[ThorsHammer]

Frank for the win! Thanks for the PM, buddy.

[Daya]

Those space gray pics look familiar

In all seriousness, now that I do have them on they look awesome and complete the look of my car. There is the slight bulge on the driver's side, but I don't even really notice it anymore.

[gone]

Originally Posted by shogrence

Frank from MFD gave me a phone call and after reviewing the pictures I sent they are sending me a whole new set of M3 style sideskirts. They agreed that the fit was not correct and want to replace the old ones because of the hairline cracking happening on the passenger side, as well. They are going to try and have them out to me within about a week. A buddy of mine has looked at the original skirts and the new ones and he will put these replacement ones on for me when they get here so I am not out anymore money with the BMW body shop. Fingers crossed!!!

You guys were right about Frank being very customer oriented and wanting to help. I will update l8tr.

Got confirmation from Frank that my new side skirts are being shipped today, 27 August. I will update and take some new pictures to show, once I receive and have them installed.

[cn555ic]

I hope you guys that are getting the replacement ones will be as happy as I have been with my skirts, and even the guys that are getting their orders finally...It seems as though speaking to them they have resolved all the inherent glitches...

[kyleb350]

The only issue with mine was that they stuck out just a bit on the top near the front.

[I_can_drive_stick_now]

Frank's da Man!!! Got the skirts today, but car is in the dealership for HPFP like symptoms Will put it on as soon as I possibly can. Packaging and paint matching are impeccable as always. Not sure how the holes line up since I dont have my car.

I found a roll of 3M tapes, is there certain spot that might be lose and will require 3M tapes?

[cn555ic]

Originally Posted by I_can_drive_stick_now

Frank's da Man!!! Got the skirts today, but car is in the dealership for HPFP like symptoms Will put it on as soon as I possibly can. Packaging and paint matching are impeccable as always. Not sure how the holes line up since I dont have my car.

I found a roll of 3M tapes, is there certain spot that might be lose and will require 3M tapes?

You are going to be VERY VERY happy with these new ones that you got for sure!!

Better than OEM without modifications, now finally its a direct fitment!!!!!!!!!!!!!!!

Do I smell Hotcakes! lol

Driver's side pics showing length of sideskirt and flushness PERFECT in the front...!!

[s1cke92]

can i get a video sound clip of the simota intake for e92 335i

[Sparky66]

Heck........ how about an unbiased independant Dyno run comparing stock air filter verses Simota 335 Air Intake..........I'd never buy this just on looks and sound. That's justs stupid.

Seems like M-Force Design don't even want a sale here, because if they had any intent in selling these, they would provide us with the data we so desperately need.

Since I believe they are just shifting boxes along with no real collateral gain, they have no interest to even bother to respond to any potential customers............great business plan

[Frank@M-Force_Design]

I am trying to ask members who bought the intake to post us some video clips

[ThorsHammer]

Just got a call from my shop. They said my replacement driver's side went on perfectly!!!!

I'm so excited to finally have everything completed. I will pick her up today and post some pics this weekend.

THANKS FRANK!!!!!!!

[cn555ic]

Originally Posted by ThorsHammer

Just got a call from my shop. They said my replacement driver's side went on perfectly!!!!

I'm so excited to finally have everything completed. I will pick her up today and post some pics this weekend.

THANKS FRANK!!!!!!!

I told you!!

[ThorsHammer]

So, as it turns out, the replacement skirt didn't fit too well either, because by the time I got it home, the front had popped out again. But this time, I had them just glue the fucking thing on. So....without further adieu. What do you think?

The first pic is a "before". The rest are all after.

[cn555ic]

Originally Posted by ThorsHammer

So, as it turns out, the replacement skirt didn't fit too well either, because by the time I got it home, the front had popped out again. But this time, I had them just glue the fucking thing on. So....without further adieu. What do you think?

The first pic is a "before". The rest are all after.

I think it looks hot....Looks so much more aggressive with the M3 sideskirts than without it from your before and after pics...I am glad you got them to work, even with some glue, which I also used a little to make them stay on for good....I look at it this way, at this point if I need to change them out, its because they are damaged and the betalink glue that I used would pose no problems, and if thats the case I would buy another set from them anyways! At this point I think they have a pretty damn good product especially since they fixed from your pictures the driver's side length issue!!

[**335i**]

first picture looks like there is no any side skirts installed but looking into another photos it looks hot i am not talking about pictures with fitment, its horrible, anyways still dont understand after 1 year or more waiting how mfroce cant made skirts to fit 100% for people that buy them

here are my m3 sides oem ones

[cn555ic]

Originally Posted by **335i**

first picture looks like there is no any side skirts installed but looking into another photos it looks hot i am not talking about pictures with fitment, its horrible, anyways still dont understand after 1 year or more waiting how mfroce cant made skirts to fit 100% for people that buy them

here are my m3 sides oem ones

OEM ones look really nice especially with the M labels...Before you give your review of Thorshammers fitment with the sideskirts, you should have yours installed first to see about which has better fitment!!! We will all wait to see what your outcome of modifications will be with your OEM M3 sideskirts...I hope you get them to look as good as the M-force ones! BTW Thorshammers first pic is before the sideskirts installed....Which picture are you referring to as fitment issues?

[MFKN3]

Originally Posted by kyleb350

The only issue with mine was that they stuck out just a bit on the top near the front.

me too... what happened to those replacement bolts Frank?

[shiggy]

SWEET!!!!!....let us know how it goes with the install!!!!
if you have a chance...perhaps a DIY would be great too!!!

Originally Posted by **335i**

first picture looks like there is no any side skirts installed but looking into another photos it looks hot i am not talking about pictures with fitment, its horrible, anyways still dont understand after 1 year or more waiting how mfroce cant made skirts to fit 100% for people that buy them

here are my m3 sides oem ones

[cn555ic]

Originally Posted by shiggy

SWEET!!!!!....let us know how it goes with the install!!!!
if you have a chance...perhaps a DIY would be great too!!!

For once, Shiggy I agree with you, a DIY on how to modify the OEM ones to make them fit PERFECT....subscribed

[Daya]

I had my shop just glue the driver's side to keep the front from coming loose as well

[**335i**]

Originally Posted by cn555ic

For once, Shiggy I agree with you, a DIY on how to modify the OEM ones to make them fit PERFECT....subscribed

found only one diy http://www.e90post.com/forums/showth...ht=side+skirts posted by you, hope my shop will know what to do with them

[gone]

Originally Posted by shogrence

Got confirmation from Frank that my new side skirts are being shipped today, 27 August. I will update and take some new pictures to show, once I receive and have them installed.

Received replacement set of side skirts from MFD and installed them today. Better fit than before but still not OEM replacement perfect fit. No bulges or sides sticking out with these. Front part of side skirt still not staying popped in place so BMW Betalink-K1 glue it was. There was probably a reason both of the last 2 sets came with a roll of 3M tape in the boxes. At least no splitting and cracking in fiberglass this time. Nice idea and would be 100% great if just met the advertised "OEM swap out fitment". 6 months into this and multiple times taking stuff on and off...stick a fork in me. I am done.