Take 3: Vishnu 335i coupe Tuning Update

GAaaAR · 10-30-2006, 01:22 PM

Quote:

Originally Posted by priesh

I was just looking at shiv's video through a program called virtualdub which gives you per frame control with milisecond timings, but i wasn't to certain of when to start the 0-60 timing, from when the revs start heavily increasing or when the speedo needle moves from 0?

Anyway if you do it from when the speedo moves from 0, when the rpm is at 2400, and cut the video when it is at the frame where the needle hits 60, you get 4.2 seconds! You get 100mph at 9.4 seconds.

If you do it from the start of the heavy rpm increase (i.e. from 1400rpm) you get a 0-60 of 5 seconds and 100mph at 10 seconds.

Sorry for being overly geeky

Priesh

I believe you should start timing when the needle starts moving, because shiv had to bring his rpm up to launch the car. So the rpm can move up but until he drop the the clutch and the car begans to go into motion, the timing shouldn't begin.

jacksonjw81 · 10-30-2006, 01:23 PM

Quote:

Originally Posted by shiv@vishnu

If your interested, go ahead and add your name in here:
http://www.e90post.com/forums/showthread.php?t=34912

How much is the group buy going to be?

OpenFlash · 10-30-2006, 01:31 PM

Quote:

Originally Posted by jacksonjw81

How much is the group buy going to be?

Dyno days really aren't considered group guys. They are just groups of people who aren't able to drive out to us. Instead, they pitch in to get me out to them. It usually works out to be a little bit more expensive than coming out to see to us due to 3rd party dyno rental. Not to mention airline tickets and lodging. In this case, total costs involved for participants is $1300 (xede) plus $60-100 (est per car dyno rental) plus $50-70 (partial plan ticket for me!). Usually, we charge an additional $350-375 for the actual tuning. But in this case of early adopters, we're waiving that.

-shiv

priesh · 10-30-2006, 01:35 PM

Quote:

Originally Posted by GAaaAR

I believe you should start timing when the needle starts moving, because shiv had to bring his rpm up to launch the car. So the rpm can move up but until he drop the the clutch and the car begans to go into motion, the timing shouldn't begin.

Then it definitely comes out as 4.2 seconds 0-60

boosted · 10-30-2006, 01:39 PM

Good results Shiv

I'm curious what is the drivetrain loss (%) difference between the steptronic and manual since I'm thinking to get an automatic so then my wife can drive when I need to take her X5. What I'm also happy to see that the weight difference between 6AT/6MT is not much along with gear ratios

vs. other makes/models where automatics typically weigh over 60lbs more and gear ratio are far apart.

Ted · 10-30-2006, 01:43 PM

Quote:

Originally Posted by ICALL

I remember reading earlier that the automatic can actually handle more power. I think the answer is somewhere in this thread. If its not here, google "vishnu 335i" and read the threads that come up too. Its great reading even if you find it here first.

Here you go
http://www.e90post.com/forums/showthread.php?t=34676

lcrain · 10-30-2006, 02:14 PM

4.2 seconds is pretty amazing....i wonder what time shiv would have clocked when his car was stock...

sstarch1 · 10-30-2006, 02:16 PM

Quote:

Originally Posted by shiv@vishnu

Dyno days really aren't considered group guys. They are just groups of people who aren't able to drive out to us. Instead, they pitch in to get me out to them. It usually works out to be a little bit more expensive than coming out to see to us due to 3rd party dyno rental. Not to mention airline tickets and lodging. In this case, total costs involved for participants is $1300 (xede) plus $60-100 (est per car dyno rental) plus $50-70 (partial plan ticket for me!). Usually, we charge an additional $350-375 for the actual tuning. But in this case of early adopters, we're waiving that.

-shiv

Shiv, i was hoping for a XEDE/Exhaust install in the spring of '07.
Is this possible?

eshtog · 10-30-2006, 02:20 PM

Sign me up, im in Portland and would like the XEDE with the exhaust.

PresaMat · 10-30-2006, 02:21 PM

Quote:

Originally Posted by shiv@vishnu

Dyno days really aren't considered group guys. They are just groups of people who aren't able to drive out to us. Instead, they pitch in to get me out to them. It usually works out to be a little bit more expensive than coming out to see to us due to 3rd party dyno rental. Not to mention airline tickets and lodging. In this case, total costs involved for participants is $1300 (xede) plus $60-100 (est per car dyno rental) plus $50-70 (partial plan ticket for me!). Usually, we charge an additional $350-375 for the actual tuning. But in this case of early adopters, we're waiving that.

-shiv

What about exhaust? I know its not ready yet... but should we wait until it is so we can have the car tuned with the exhaust?

kingbriani · 10-30-2006, 02:25 PM

Quote:

Originally Posted by lcrain

4.2 seconds is pretty amazing....i wonder what time shiv would have clocked when his car was stock...

whats even more amazing is that that was with the DTC on. with some fatter/stickier tires and better road conditions this car will fly.

canuck335i · 10-30-2006, 03:08 PM

Quote:

Originally Posted by kingbriani

whats even more amazing is that that was with the DTC on. with some fatter/stickier tires and better road conditions this car will fly.

LSD would also help for better launch...

OpenFlash · 10-30-2006, 04:07 PM

Quote:

Originally Posted by PresaMat

What about exhaust? I know its not ready yet... but should we wait until it is so we can have the car tuned with the exhaust?

The exhaust wont be ready for a while. We're going to do a proper production run which will probably take 2-3 months. In the meantime, we're going to look at other parts of the system (intake, downpipes, intercooler, etc,.) For the time being, I'd like to keep things simple and manageable and just off the Xede. On 93oct, it'll do very well just by itself.

shiv

OpenFlash · 10-30-2006, 04:09 PM

Quote:

Originally Posted by sstarch1

Shiv, i was hoping for a XEDE/Exhaust install in the spring of '07.
Is this possible?

That should not be a problem.

-Shiv

PresaMat · 10-30-2006, 04:27 PM

Quote:

Originally Posted by shiv@vishnu

The exhaust wont be ready for a while. We're going to do a proper production run which will probably take 2-3 months. In the meantime, we're going to look at other parts of the system (intake, downpipes, intercooler, etc,.) For the time being, I'd like to keep things simple and manageable and just off the Xede. On 93oct, it'll do very well just by itself.

shiv

I dont know how much information you can give out... But is there anything super special about the vishnu exhaust? I would love to buy it... but if its going to be a while would it be possible to have the XEDE with say another companies exhaust while still getting the same kinda power? I would rather stay all Vishnu but I have very bad patience

.

sstarch1 · 10-30-2006, 04:35 PM

Quote:

Originally Posted by PresaMat

I dont know how much information you can give out... But is there anything super special about the vishnu exhaust? I would love to buy it... but if its going to be a while would it be possible to have the XEDE with say another companies exhaust while still getting the same kinda power? I would rather stay all Vishnu but I have very bad patience

.

I would assume if you have shiv tune the XEDE to your exhaust it would be fine, just have to catch him on one of the dyno days or see him in Danville.

Waldorf · 10-30-2006, 04:52 PM

I, for one, would like to buy the final Xede mapped for the stock exhaust system. I really like the car's sound as it is.

My Ducati is loud enough

sflgator · 10-30-2006, 05:05 PM

Quote:

Originally Posted by Waldorf

I, for one, would like to buy the final Xede mapped for the stock exhaust system. I really like the car's sound as it is.

My Ducati is loud enough

This is what Shiv is coming out with first -- the Xede-only kit (mapped for the stock exhaust) to add approx. 30+HQ/30+TQ.

jerrygarcia · 10-30-2006, 05:10 PM

Let me get this straight shiv - it is not required to have you specially tune the car right? One could just buy the xede say off your website or by phone and will be able to just plug and play correct?

PresaMat · 10-30-2006, 05:23 PM

Quote:

Originally Posted by jerrygarcia

Let me get this straight shiv - it is not required to have you specially tune the car right? One could just buy the xede say off your website or by phone and will be able to just plug and play correct?

Jerry this is correct. It looks like there is going to be a nice ammount of people in houston though... so a dyno day is definately a possibility. I for one though would like to wait until exhaust is available to have a custom tune (get the most bang for the buck).

jerrygarcia · 10-30-2006, 05:25 PM

The thing is I will most likely not be getting the car till summer of 07, but I thanks for the info!

suzaku · 10-30-2006, 06:07 PM

Quote:

Originally Posted by shiv@vishnu

If your interested, go ahead and add your name in here:
http://www.e90post.com/forums/showthread.php?t=34912

Never mind. Added my name to the Chicago group buy

10-30-2006, 01:39 PM	#665
boosted enthusiast 116 Rep 221 Posts Drives: 2018 340i x-drive 8AT Join Date: Sep 2006 Location: IL iTrader: (0)	Good results Shiv I'm curious what is the drivetrain loss (%) difference between the steptronic and manual since I'm thinking to get an automatic so then my wife can drive when I need to take her X5. What I'm also happy to see that the weight difference between 6AT/6MT is not much along with gear ratios vs. other makes/models where automatics typically weigh over 60lbs more and gear ratio are far apart.
	Appreciate 0 Quote

10-30-2006, 02:14 PM	#667
lcrain Captain 60 Rep 865 Posts Drives: e36 m3, TT-RS Join Date: Sep 2006 Location: Dallas, TX iTrader: (1)	4.2 seconds is pretty amazing....i wonder what time shiv would have clocked when his car was stock...
	Appreciate 0 Quote

10-30-2006, 02:20 PM	#669
eshtog Lieutenant 22 Rep 441 Posts Drives: 2002 E39 M5 Join Date: Aug 2005 Location: Portland, Oregon iTrader: (4)	Sign me up, im in Portland and would like the XEDE with the exhaust.
	Appreciate 0 Quote

10-30-2006, 04:52 PM	#677
Waldorf Black Opps field agent 38 Rep 449 Posts Drives: 135i M Join Date: Oct 2006 Location: YUL iTrader: (1) Garage List 2006 Z4 M Coupe [7.75] 2007 Ducati Monster ... [0.00]	I, for one, would like to buy the final Xede mapped for the stock exhaust system. I really like the car's sound as it is. My Ducati is loud enough __________________ ------------------- :rocks: Montreal to Vermont OktoberFast cruise. :rocks: http://www.e90post.com/forums/showthread.php?t=79557
	Appreciate 0 Quote

10-30-2006, 05:10 PM	#679
jerrygarcia Lieutenant 20 Rep 489 Posts Drives: 335 sedan eventually Join Date: Sep 2006 Location: Houston iTrader: (0)	Let me get this straight shiv - it is not required to have you specially tune the car right? One could just buy the xede say off your website or by phone and will be able to just plug and play correct?
	Appreciate 0 Quote

10-30-2006, 05:25 PM	#681
jerrygarcia Lieutenant 20 Rep 489 Posts Drives: 335 sedan eventually Join Date: Sep 2006 Location: Houston iTrader: (0)	The thing is I will most likely not be getting the car till summer of 07, but I thanks for the info!
	Appreciate 0 Quote