Quote:
Originally Posted by makkan00
Jump start your car. If your car starts, then fine.
If not, then you need somebody who has inpa to reset the codes. If the battery is low and you try to crank it few times with low battery, it put your car on protective mode.
12.06V does not look bad but you should take the readings of the battery when it is on the car and not when the battery is taken out of the car.
|
Had RAC come over to diagnose. They could start car fine via jump, removed battery and underneath the battery tray, water had eaten trough the battery cable that goes underneath, and that was somehow shorting.
I guess I will need to take it to someone to replace it!
