NCS Expert - need to edit profile?

wildcatcrazy · 11-09-2015, 11:12 PM

Quote:

Originally Posted by xradman

Could I get profiles to edit in NCS Expert 4.0.1 for my 2011 E92? Thank you in advance.

Pm me your email.

Whathedunks · 11-16-2015, 10:35 AM

Could someone please help me get the ncs-expert profiles for my 09 e92?
I am running version 4.0.1
Thanks in advance!

wildcatcrazy · 11-16-2015, 09:20 PM

Quote:

Originally Posted by Whathedunks

Could someone please help me get the ncs-expert profiles for my 09 e92?
I am running version 4.0.1
Thanks in advance!

Pm me your email and if you're using 32 or 64 bit.

ninja_zx11 · 01-27-2016, 07:29 PM

Hi, I need some help in understanding ncsexpert profiles.From what i read that basically we need only 3 types of profiles.
1.Profile to just read the parameters from the module.(generating .TRC file)
2.Profile to write back .man file.( after manipulating .trc file)
3.Profile to write default values to the module according to vehicle's VO.
Am i right?
If yes then could anybody please send me profiles to accomplish above said tasks on ncsexpert 4.0.1?
Also what is the password to edit profiles in 4.0.1?repxet is not working on 4.0.1. Thanks in advance.

LMB335IS · 01-27-2016, 08:29 PM

Quote:

Originally Posted by ninja_zx11

Hi, I need some help in understanding ncsexpert profiles.From what i read that basically we need only 3 types of profiles.
1.Profile to just read the parameters from the module.(generating .TRC file)
2.Profile to write back .man file.( after manipulating .trc file)
3.Profile to write default values to the module according to vehicle's VO.
Am i right?
If yes then could anybody please send me profiles to accomplish above said tasks on ncsexpert 4.0.1?
Also what is the password to edit profiles in 4.0.1?repxet is not working on 4.0.1. Thanks in advance.

You need a Expertmode (or whatever you want to call it) and a Write profile. Both will read the modules. Expertmode will do the default and the Write profile will do the coding manipulation. You can make your own profiles and call them whatever you want. Read this guide starting about halfway down. It tells you how to set up your own profiles. http://codinge90.com/getting-started/ I can send you a zip of 4.0.1 profiles, no password needed.

ninja_zx11 · 01-27-2016, 11:47 PM

Quote:

Originally Posted by LMB335IS

You need a Expertmode (or whatever you want to call it) and a Write profile. Both will read the modules. Expertmode will do the default and the Write profile will do the coding manipulation. You can make your own profiles and call them whatever you want. Read this guide starting about halfway down. It tells you how to set up your own profiles. http://codinge90.com/getting-started/ I can send you a zip of 4.0.1 profiles, no password needed.

Thanks for the info!!Just sent you my email via PM.Thanks again.

ninja_zx11 · 01-28-2016, 04:27 PM

Thanks LMB335IS for the files!!
I tried to edit "EXPERT MAN" and "Revtor's NCS Expert Profile" just to find the difference and the only difference i found is in SGET-DATA.In revtor's all options are ticked but in EXPERT MAN ,all are ticked except "enter SGET data".I think both "EXPERT MAN" and "Revtor's NCS Expert Profile can be used to write back the .MAN file to the module.
My question is what does "enter SGET data" means and why its not ticked in EXPERT MAN profile even thou people are using it to write .MAN file.Thanks.

pak1s0ul · 02-04-2016, 02:01 AM

hello Im running ncs expert 3.1.0 i got it when i purchased the cable, i have 2011 e93 M3 would like to code it and would really appreciate if you can send me the latest ncs expert and profiles. thanks !

Mdriv3r · 08-20-2016, 10:12 PM

Quote:

Originally Posted by ******84

It is too old. I will PM you with new software.

Could you pm me a new cop of NCS Expert? I am using 3.1.0 as well.

Drifter2090 · 08-24-2016, 10:26 AM

Can I get the profiles too, I only have the 2 default ones, I have just been using expert-mode, I didn't know there were different profiles.

Thanks

the dope steez · 08-25-2016, 09:05 PM

Small problem, I am setting up my NCS Expert profile according to the instructions here (http://codinge90.com/getting-started/#S5) and I have no file in my WORK folder entitled FSW_PSW.MAN, so I can get all the way to step 18, but when I hit the 'back' button I get an error saying FSW_PSW.MAN could not be opened for reading...
Feel like I'm almost there! Any help is appreciated

EDIT: Figured it out - just need to make a copy of the TRC file and rename it to .MAN... Coded digital speedo then battery died... Whoops.

Mwahab · 02-17-2017, 10:37 AM

Guys would somebody explain to me what profiles from the default list i got from NCS Expert 4.0.1
Default
Car&Key Memory
Expertenmodus (offfen)
Expertenmodus (Werksienxxx)
Fisterprofile
SG Codieren mit xxxxxx

Aus335iguy · 02-17-2017, 06:26 PM

Quote:

Originally Posted by LMB335IS

Quote:

Originally Posted by ninja_zx11

Hi, I need some help in understanding ncsexpert profiles.From what i read that basically we need only 3 types of profiles.
1.Profile to just read the parameters from the module.(generating .TRC file)
2.Profile to write back .man file.( after manipulating .trc file)
3.Profile to write default values to the module according to vehicle's VO.
Am i right?
If yes then could anybody please send me profiles to accomplish above said tasks on ncsexpert 4.0.1?
Also what is the password to edit profiles in 4.0.1?repxet is not working on 4.0.1. Thanks in advance.

You need a Expertmode (or whatever you want to call it) and a Write profile. Both will read the modules. Expertmode will do the default and the Write profile will do the coding manipulation. You can make your own profiles and call them whatever you want. Read this guide starting about halfway down. It tells you how to set up your own profiles. http://codinge90.com/getting-started/ I can send you a zip of 4.0.1 profiles, no password needed.

I think you can do this..

Showoff · 05-04-2017, 10:38 AM

Hi All,

I upgraded the rear lights on my wife's E70 X5 to the newer facelift version (big improvement!) and tried to get rid of the two stage light error using NCS Expert, but have run into what I believe is a common problem.

Opened NCS Expert and tried to load the expertmode profile and got the following error: NCS expert "profil version 2.0 ungültig"...

I've searched the web and believe I need to update my profile to version 3.0 or 4.0.
I found a link to the newer profiles on here, but now it seems the zip folder is invalid or corrupted?

Can anyone point me in the right direction, or send me a new 3.0 profile as lots of searching for the last few weeks has not helped..

I'm also hoping that when I can get the coding to update "+MUEH to FA in CAS and FRM modules" it will also allow the rear fog light to work again, if not I may need some help with that as well.

Running NCS Expert 4.0.1
Old laptop with Windows XP

Thanks in advance.

Aus335iguy · 05-04-2017, 04:27 PM

Quote:

Originally Posted by Showoff

Hi All,

I upgraded the rear lights on my wife's E70 X5 to the newer facelift version (big improvement!) and tried to get rid of the two stage light error using NCS Expert, but have run into what I believe is a common problem.

Opened NCS Expert and tried to load the expertmode profile and got the following error: NCS expert "profil version 2.0 ungültig"...

I've searched the web and believe I need to update my profile to version 3.0 or 4.0.
I found a link to the newer profiles on here, but now it seems the zip folder is invalid or corrupted?

Can anyone point me in the right direction, or send me a new 3.0 profile as lots of searching for the last few weeks has not helped..

I'm also hoping that when I can get the coding to update "+MUEH to FA in CAS and FRM modules" it will also allow the rear fog light to work again, if not I may need some help with that as well.

Running NCS Expert 4.0.1
Old laptop with Windows XP

Thanks in advance.

Are you using a write profile as per above ?

Showoff · 05-04-2017, 07:51 PM

Quote:

Originally Posted by Aus335iguy

Are you using a write profile as per above ?

I was using the expert mode profile which I believe is a write profile?

Aus335iguy · 05-04-2017, 07:52 PM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by Aus335iguy

Are you using a write profile as per above ?

I was using the expert mode profile which I believe is a write profile?

Nope you need another profile as per above

Showoff · 05-05-2017, 03:21 AM

Quote:

Originally Posted by Aus335iguy

Nope you need another profile as per above

Really? So these instructions are wrong then:
http://www.e90post.com/forums/attach...2&d=1312021107

Aus335iguy · 05-05-2017, 07:04 AM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by Aus335iguy

Nope you need another profile as per above

Really? So these instructions are wrong then:
http://www.e90post.com/forums/attach...2&d=1312021107

You need a write profile. Have you created one?

Showoff · 05-05-2017, 08:39 AM

Quote:

Originally Posted by Aus335iguy

You need a write profile. Have you created one?

I guess not then?
The only instructions I can find to create one are for the old version. Are there instructions for Creating a new write profile in NCS Expert v4.0.1?

Aus335iguy · 05-05-2017, 04:06 PM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by Aus335iguy

You need a write profile. Have you created one?

I guess not then?
The only instructions I can find to create one are for the old version. Are there instructions for Creating a new write profile in NCS Expert v4.0.1?

The instructions should be the same

Showoff · 05-05-2017, 07:36 PM

Quote:

Originally Posted by Aus335iguy

The instructions should be the same

Thanks for your help.. The problem is that the instructions tell you to:

Click File, and then click on Load Profil.
Choose the Expertmode profile and then click the OK button.

If I do this I get the error "profil version 2.0 ungültig"

Even if this did work I've read that when you try and click on Edit Profil and enter the Password "repxet" it doesn't work on version 4.0.1.

Everything I've read suggests I can change the VO using Expertmode, I just need a 3.0 profile rather than a 2.0...

11-16-2015, 10:35 AM	#46
Whathedunks Second Lieutenant 23 Rep 294 Posts Drives: 335i Join Date: Sep 2009 Location: South iTrader: (2)	Could someone please help me get the ncs-expert profiles for my 09 e92? I am running version 4.0.1 Thanks in advance!
	Appreciate 0 Quote

01-27-2016, 07:29 PM	#48
ninja_zx11 Private First Class 93 Rep 183 Posts Drives: X5 diesel 2009 Join Date: Jan 2014 Location: Langley BC,Canada iTrader: (0)	Hi, I need some help in understanding ncsexpert profiles.From what i read that basically we need only 3 types of profiles. 1.Profile to just read the parameters from the module.(generating .TRC file) 2.Profile to write back .man file.( after manipulating .trc file) 3.Profile to write default values to the module according to vehicle's VO. Am i right? If yes then could anybody please send me profiles to accomplish above said tasks on ncsexpert 4.0.1? Also what is the password to edit profiles in 4.0.1?repxet is not working on 4.0.1. Thanks in advance.
	Appreciate 0 Quote

01-28-2016, 04:27 PM	#51
ninja_zx11 Private First Class 93 Rep 183 Posts Drives: X5 diesel 2009 Join Date: Jan 2014 Location: Langley BC,Canada iTrader: (0)	Thanks LMB335IS for the files!! I tried to edit "EXPERT MAN" and "Revtor's NCS Expert Profile" just to find the difference and the only difference i found is in SGET-DATA.In revtor's all options are ticked but in EXPERT MAN ,all are ticked except "enter SGET data".I think both "EXPERT MAN" and "Revtor's NCS Expert Profile can be used to write back the .MAN file to the module. My question is what does "enter SGET data" means and why its not ticked in EXPERT MAN profile even thou people are using it to write .MAN file.Thanks.
	Appreciate 0 Quote

02-04-2016, 02:01 AM	#52
pak1s0ul Enlisted Member 6 Rep 45 Posts Drives: 2011 BMW M3 E93 Join Date: Feb 2015 Location: Brooklyn iTrader: (0)	hello Im running ncs expert 3.1.0 i got it when i purchased the cable, i have 2011 e93 M3 would like to code it and would really appreciate if you can send me the latest ncs expert and profiles. thanks !
	Appreciate 0 Quote

08-24-2016, 10:26 AM	#54
Drifter2090 Colonel 922 Rep 2,109 Posts Drives: E90 M3 \| E92 335i \| E90 335d Join Date: Jul 2015 Location: Ontario, Canada iTrader: (1)	Can I get the profiles too, I only have the 2 default ones, I have just been using expert-mode, I didn't know there were different profiles. Thanks __________________ MGM F82 M4 DCT / MPerformance / Swift / CSF / IND / Turner / BimmerWorld BSM F87 M2 6MT / Fabspeed / MPerformance / Turner / AutoID - SOLD JB-NB E92 M3 6MT / IND / RTD / Alpine / KW / ActiveAutowerke / 360Carbon - SOLD SS2-FR E90 M3 6MT / IND / AFE / ActiveAutowerke - SOLD AW-FR E90 M3 DCT / ACM / IND / AutoTecknic / K&N / H&R / Bilstein - SOLD
	Appreciate 0 Quote

08-25-2016, 09:05 PM	#55
the dope steez Captain 406 Rep 808 Posts Drives: F30 335i M-Sport Join Date: Jul 2016 Location: Shredmonton, Illberta iTrader: (0)	Small problem, I am setting up my NCS Expert profile according to the instructions here (http://codinge90.com/getting-started/#S5) and I have no file in my WORK folder entitled FSW_PSW.MAN, so I can get all the way to step 18, but when I hit the 'back' button I get an error saying FSW_PSW.MAN could not be opened for reading... Feel like I'm almost there! Any help is appreciated EDIT: Figured it out - just need to make a copy of the TRC file and rename it to .MAN... Coded digital speedo then battery died... Whoops. Last edited by the dope steez; 08-25-2016 at 10:16 PM..
	Appreciate 0 Quote

02-17-2017, 10:37 AM	#56
Mwahab Banned 60 Rep 193 Posts Drives: F30 Join Date: Dec 2016 Location: Cairo,Egypt iTrader: (0) Garage List 2015 BMW F30 [0.00]	Guys would somebody explain to me what profiles from the default list i got from NCS Expert 4.0.1 Default Car&Key Memory Expertenmodus (offfen) Expertenmodus (Werksienxxx) Fisterprofile SG Codieren mit xxxxxx Attached Images
	Appreciate 0 Quote

05-04-2017, 10:38 AM	#58
Showoff New Member 0 Rep 11 Posts Drives: BMW 335d M-Sport Coupe Join Date: Jul 2012 Location: Hampshire iTrader: (0)	Hi All, I upgraded the rear lights on my wife's E70 X5 to the newer facelift version (big improvement!) and tried to get rid of the two stage light error using NCS Expert, but have run into what I believe is a common problem. Opened NCS Expert and tried to load the expertmode profile and got the following error: NCS expert "profil version 2.0 ungültig"... I've searched the web and believe I need to update my profile to version 3.0 or 4.0. I found a link to the newer profiles on here, but now it seems the zip folder is invalid or corrupted? Can anyone point me in the right direction, or send me a new 3.0 profile as lots of searching for the last few weeks has not helped.. I'm also hoping that when I can get the coding to update "+MUEH to FA in CAS and FRM modules" it will also allow the rear fog light to work again, if not I may need some help with that as well. Running NCS Expert 4.0.1 Old laptop with Windows XP Thanks in advance.
	Appreciate 0 Quote