have a 2008 non-idrive 335i. All I want is the autofold mirrors when locking. Is there an easy, step by step way to do this without bricking my car?

[Joe@TopGearSolutions]

Here's the link to my software set up, and the DIY instructions are posted in this sub-forum's stickies.

http://www.e90post.com/forums/showthread.php?t=1204192

[JonEQuest]

I am wondering how to set software for a certain com parameter. My laptop has 4 USB ports and I am not sure if I cannot connect because of which one I am using. I know USB shouldn't matter but just curious. I am just trying to test a good OBD2 cable I already have that I got for my Toyota Tundra. It works great with the Techstream dealer software.

[Joe@TopGearSolutions]

Originally Posted by JonEQuest

I am wondering how to set software for a certain com parameter. My laptop has 4 USB ports and I am not sure if I cannot connect because of which one I am using. I know USB shouldn't matter but just curious. I am just trying to test a good OBD2 cable I already have that I got for my Toyota Tundra. It works great with the Techstream dealer software.

That cable won't work with BMW. It has to be a KDCAN cable (INPA/EDIABAS compatible).

USB to OBD cables are build differently and support different protocols.

[GnomeChild]

Tagging for when I need to code out my E-Diff

[TophDogg]

Havent coded yet but when I open up NCS the top "file" bar is in a different language. Correct profile is there though. Will this hinder me?

[ctuna]

Yes its in German but the guides should be enough
to get you through. And a lot of the words are close
to the English equivalent.

The steps to code aren't that difficult.
It is a good idea to understand the difference between.
Coding , programming and updating.
Coding = change setting in and individual module.
programming = adding or replacing a module in the car and
adding it to the master list called the VO which is stored in the CAS and FRM.
Updating = updating the firmware in a particular module in the car with winkfp.
or updating the whole car with Ista P .
VO or default programing = getting the values stored in the VO to load in to
a specified module rather than from a stored file.(Man file)

[TophDogg]

Yep I am thankful that there are loads of videos showing the steps. What use would programming a module have? Would I be able to add alarm functions if my vehicle is not alarm equipped? Basically if I just wanted the chirp for lock and unlock.

[ctuna]

A BMW alarm requires the alarm hardware and wiring.
Then it requires the coding to tell the car it's installed
and the setting up of what variables are possible.

There is a list of standard things you can do usually be
by just turning stuff from nicht acktiv to acktiv.

https://www.e90post.com/forums/attac...6&d=1487375332

The one I like is windows up with keyfob pretty useful .

[Savage_Doze]

I'm new to the coding so apology in advance if it was already asked. I haven't found a solution on any other threads.
Anyone can give an advice what I am doing wrong to connect to obd? I have all the tools installed on a Windows10 laptop with K+DCAN cable with COM1.
There is a led on obd connector of the cable that turn off after a minute or two even though ignition is on.
INPA shows both dots on - battery and ignition confirming the connection is made.

Problem is that FStool, FSC, Ncsexpert, etc, none of them able to connect. All tools load up without any error... its just they wont connect.

What am I missing?

[sdbmwcoding]

Originally Posted by Savage_Doze

I'm new to the coding so apology in advance if it was already asked. I haven't found a solution on any other threads.
Anyone can give an advice what I am doing wrong to connect to obd? I have all the tools installed on a Windows10 laptop with K+DCAN cable with COM1.
There is a led on obd connector of the cable that turn off after a minute or two even though ignition is on.
INPA shows both dots on - battery and ignition confirming the connection is made.

Problem is that FStool, FSC, Ncsexpert, etc, none of them able to connect. All tools load up without any error... its just they wont connect.

What am I missing?

Latency timer 1 as well for cable?