In-car camera mount project.

adc · 04-25-2007, 04:39 PM

If you're looking for a more interesting solution, check this link:
http://www.racerpartswholesale.com/speedprod14.htm

Headrest:
http://www.racerpartswholesale.com/speedprod15.htm
The dual headrest solution should take care of any concerns about vibration deflection or accident deflection.

Suction mounts:
http://www.racerpartswholesale.com/speedprod15b.htm

KL2DC · 04-25-2007, 05:20 PM

Damn Josh...that looks awesome!

txusa03 · 04-26-2007, 11:06 AM

cool. How about rounding the edges and corner so it is not sharp or pointy incase it comes flying at ya (for safety of course since you never know).

Ok, the real question that no one is asking is how much you going to sell this kit for? I know you not spending all this energy just to make one...might as well sell it for those interested. Only issues with mass production is how would it fit all cameras?

gl

ksfrogman · 04-26-2007, 11:09 AM

Some of the videos I took were done with the videocam mounted between the rear headrest and rear seat. The problem with this is that the camera focuses on the car's interior, and adjusts lighting accordingly. Everything outside the car comes out too bright and out of focus.

The best set up I have seen mounts on the front seat headrest mounts.

Josh49 · 04-26-2007, 11:17 AM

Quote:

Originally Posted by txusa03

cool. How about rounding the edges and corner so it is not sharp or pointy incase it comes flying at ya (for safety of course since you never know).

Ok, the real question that no one is asking is how much you going to sell this kit for? I know you not spending all this energy just to make one...might as well sell it for those interested. Only issues with mass production is how would it fit all cameras?

gl

Yep. All corners will be rounded..

Just making this one, for myself. It is designed specifically to my camera and car... If I buy a new car, I can replace the rectangular piece. If I buy a new camera I can make a new camera mount plate.. And about me not spending all this energy just to make one.. I am..

Josh49 · 04-26-2007, 03:06 PM

Quote:

Originally Posted by ksfrogman

Some of the videos I took were done with the videocam mounted between the rear headrest and rear seat. The problem with this is that the camera focuses on the car's interior, and adjusts lighting accordingly. Everything outside the car comes out too bright and out of focus.

The best set up I have seen mounts on the front seat headrest mounts.

Thanks for the info..

shimshimhada · 05-04-2007, 03:18 PM

Quote:

Originally Posted by ksfrogman

Some of the videos I took were done with the videocam mounted between the rear headrest and rear seat. The problem with this is that the camera focuses on the car's interior, and adjusts lighting accordingly. Everything outside the car comes out too bright and out of focus.

The best set up I have seen mounts on the front seat headrest mounts.

All you have to do is manual focus and manual exposure, then it's fine no matter where you mount it. How did I miss this thread?

M5 at shenandoah, cam was upside down mounted from the sunroof glass using a chasecam stickymount (.3x semi-fisheye lens used):
http://video.google.com/videoplay?do...05111163&hl=en

330i at vir, cam was mounted right side up using an aluminum bar mount attached to the child safety things on the rear panel (no wide angle):
http://video.google.com/videoplay?do...81745619&hl=en

m3 at mid ohio, cam was mounted on rear glass, .3x wide angle used:
http://video.google.com/videoplay?do...31869669&hl=en

test at local road, same as m5 setup (memory mode which is wider):
http://video.google.com/videoplay?do...94568514&hl=en

KEVIN88GT · 05-04-2007, 04:58 PM

lol the last one with the fisheye lens is great...but why are you wearing garbage man gloves?

mjh93sa · 05-04-2007, 05:00 PM

A quick thought:

You could just make the mount with a standard thread for camera / tripod. Then you could use a standard tripod head to give you maximum adjustability.

shimshimhada · 05-13-2007, 07:22 PM

Quote:

Originally Posted by KEVIN88GT

lol the last one with the fisheye lens is great...but why are you wearing garbage man gloves?

Garbage men wear G-Force gloves?

KEVIN88GT · 05-13-2007, 08:22 PM

Sorry they looked like these from the video http://www.unexco.com/WorkGloves.jpg

why are they so long?

shimshimhada · 05-17-2007, 06:09 AM

Quote:

Originally Posted by KEVIN88GT

Sorry they looked like these from the video http://www.unexco.com/WorkGloves.jpg

why are they so long?

REAL driving gloves have long cuffs.

Josh49 · 06-20-2007, 03:56 PM

Turned in my prints to be cut.. Hopefully its complete before my driving school..

Josh49 · 06-20-2007, 03:59 PM

Some pics, will post pics of final product after machining as well:

Material:
Both blocks will be black Delrin, middle rod will be 6061 Aluminum.

Josh49 · 06-20-2007, 04:01 PM

Same degrees of freedom apply as in this earlier concept picture -

This can do +/- 25 degrees now though in that axis.

Josh49 · 06-20-2007, 04:02 PM

Can't wait to see this made..

Josh49 · 06-20-2007, 04:41 PM

Neoprene Vibration mounts constraining yaw of camera btw..

And RTV under camera and between headrest and mount to dampen vibration.

Josh49 · 07-05-2007, 03:12 PM

Update:
Camera mount 90% manufactured..

KEVIN88GT · 07-05-2007, 07:08 PM

who's manufacturing it for you....wow you are really making us wait for those pics huh

Josh49 · 07-05-2007, 07:25 PM

Quote:

Originally Posted by KEVIN88GT

who's manufacturing it for you....wow you are really making us wait for those pics huh

A machinist I know..

I bought the remaining hardware on mcmaster, should ship out today. Can't wait to have it all up and running..

ntpcrew13 · 07-12-2007, 03:17 PM

let us know asap and how much it will cost.

Josh49 · 07-12-2007, 03:19 PM

Quote:

Originally Posted by ntpcrew13

let us know asap and how much it will cost.

Tonight I will take some pictures of the entire setup in the car, and post them in the photo forum. As for how much it will cost, I just had this one made, I'm not mass producing these.. Josh

04-25-2007, 04:39 PM	#45
adc Major General 2793 Rep 6,791 Posts Drives: 2018 F80 M3 ED Join Date: Sep 2006 Location: MD/DC iTrader: (12)	If you're looking for a more interesting solution, check this link: http://www.racerpartswholesale.com/speedprod14.htm Headrest: http://www.racerpartswholesale.com/speedprod15.htm The dual headrest solution should take care of any concerns about vibration deflection or accident deflection. Suction mounts: http://www.racerpartswholesale.com/speedprod15b.htm
	Appreciate 0 Quote

04-25-2007, 05:20 PM	#46
KL2DC Moderator 325 Rep 17,767 Posts Drives: F36 428i,E90 328i, E85 Z4 3.0i Join Date: Jan 2006 Location: DC Metro iTrader: (23) Garage List 2015 F36 428i [0.00] 2011 E90 328i [0.00] 2006 E85 Z4 3.0i [0.00]	Damn Josh...that looks awesome! __________________ Official DC Metro Registry - Current, New & Prospective Area Members Roll Call!
	Appreciate 0 Quote

04-26-2007, 11:06 AM	#47
txusa03 Major General 568 Rep 6,563 Posts Drives: TS330iPPSP6MT Join Date: Jul 2005 Location: Planet Earth iTrader: (3)	cool. How about rounding the edges and corner so it is not sharp or pointy incase it comes flying at ya (for safety of course since you never know). Ok, the real question that no one is asking is how much you going to sell this kit for? I know you not spending all this energy just to make one...might as well sell it for those interested. Only issues with mass production is how would it fit all cameras? gl __________________ under construction!
	Appreciate 0 Quote

04-26-2007, 11:09 AM	#48
ksfrogman Major General 611 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	Some of the videos I took were done with the videocam mounted between the rear headrest and rear seat. The problem with this is that the camera focuses on the car's interior, and adjusts lighting accordingly. Everything outside the car comes out too bright and out of focus. The best set up I have seen mounts on the front seat headrest mounts. __________________
	Appreciate 0 Quote

05-04-2007, 04:58 PM	#52
KEVIN88GT Captain 85 Rep 793 Posts Drives: 06 Audi A4 Join Date: Jan 2007 Location: NYC iTrader: (0)	lol the last one with the fisheye lens is great...but why are you wearing garbage man gloves?
	Appreciate 0 Quote

05-04-2007, 05:00 PM	#53
mjh93sa Major General 148 Rep 5,080 Posts Drives: 530d Join Date: Dec 2005 Location: Gloucestershire iTrader: (0) Garage List 2012 BMW M135i [10.00] 2011 Mini Countryma ... [5.50]	A quick thought: You could just make the mount with a standard thread for camera / tripod. Then you could use a standard tripod head to give you maximum adjustability. __________________ Gone: Fiesta - Focus - E46 320dSE - E91 330dMSport - E82 135iMSport - R55 JCW Clubman - M135i Now: 530d
	Appreciate 0 Quote

05-13-2007, 08:22 PM	#55
KEVIN88GT Captain 85 Rep 793 Posts Drives: 06 Audi A4 Join Date: Jan 2007 Location: NYC iTrader: (0)	Sorry they looked like these from the video http://www.unexco.com/WorkGloves.jpg why are they so long? __________________ Now: '11 BMW X5 xDrive35i Then: '07 X3 3.0si '07 335xi '06 Audi A4 2.0T Quattro
	Appreciate 0 Quote

06-20-2007, 03:56 PM	#57
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Turned in my prints to be cut.. Hopefully its complete before my driving school.. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

06-20-2007, 03:59 PM	#58
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Some pics, will post pics of final product after machining as well: Material: Both blocks will be black Delrin, middle rod will be 6061 Aluminum. Attached Images __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

06-20-2007, 04:01 PM	#59
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Same degrees of freedom apply as in this earlier concept picture - This can do +/- 25 degrees now though in that axis. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

06-20-2007, 04:02 PM	#60
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Can't wait to see this made.. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

06-20-2007, 04:41 PM	#61
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Neoprene Vibration mounts constraining yaw of camera btw.. And RTV under camera and between headrest and mount to dampen vibration. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

07-05-2007, 03:12 PM	#62
Josh49 Major General 254 Rep 6,664 Posts Drives: E90 325xi Join Date: Jan 2006 Location: Boston, MA iTrader: (33)	Update: Camera mount 90% manufactured.. __________________ E90 325XI, MYSTIC BLUE ON BLACK/ALUM, STEP, NAV, PDC, CWP, XENON, SIRIUS, ALARM, MUD GUARDS, CLEARBRA, CHROME GRILLS AND TIPS, VALENTINE 1 (HARDWIRED), HO CERAMIC 40%, 161'S, REAR FOG MOD, LUX 4.0, BLACKLINES, OEM PEDALS, MTEC FOGS, GRUPPE-M REP INTAKE. 156'S AND RUBBER MATS FOR THE WINTER.
	Appreciate 0 Quote

07-05-2007, 07:08 PM	#63
KEVIN88GT Captain 85 Rep 793 Posts Drives: 06 Audi A4 Join Date: Jan 2007 Location: NYC iTrader: (0)	who's manufacturing it for you....wow you are really making us wait for those pics huh __________________ Now: '11 BMW X5 xDrive35i Then: '07 X3 3.0si '07 335xi '06 Audi A4 2.0T Quattro
	Appreciate 0 Quote

07-12-2007, 03:17 PM	#65
ntpcrew13 Lieutenant Colonel 114 Rep 1,599 Posts Drives: Arctic e90 330i Join Date: Apr 2005 Location: chicago,il (mokena) iTrader: (29) Garage List 06 pre sept model e ... [10.00] 2007 e61 [0.00] 2003 e53 [0.00] my winter ride [0.00] e90post chicago sub ... [0.00] e90post chicago mee ... [0.00]	let us know asap and how much it will cost. __________________ ......support your local vendors. view my garage for a list of mods.
	Appreciate 0 Quote