Msport Steering Wheel DIY

khuuster · 05-01-2009, 02:22 PM

thanks for the DIY, although removing the AIRBAG was a PITA!

g9sBMW · 05-01-2009, 03:05 PM

Quote:

Originally Posted by g9sBMW

Does anyone know if you can order this screw and grounding point?
I purchased MTech wheel used and it did not come with a screw or grounding pin to slide in harness connector.

anyone else have to fabricate one?

bump

cjgottschalk · 05-14-2009, 04:07 PM

This screw and wire should already be there in your old wheel...

kisho · 06-10-2009, 01:44 AM

Quote:

Originally Posted by Cay955

do you have an XI? For some reason it happens on XI models. To get rid of all the lights, start your engine and turn your wheel all the way to the left and then to the right or vice versa....

I'm getting the airbag light &I have an 325xi. I just now tried turning my wheel to the left &right, but results. I also disconnected the battery during installation. I installed a oem sport wheel with paddles, (waiting for my custom wheel link) the paddles &the down on the volume don't work. I'd love some help.

nitty90 · 06-12-2009, 12:09 PM

Hi there,newbie here.I wanna replace the standard steering with the M tech version. Anyone can advise how to remove the multifunction connectors on both sides? I tried to pull them off but they seem to be tight in position and there is no 'slots' to insert a watchmaker to pry out the connectors. Any kind soul can advise? Many thanks

Rogue_Marine · 06-20-2009, 08:38 PM

Thanks Bavarian19 for the great DIY! I just completed my swap to the M-Sport Perforated Steering Wheel and everything worked without a problem.

akack79 · 09-14-2009, 08:13 PM

Thanks for everyone that contributed to this DIY, a lot easier than I imagined!!

Kurfer · 09-14-2009, 09:11 PM

What a great DIY! Finished my install in about 1 hour, hardest part was getting the paddle shifters unplugged.

Now to sell my old wheel!

Thanks!

akack79 · 09-14-2009, 11:21 PM

Quote:

Originally Posted by Kurfer

What a great DIY! Finished my install in about 1 hour, hardest part was getting the paddle shifters unplugged.

Now to sell my old wheel!

Thanks!

Ya me too. I just pulled on it firmly straight out, thought I was gona break it!!

Yinger · 09-17-2009, 06:54 PM

Great write up! Followed the instructions exactly and took about 45 min for the install. Installed the M3 tri stitched which is installed exactly the same way.

Roleez · 09-18-2009, 04:53 AM

Props to the originator of this thread! Bought a CPO 330i in which the previous owner wore out the black color of the steering wheel to the bare SKIN! I'd expect that in a car with over 100K, but not 24K. Followed the DIY steps to install an M-tech wheel in less than an hour. Now it feels like I'm driving my M5 again!

klerk · 10-19-2009, 09:04 PM

new member here. m sport wheel will be the first thing i change to my new 335i. does anyone know the difference between the following wheel pn's:

32 307 906 846
32 307 839 114

i've seen both numbers referenced in different DIY's. TIA.

g9sBMW · 10-20-2009, 05:45 PM

getbmwparts says Part number 32307906846 was superceded by part number 32307839114.

klerk · 10-20-2009, 09:17 PM

does anyone know if there are any physical differences between the two wheels? i assume i should stick with the 114?

aquaanox · 10-28-2009, 01:50 AM

So i have done this mod successfully on my 328 e92 MT , and just picked up a 335 auto sedan with paddles today. The thing is, i dont really want the pedals, can i simply get a m wheel without paddles, and not put the paddles back in ? (vs having to buy one with the cutouts etc) will that work, anyone done this ?

iBeech · 10-28-2009, 05:09 AM

Quote:

Originally Posted by g9sBMW

Does anyone know if you can order this screw and grounding point?
I purchased MTech wheel used and it did not come with a screw or grounding pin to slide in harness connector.

anyone else have to fabricate one?

Bump,

I'm going from the standard wheel to the m-tech- so i dont think my old wheel has this screw. I've got the new connecting line cable- perhaps its in there.

Also, i've purchased a new airbag- does the airbag mounting bracket come with it?

Thanks

g9sBMW · 10-28-2009, 02:33 PM

If you're wheel doesnt have the screw and grounding point. Find a screw at hardware store and u can fabricate the grounding pin with a speaker terminal crimp on available radioshack, pepboys etc. good luck

aquaanox · 10-28-2009, 02:37 PM

Quote:

Originally Posted by aquaanox

So i have done this mod successfully on my 328 e92 MT , and just picked up a 335 auto sedan with paddles today. The thing is, i dont really want the pedals, can i simply get a m wheel without paddles, and not put the paddles back in ? (vs having to buy one with the cutouts etc) will that work, anyone done this ?

also, i assume the existing paddles can be used on the m wheel with cutouts ? tisher has separate part numbers for the paddles when you order the wheel. tia.

MounisM · 10-29-2009, 05:31 PM

Hi i replaced my steering wheel with a new steering wheel. I had a non sport 06 330xi. I did everything that was told. Now when i turned the car on. i get the 4x4 sign and also break sign in orange? i think they are the only 2 sign that are on?? any help i hope i told everything.

curtistealer · 10-31-2009, 01:19 AM

I have e90 2007 320cp

I've bought steering wheel, airbag module and coil spring cartridge..
1)Steering wheel w/ paddle shift (Part No. 32306777631)
2)Airbag module (Part No. 32306770515)
3)Coil spring cartridge (Part No. 61316989557)

I want these paddle working as OEM. So I took the 2 cable lines from gear box to fit in coil cartridge.

Picture below is coil cartridge and steering wheel cable.

I assume that red- marked green plug which came from the steering wheel has shift up/down signal.
but my coil cartridge doesn't have pins for that..Instead there's only two plastics..

should i buy another coil cartridge? or... what should i do?

catch · 11-11-2009, 03:56 PM

I jsut did this install in literally 15 min... great DIY here!
if it werent for this I woudl have brought it somewhere to get done.
Anyone looking to do this and is scared, dont worry, these instructions make it look harder then it actually is!

Kg810 · 11-12-2009, 01:06 PM

Hey, quick question here... So if I am going from non-sport steering wheel -> m-tech... do I still have to go through the steps of removing the airbag and stuff? Or is there anyway to just remove the whole non-sport steering wheel and put on my m-tech steering wheel? Thanks.

05-01-2009, 02:22 PM	#639
khuuster Hella Nor*Cal Vinyl 69 Rep 2,267 Posts Drives: 2015 M3 f80 Alpine White Join Date: Sep 2007 Location: San Jose iTrader: (5)	thanks for the DIY, although removing the AIRBAG was a PITA! __________________ jeffkhuu@gmail.com e92 VINYL trim KIT at LOW PRICE!
	Appreciate 0 Quote

05-14-2009, 04:07 PM	#641
cjgottschalk Registered 0 Rep 2 Posts Drives: 2005 E90 320d Join Date: May 2009 Location: Munich iTrader: (0)	Check your existing wheel This screw and wire should already be there in your old wheel...
	Appreciate 0 Quote

06-12-2009, 12:09 PM	#643
nitty90 New Member 2 Rep 7 Posts Drives: 325i Join Date: Jun 2009 Location: Singapore iTrader: (1)	E90 Sports wheel Hi there,newbie here.I wanna replace the standard steering with the M tech version. Anyone can advise how to remove the multifunction connectors on both sides? I tried to pull them off but they seem to be tight in position and there is no 'slots' to insert a watchmaker to pry out the connectors. Any kind soul can advise? Many thanks Attached Images
	Appreciate 0 Quote

06-20-2009, 08:38 PM	#644
Rogue_Marine Second Lieutenant 16 Rep 247 Posts Drives: E90 330i TiAg/E30 325ix Zinno Join Date: Mar 2009 Location: Utah iTrader: (2) Garage List 2006 330i [0.00] 1989 325ix [0.00]	Thanks Bavarian19 for the great DIY! I just completed my swap to the M-Sport Perforated Steering Wheel and everything worked without a problem. __________________ '06 E90 330i Titanium Silver Metallic/ZPP/ZSP Pics threads: http://www.e90post.com/forums/showthread.php?t=266753 http://www.e90post.com/forums/showthread.php?t=277178 Last edited by Rogue_Marine; 06-21-2009 at 10:29 AM..
	Appreciate 0 Quote

09-14-2009, 08:13 PM	#645
akack79 Brigadier General 147 Rep 3,165 Posts Drives: G80 M3 Join Date: Sep 2007 Location: T E X A S iTrader: (18)	Thanks for everyone that contributed to this DIY, a lot easier than I imagined!! __________________ 2018 F80 M3 6MT ZCP Last edited by akack79; 09-14-2009 at 11:21 PM..
	Appreciate 0 Quote

09-14-2009, 09:11 PM	#646
Kurfer Private 5 Rep 66 Posts Drives: 2013 335i Coupe Join Date: Aug 2008 Location: Indiana iTrader: (0)	What a great DIY! Finished my install in about 1 hour, hardest part was getting the paddle shifters unplugged. Now to sell my old wheel! Thanks!
	Appreciate 0 Quote

09-17-2009, 06:54 PM	#648
Yinger Lieutenant 18 Rep 415 Posts Drives: 2009 335i e92 6MT Join Date: Jan 2009 Location: Irvine, CA iTrader: (14) Garage List 2009 e92 335i [10.00]	Great write up! Followed the instructions exactly and took about 45 min for the install. Installed the M3 tri stitched which is installed exactly the same way.
	Appreciate 0 Quote

09-18-2009, 04:53 AM	#649
Roleez E60 to E90 to E92 3 Rep 107 Posts Drives: 2011 E92 335i M-Sport 6MT Join Date: Sep 2009 Location: NorCal iTrader: (0)	Props to the originator of this thread! Bought a CPO 330i in which the previous owner wore out the black color of the steering wheel to the bare SKIN! I'd expect that in a car with over 100K, but not 24K. Followed the DIY steps to install an M-tech wheel in less than an hour. Now it feels like I'm driving my M5 again! __________________ 2011 E92 335i 6MT (Space Gray/Coral): M-Sport / Premium / Convenience / Navi / L7 / InvisiGuard / Dinan Exhaust & Pedals 2011 CR-Z EX 6MT, 2008 GSX-R600 RETIRED: 2008 Dinan M5 SMG, 2006 330i 6MT, 2006 Dinan 550i 6MT, 1992 Accord EX 5MT
	Appreciate 0 Quote

10-19-2009, 09:04 PM	#650
klerk Private First Class 39 Rep 198 Posts Drives: 2014 F32 Join Date: Oct 2009 Location: austin iTrader: (0)	new member here. m sport wheel will be the first thing i change to my new 335i. does anyone know the difference between the following wheel pn's: 32 307 906 846 32 307 839 114 i've seen both numbers referenced in different DIY's. TIA.
	Appreciate 0 Quote

10-20-2009, 05:45 PM	#651
g9sBMW Lieutenant 25 Rep 517 Posts Drives: 2007 BMW 328i Join Date: Mar 2007 Location: Los Angeles iTrader: (8) Garage List 2007 328i Sedan [0.00]	getbmwparts says Part number 32307906846 was superceded by part number 32307839114. __________________ [2007 328i\|Black Sapphire\|Terra Leather\|6 MT\|Xenon headlights\|BMW Alarm\|Clear Bra\|Stainless Steel Pedal Pads\|Black Line Tails\|MTEC V3.0 Angel Eyes\|HUPER OPTIK 30 Ceramic TINT\|GPThunder Fogs\|LED License Plate mod\|Sport Shocks/Springs upgrade\|ZHP Shift Knob\|//M Dead Pedal\|Matte Black Grill\|Aluminum Strut Bar\|Cyba Air Scoops\|Rear Fog Switch\|Perforated Mtech Wheel\|Miro 935s\|Hankook v12 evo Tires\|BMW SSK]\| BMW PE
	Appreciate 0 Quote

10-20-2009, 09:17 PM	#652
klerk Private First Class 39 Rep 198 Posts Drives: 2014 F32 Join Date: Oct 2009 Location: austin iTrader: (0)	does anyone know if there are any physical differences between the two wheels? i assume i should stick with the 114? Last edited by klerk; 10-20-2009 at 09:44 PM..
	Appreciate 0 Quote

10-28-2009, 01:50 AM	#653
aquaanox First Lieutenant 28 Rep 307 Posts Drives: e92 328, e90 335 Join Date: Jun 2007 Location: rockville md iTrader: (6)	So i have done this mod successfully on my 328 e92 MT , and just picked up a 335 auto sedan with paddles today. The thing is, i dont really want the pedals, can i simply get a m wheel without paddles, and not put the paddles back in ? (vs having to buy one with the cutouts etc) will that work, anyone done this ?
	Appreciate 0 Quote

10-28-2009, 02:33 PM	#655
g9sBMW Lieutenant 25 Rep 517 Posts Drives: 2007 BMW 328i Join Date: Mar 2007 Location: Los Angeles iTrader: (8) Garage List 2007 328i Sedan [0.00]	If you're wheel doesnt have the screw and grounding point. Find a screw at hardware store and u can fabricate the grounding pin with a speaker terminal crimp on available radioshack, pepboys etc. good luck __________________ [2007 328i\|Black Sapphire\|Terra Leather\|6 MT\|Xenon headlights\|BMW Alarm\|Clear Bra\|Stainless Steel Pedal Pads\|Black Line Tails\|MTEC V3.0 Angel Eyes\|HUPER OPTIK 30 Ceramic TINT\|GPThunder Fogs\|LED License Plate mod\|Sport Shocks/Springs upgrade\|ZHP Shift Knob\|//M Dead Pedal\|Matte Black Grill\|Aluminum Strut Bar\|Cyba Air Scoops\|Rear Fog Switch\|Perforated Mtech Wheel\|Miro 935s\|Hankook v12 evo Tires\|BMW SSK]\| BMW PE
	Appreciate 0 Quote

10-29-2009, 05:31 PM	#657
MounisM Private First Class 15 Rep 135 Posts Drives: 2006 330XI Join Date: Aug 2008 Location: NY iTrader: (0)	Hi i replaced my steering wheel with a new steering wheel. I had a non sport 06 330xi. I did everything that was told. Now when i turned the car on. i get the 4x4 sign and also break sign in orange? i think they are the only 2 sign that are on?? any help i hope i told everything.
	Appreciate 0 Quote

10-31-2009, 01:19 AM	#658
curtistealer New Member 0 Rep 5 Posts Drives: e90, 2007 Join Date: Apr 2009 Location: Seoul, Korea iTrader: (0)	It's pretty confused.. I have e90 2007 320cp I've bought steering wheel, airbag module and coil spring cartridge.. 1)Steering wheel w/ paddle shift (Part No. 32306777631) 2)Airbag module (Part No. 32306770515) 3)Coil spring cartridge (Part No. 61316989557) I want these paddle working as OEM. So I took the 2 cable lines from gear box to fit in coil cartridge. Picture below is coil cartridge and steering wheel cable. I assume that red- marked green plug which came from the steering wheel has shift up/down signal. but my coil cartridge doesn't have pins for that..Instead there's only two plastics.. should i buy another coil cartridge? or... what should i do?
	Appreciate 0 Quote

11-11-2009, 03:56 PM	#659
catch Major General 670 Rep 7,148 Posts Drives: F80 M3 Join Date: Jan 2009 Location: Thornhill iTrader: (27)	I jsut did this install in literally 15 min... great DIY here! if it werent for this I woudl have brought it somewhere to get done. Anyone looking to do this and is scared, dont worry, these instructions make it look harder then it actually is! __________________ 2016 F80 M3 Mineral White/Sakhir Orange 2013 BMW S1000RR Flat Silver <stolen> 2007 BMW E92 335i Jet Black/Jade Grey <sold>
	Appreciate 0 Quote

11-12-2009, 01:06 PM	#660
Kg810 Second Lieutenant 6 Rep 230 Posts Drives: .:R32 Join Date: Aug 2009 Location: Calgary, AB iTrader: (6)	Hey, quick question here... So if I am going from non-sport steering wheel -> m-tech... do I still have to go through the steps of removing the airbag and stuff? Or is there anyway to just remove the whole non-sport steering wheel and put on my m-tech steering wheel? Thanks.
	Appreciate 0 Quote