not liking the new alignment

Will_460cs · 05-14-2017, 12:30 AM

Quote:

Originally Posted by justpete

That's about 0.2" total toe out, am I reading this right or is it really 15' total. Seems a bit high but whatever works.

2mm ish from front to back face of wheel, it just that toe out is an unusual preference..

justpete · 05-14-2017, 12:32 AM

Quote:

Originally Posted by Will_460cs

2mm ish from front to back face of wheel, it just that toe out is an unusual preference..

Yeah, I was using 24" for the sin(0.25*) hypotenuse, close enough. I run about half that toe out at ~1/16" total.

juld0zer · 05-14-2017, 08:58 AM

I just had another look at the print out, i think in my mind i was aiming for -15'. I ended up with only -10', so -0.15" total front toe out. Pretty happy with it so i might just keep an eye on tyre wear. Tyre noise when braking is loud and only some surfaces will roar when I'm just cruising. I get bored of tyres when they are half worn anyway so i might look at more economical options next time round. PSS here are about 50% dearer than a PZero for example

05-14-2017, 08:58 AM	#47
juld0zer Lieutenant Colonel 480 Rep 1,600 Posts Drives: Prev 135i 7DCT, Now 130i 6sp Join Date: Jul 2016 Location: 2153 iTrader: (0)	I just had another look at the print out, i think in my mind i was aiming for -15'. I ended up with only -10', so -0.15" total front toe out. Pretty happy with it so i might just keep an eye on tyre wear. Tyre noise when braking is loud and only some surfaces will roar when I'm just cruising. I get bored of tyres when they are half worn anyway so i might look at more economical options next time round. PSS here are about 50% dearer than a PZero for example
	Appreciate 0 Quote