[shawnsheridan]

Originally Posted by cesararoche

Hi Shawnsheridan!

Can you share me the v3.47.10? Thanks man

No, sorry, I do not have this old version of ISTA.

[cesararoche]

Originally Posted by shawnsheridan

No, sorry, I do not have this old version of ISTA.

Thanks mate, can you share the oldest version that you have?.

Thanks a lot.

[shawnsheridan]

Originally Posted by cesararoche

Thanks mate, can you share the oldest version that you have?.

Thanks a lot.

PM sent.

[masion]

I try to looking for the ISTA and INPA version which can work with my E93 2008 ,can anyone help me ?

[shawnsheridan]

Originally Posted by masion

I try to looking for the ISTA and INPA version which can work with my E93 2008 ,can anyone help me ?

PM sent.

[sowbmw]

Hi, can you help me out with ista as well? Thank you so much.

[shawnsheridan]

Originally Posted by sowbmw

Hi, can you help me out with ista as well? Thank you so much.

PM sent.

[pixelranger6930]

Hi! I'd also love to have the link for ISTA. Thanks in advance!

[shawnsheridan]

Originally Posted by pixelranger6930

Hi! I'd also love to have the link for ISTA. Thanks in advance!

PM sent.

[Wellcraft]

I have an e46, an e92 m3, and an f15. I would like to get the correct software that works with my car. Was told I need ista and ncsexpert. Can someone please provide me with the links, I'm currently in the middle of an e46 manual swap and will need to do some coding.

Thanks in advance

[shawnsheridan]

Originally Posted by Wellcraft

I have an e46, an e92 m3, and an f15. I would like to get the correct software that works with my car. Was told I need ista and ncsexpert. Can someone please provide me with the links, I'm currently in the middle of an e46 manual swap and will need to do some coding.

Thanks in advance

PM sent.

[SeekingCylinders]

Hey, looking for INPA and ISTA+ for my E91. I think Im going to have to replace the injectors, am I able to code the new ones with either of these pieces of software?

[shawnsheridan]

Originally Posted by SeekingCylinders

Hey, looking for INPA and ISTA+ for my E91. I think Im going to have to replace the injectors, am I able to code the new ones with either of these pieces of software?

PM sent.

[cat8]

Originally Posted by shawnsheridan

PM sent.

tried installing INPA from the disc and getting compiling script error, does it mean my software is missing something?

need to read transmission error code, is INPA what I need? PM me please

[shawnsheridan]

Originally Posted by cat8

tried installing INPA from the disc and getting compiling script error, does it mean my software is missing something?

need to read transmission error code, is INPA what I need? PM me please

INPA or Tool32, or ISTA or any Fault Code Reader can be used. PM sent.

[Quipper]

Hello,

its my first post here to hope someone can help me.

I have an E70 LCI with N57 and need an old ISTA Version for diagnostic and programming if possible

INPA is working but not with all units and with ISTA 4.39.20 i cant get diagnostic to work with k+dcan cable.
Thanks

[shawnsheridan]

Originally Posted by Quipper

Hello,

its my first post here to hope someone can help me.

I have an E70 LCI with N57 and need an old ISTA Version for diagnostic and programming if possible

INPA is working but not with all units and with ISTA 4.39.20 i cant get diagnostic to work with k+dcan cable.
Thanks

I don't have any older versions. Did you setup both EDIBAS.ini and OBD.ini use with your K+DCAN Cable?

[JoshS98]

Hey Anyone have a copy of ISTA P they could send my way.

Got ISTA+ running which replaces ISTA D for my car from what i have seen. But since I have a 2006 325i e90 pretty sure I need ISTA P to do any programming and ISTA+ just can do the diagnostic stuff ISTA D did.

Hope I got that right, if not please feel free to correct me . Feeling very confused here.

Followed a guide to get BMW standard tools running on my mac and I have everything working so far but there was no ISTA P with the download only ISTA+ and other non ISTA tools

Currently stuck and needing to code in a new battery replacement. 1st owner of car replaced the h8 AGM with a random GMC ACDELCO battery. Picked up the car last Thursday and have gotten messages about a battery issue so was planning to replace that but this whole ISTA issue threw a wrench in my plans.

[shawnsheridan]

Originally Posted by JoshS98

Hey Anyone have a copy of ISTA P they could send my way.

Got ISTA+ running which replaces ISTA D for my car from what i have seen. But since I have a 2006 325i e90 pretty sure I need ISTA P to do any programming and ISTA+ just can do the diagnostic stuff ISTA D did.

Hope I got that right, if not please feel free to correct me . Feeling very confused here.

Followed a guide to get BMW standard tools running on my mac and I have everything working so far but there was no ISTA P with the download only ISTA+ and other non ISTA tools

Currently stuck and needing to code in a new battery replacement. 1st owner of car replaced the h8 AGM with a random GMC ACDELCO battery. Picked up the car last Thursday and have gotten messages about a battery issue so was planning to replace that but this whole ISTA issue threw a wrench in my plans.

Realized I cannot get PMs due to being a new member. My discord is .J0shua. or joshsaxon@hotmail.ca is my email. Hope sharing those is not against the rules. My own info so I do not mind it being shared to get me some help faster potentially

PM sent.

[chippychip]

I’d love to know how to get ista p and the Daten files so that I can finally update my cars transmission ECU!

Anyone know where I can the software and files?

[ltbarber]

My install seems to be broken. Could I get a fresh link please? TIA

[shawnsheridan]

Originally Posted by chippychip

I’d love to know how to get ista p and the Daten files so that I can finally update my cars transmission ECU!

Anyone know where I can the software and files?

Originally Posted by ltbarber

My install seems to be broken. Could I get a fresh link please? TIA

PM's sent.